 |
| K, E & T type butt bonded 20100 series |
|
Type K, E and T foil thermocouples, with a response time down to 1ms, these devices are flexible and can be bonded to either flat or curved surfaces.
|
-160°C to 815°C temperature range
1mS response time (grounded)
Low mass giving low thermal inertia
Flexible will bond to flat or curved surfaces |
|
|
|
|
 |
| E , T, K, J type bead welded 26700 series |
|
These versatile low cost type E, T, K, and J thermocouples can be used for a wide variety of surface temperature measurements. Response time 1 second
|
-160°C to 370°C temperature range
25mS response time
Rugged flexible construction
Low mass |
|
|
|
|
 |
| Thermocouple probe assembly RPL1-T |
|
The RPL1-T sensor is designed for a wide range of general purpose industrial applications that require a flying lead sensor. The unit is ideal for use with compression fittings or the RPL50-TW pocket. UKAS traceable calibration is available upon request.
|
-50°C to 250°C operating temperature range
K type thermocouple
UKAS traceable calibration
Can be used with compression fittings or pockets |
|
|
|
|
 |
| Thermocouple probe assembly with thread RPL2-T |
|
The RPL2-T sensor is designed for a wide range of general purpose industrial applications that require a flying lead sensor. This device has a welded process connection to simplify installation. UKAS traceable calibration is available upon request.
|
-50°C to 250°C operating temperature range
K type thermocouple
UKAS traceable calibration
|
|
|
|
|
 |
| Sensor pockets and compression fittings |
|
In many applications the RPL1-P and RPL1-T sensors need to be mounted in a fixed position within a unit, for example a pipe or other vessel. Sensor pockets and compression fittings make this a relatively simple procedure.
|
Other industry standard connections are available
Threaded
Flanged
Hygienic connections - RJT, IDF, Tri-clamp and others |
|
|
|
|
 |
| Thermocouple with terminal head RPL3-T |
|
The RPL3-T sensor has a 316 stainless steel sheath of various diameters and lengths suitable for use in a wide variety of applications. There is a choice of terminal heads available to be fitted to the sensor in which can be fitted either a terminal block or transmitter.
|
Type J, K or T thermocouple.
-50 to +250°C
Simplex or duplex
Class 1 or Class 2 tolerance band |
|
|
|
|
 |
| Thermocouple with process thread RPL4-T |
|
The RPL4-T sensor has a fixed male process connection thread supplied directly beneath a terminal head giving the user the ability to screw the sensor directly into the process or a thermowell without the need for a compression fitting.
|
Type J, K or T thermocouple.
-50 to +250°C
Simplex or duplex
Class 1 or Class 2 tolerance band |
|
|
|
|
 |
| Thermocouple with process thread & extension RPL5-T |
|
The RPL5-T sensor has a fixed male process connection thread plus a lagging extension beneath a terminal head giving the user the ability to screw the sensor directly into a process or thermowell without the need for a compression fitting.
|
Type J, K or T thermocouple.
-50 to +250°C
Simplex or duplex
Class 1 or Class 2 tolerance band |
|
|
|
|
 |
| Thermocouple with Tri-Clamp process connection RPL6-T |
|
Using an industry standard Tri-clamp connection, the RPL6-T sensor is suitable for use in many hygienic processes including dairy, brewery and pharmaceutical applications.
|
Type J, K or T thermocouple.
-50 to +250°C
Simplex or duplex
Class 1 or Class 2 tolerance band |
|
|
|
|
 |
| Thermocouple with RJT process connection RPL7-T |
|
Using an industry standard RJT connection, the RPL7-P sensor is suitable for use in many hygienic processes including dairy, brewery and pharmaceutical applications.
|
Type J, K or T thermocouple.
-50 to +250°C
Simplex or duplex
Class 1 or Class 2 tolerance band |
|
|
|
|
Rhopoint Sourcing
