Current Sensors & Voltage Regs
The output of the bridge voltage is bipolar and proportional to the current through the strap over a -80 to +80 mA input range. The sensing element of this device is a bridge of GMR resistors whose resistance varies with applied magnetic field. Typical sensitivity is 2mV/mA with a 24 V supply and no amplification. The sensors are targeted at circuit board current sensing for process control and instrumentation. Their sensitivity makes them ideal for isolated 4-20 mA current loop detection. These devices are suitable for both AC and DC current measurement.
- -80 mA to +80 mA linear range
- AC or DC Measurement
- 2 mV/mA sensitivity
- Ultraminiature TDFN Package
The DC series regulators provide a wide input voltage range, up to 45V, and are available in 3.3V and 5.0V outputs. They feature reverse battery protection and excellent immunity to transients and noise allowing for reduction of other filtering devices at the PCB level.
- 5.0V and 3.3V regulated output
- Input voltage to 36VDC (Max Rating 45VDC)
- Reverse battery protection
- 2.5mm x 2.5mmTDFN6 package