Telephone +44 (0) 1342 330 470

Monday to Thursday: 08.30 to 17.00 (GMT)
Friday: 08.30 to 12.45 (GMT)

Search by Manufacturer

32 item(s) were found using the following search criteria

  • Manufacturer: Process Parameters Ltd

Don't see what you're looking for? Modify your search



Items 1 to 20 of 32 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
  1. Accessories for RPL probes

    Accessories for RPL probes

    • Instruments
    • Compression fittings
    • Thermowells and pockets
    • Themocouple wires and connectors
    More Info
  2. Compact temperature transmitter RPL23-TX

    Compact temperature transmitter RPL23-TX

    The lagging extension allows the sensor to operate at temperatures up to 250°C. UKAS or traceable calibration is available upon request..

    • -50°C to +250°C
    • 4-20mA, 2 wire
    • 10-30V d.c. loop powered
    • Class 1 or Class 2 tolerance band
    More Info
  3. Fabricated Pocket RPL51-TW series

    Fabricated Pocket RPL51-TW series

    This pocket is ideally suited for use with the RPL2, RPL4 and RPL5 sensors. Various common options are shown on this data sheet but this is not an exhaustive list, please contact us with your requirements.

    • Other industry standard connections are available
    • Threaded
    • Flanged
    More Info
  4. Mineral insulated Pt100 with terminal head RPL15-P

    Mineral insulated Pt100 with terminal head RPL15-P

    A choice of terminal heads is available to be fitted to the sensor in either a terminal block or transmitter can be fitted. UKAS or traceable calibration is available

    • -50°C to 500°C operating temperature range
    • 2, 3 or 4 wire, Simplex or Duplex
    • Class A or B tolerance band
    • UKAS traceable calibration
    More Info
  5. PPL1-P RTD probe assembly

    PPL1-P RTD probe assembly

    The PPL1-P RTD probe sensor series is designed for a wide range of general purpose industrial applications that require a flying lead Pt resistance sensor. The unit is ideal for use with compression fittings or the PPL50-TW pocket. UKAS traceable calibration is available upon request. 

    • -50°C to +250°C operating temperature range
    • Stocked in 2 Class A 3-wire PT100 sensor variations
    • UKAS traceable calibration available upon request
    • Can be used with compression fittings or pockets
    More Info
  6. PPL2-P RTD probe assembly with thread

    PPL2-P RTD probe assembly with thread

    The PPL2-P platinum probe sensor is designed for a wide range of general purpose industrial applications that require a flying lead sensor with a built in process connection. This device has a welded process connection to simplify installation meaning there is no need for compression fittings. UKAS traceable calibration is available upon request.

    • -50°C to +250°C operating temperature range
    • Stocked in 2 Class A 3-wire PT100 sensor variations
    • UKAS traceable calibration
    • No need for compression fittings
    More Info
  7. PPL3-P RTD probe with terminal head

    PPL3-P RTD probe with terminal head

    The PPL3-P platinum probe sensor with terminal head is available in various combinations and options including sensor type, head types and number of wires. These RTD probe sensors are available with up to IP68 environmental protection (KNE and KSE aluminium alloys and 316 stainless steel). 

    • -50°C to +250°C operating temperature range
    • Pt100 or Pt1000 sensor types available
    • Heads available in Aluminium, Stainless Steel, Nylon or ABS
    • Up to IP68 environmental protection
    • 2, 3 or 4 wire, Simplex or Duplex
    • Class B, Class A, 1/3 Din, 1/5 Din or 1/10 DIN tolerance bands available.
    More Info
  8. Pt100 exterior air temperature sensor RPL10-P

    Pt100 exterior air temperature sensor RPL10-P

    The sensor is fitted with a variety of surface mounting terminal housing rated at least IP66 in which we can fit either a terminal block or transmitter.

    • -40°C to 85°C operating temperature range
    • 2, 3 or 4 wire, Simplex or Duplex
    • Class A or B tolerance band
    • UKAS traceable calibration
    More Info
  9. RPL1-T Thermocouple probe assembly

    RPL1-T Thermocouple probe assembly

    The RPL1-T sensor is designed for a wide range of general purpose industrial applications that require a flying lead sensor. The unit is ideal for use with compression fittings or the RPL50-TW pocket. UKAS traceable calibration is available upon request.

    • -50°C to 250°C operating temperature range
    • K type thermocouple
    • UKAS traceable calibration
    • Can be used with compression fittings or pockets
    More Info
  10. RPL2-T Thermocouple probe assembly with process thread

    RPL2-T Thermocouple probe assembly with process thread

    The RPL2-T sensor is designed for a wide range of general purpose industrial applications that require a flying lead sensor. This device has a welded process connection to simplify installation. UKAS traceable calibration is available upon request.

    • -50°C to 250°C operating temperature range
    • K type thermocouple
    • UKAS traceable calibration
    More Info
  11. RTD air temperature sensor RPL9-P

    RTD air temperature sensor RPL9-P

    The housing allows us to fit either a simple sensor or we can include a transmitter with either 4-20mA or 0-10V output and a wide range of sensor type are availableoffering a variety of accuracies.

    • -40°C to 85°C operating temperature range
    • 2, 3 or 4 wire, Simplex or Duplex
    • Class A or B tolerance band
    • UKAS traceable calibration
    More Info
  12. RTD autoclave chamber sensor RPL18-P

    RTD autoclave chamber sensor RPL18-P

    All materials within the chamber are 316 stainless steel including the flexible armour. The probe is carefully sealed to ensure the moisture ingress into the sensor and steam escape via the chamber entry tube are prevented.

    • -50°C to 175°C operating temperature range
    • 2, 3 or 4 wire, Simplex or Duplex
    • Class A or B tolerance band
    • UKAS traceable calibration
    More Info
  13. RTD compact temperature transmitter  RPL22-TX

    RTD compact temperature transmitter RPL22-TX

    Two connector options are available offering either IP65 or IP67 environmental protection. Various common options are shown on this data sheet but this is not an exhaustive list, please contact us with your requirements. UKAS or traceable calibration is also available.

    • -50°C to 250°C operating temperature range
    • 10-30V d.c. loop powered
    • 4-20mA, 2 wire
    • UKAS traceable calibration
    More Info
  14. RTD compact temperature transmitter with plain stem RPL20-TX

    RTD compact temperature transmitter with plain stem RPL20-TX

    Two connector options are available offering either IP65 or IP67 environmental protection. Various common options are shown on this data sheet but this is not an exhaustive list, please contact us with your requirements. UKAS or traceable calibration is also available.

    • -50°C to 250°C operating temperature range
    • 2, 3 or 4 wire, Simplex or Duplex
    • Class A or B tolerance band
    • UKAS traceable calibration
    More Info
  15. RTD mineral insulated with lead RPL13-P

    RTD mineral insulated with lead RPL13-P

    The sensor can also be made in almost any length that may be required. Various common options are shown on this data sheet but this is not an exhaustive list, please contact us with your requirements. UKAS or traceable calibration is available upon request.

    • -50°C to 500°C operating temperature range
    • 2, 3 or 4 wire, Simplex or Duplex
    • Class A or B tolerance band
    • UKAS traceable calibration
    More Info
  16. RTD probe  with pocket and insert RPL8-P

    RTD probe with pocket and insert RPL8-P

    We can manufacture the sensor stem in any immersion length and process connection to meet your exact requirements. A lagging extension can also be specified and with various options available for the terminal head, including IP68 stainless steel versions, we are sure to satisfy all of your requirements.

    • -50°C to 250°C operating temperature range
    • 2, 3 or 4 wire, Simplex or Duplex
    • Class A or B tolerance band
    • UKAS traceable calibration
    More Info
  17. RTD probe with hygienic process connection  RPL6H-P

    RTD probe with hygienic process connection RPL6H-P

    The sensor stem can be manufactured in various diameters and lengths to meet your exact requirements and with various options available for the terminal head, including IP68 stainless steel versions, we are sure to satisfy all of your requirements. All welds are carefully performed to ensure they are continuous and crevice free.

    • -50°C to 250°C operating temperature range
    • 2, 3 or 4 wire, Simplex or Duplex
    • Class A or B tolerance band
    • UKAS traceable calibration
    More Info
  18. RTD probe with process head and extension  RPL5-P

    RTD probe with process head and extension RPL5-P

    The lagging extension allows the terminal head to be mounted away from the process in order to protect any electronics housed within it or to allow the head to sit above any insulation. We can manufacture the sensor stem to your own diameter and length requirements and we have plenty of options available for the sensor and terminal head.

    • -50°C to 250°C operating temperature range
    • 2, 3 or 4 wire, Simplex or Duplex
    • Class A or B tolerance band
    • UKAS traceable calibration
    More Info
  19. RTD probe with process head RPL4-P

    RTD probe with process head RPL4-P

    The sensor is useful where there are space constraints and where a lagging extension is impractical. We can manufacture the sensor stem to your own diameter and length requirements and we have plenty of options available for the sensor and terminal head.

    • -50°C to 250°C operating temperature range
    • 2, 3 or 4 wire, Simplex or Duplex
    • Class A or B tolerance band
    • UKAS traceable calibration
    More Info
  20. RTD probe with RJT process connection RPL7-P

    RTD probe with RJT process connection RPL7-P

    We can manufacture the sensor stem in various diameters and lengths to meet your exact requirements and with various options available for the terminal head, including IP68 stainless steel versions, we are sure to satisfy all of your requirements. All welds are carefully performed to ensure they are continuous and crevice free.

    • -50°C to 250°C operating temperature range
    • 2, 3 or 4 wire, Simplex or Duplex
    • Class A or B tolerance band
    • UKAS traceable calibration
    More Info

Items 1 to 20 of 32 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction