 |
| 10W 0.5% 2mΩ-1Ω low ohm resistor PBH series |
|
Designed to be mounted on a heatsink, this device has a very low TC, and is available down to 2 milliohms. TO247 style
|
10 W ( on suitable heatsink )
2mΩ to 1Ω
0.5%, 1 % tolerance
50 ppm/°C ( 20 °C to 60 °C )TC |
|
|
|
|
 |
| 10W 30ppm 0.5mΩ-1Ω precision low ohm PBV series |
|
Derived from the PBH. It has Kelvin terminations to minimize TC and terminal resistance variations.
|
10 W ( on suitable heatsink )
0.5mΩ to 1Ω
0.5%, 1 % tolerance
30 ppm/°C ( 20 °C to 60 °C )TC |
|
|
|
|
 |
| 15W 0.02Ω to 1K heatsink mount resistor MP915 series |
|
Ideal for new power designs. These devices replace conventional bulky power resistors. The low inductance makes them suitable for snubber applications.
|
15W ( on suitable heatsink )
0.02Ω-1KΩ
Non-inductive design.
Space saving TO-126 package |
|
|
|
|
|
 |
| 25W 5KΩ to 100KΩ heatsink mount resistor MP925 series |
|
The MP925 is a higher voltage heatsink mount device allowing voltages of up to 500V, and resistance values as high as 100K. This device can replace conventional bulky power resistors. The low inductance makes it suitable for snubber applications.
|
25W ( on suitable heatsink )
5KΩ to 100KΩ
Non-inductive design
Max. voltage 500V |
|
|
|
|
 |
| 25W & 50W 0.022Ω-50KΩ metal clad resistors RH series |
|
These devices offer a high stability at conventional power ratings, and are also available in non inductive versions.
|
20W & 50W ( on suitable heatsink )
22mΩ to 50KΩ
5x power overload ( 5 seconds )
Inductive or non-inductive windings |
|
|
|
|
 |
| 30W low profile metal clad resistors IRS series |
|
The IRS30 is a metal-clad, wire-wound high-power resistor. The most common applications for this model are motor drives, braking & snubber applications and power sources for industrial equipment.
|
30W
1Ω-500Ω
Low profile
2500V dielectric strength |
|
|
|
|
 |
| 30W 0.02Ω to 1KΩ heatsink mount resistor MP930 series |
|
Ideal for new power designs. These devices replace conventional bulky power resistors.The low inductance makes them suitable for snubber applications.
|
30W ( on suitable heatsink )
0.02Ω-4.99KΩ
Non-inductive design for high speed switching, snubbers and RF applications
Space saving TO-220 package |
|
|
|
|
|
| 50W low profile metal clad resistors IRS50 series |
|
The IRS50 is a metal-clad, wire-wound high-power resistor. The most common applications for these models are motor drives, braking & snubber applications and power sources for industrial equipment.
|
50W
10Ω-150Ω
Low profile
2500V dielectric strength |
|
|
|
|
 |
| 50W 1mΩ to 0.5Ω heatsink mount resistor RTO-B seires |
|
This resistor has a 4-terminal Kelvin connection which allows accurate current measurement at resistances as low as 1mΩ. This part is available with a TC of 20ppm.
|
50W
1mΩ to 0.5Ω ( 4 values )
150 A constant current ( 1 mOhm )
Kelvin ( 4 terminal ) connection |
|
|
|
|
Rhopoint Sourcing
