Telephone +44 (0) 1342 330 470

Monday to Thursday: 08.30 to 17.00 (GMT)
Friday: 08.30 to 12.45 (GMT)

Search by Manufacturer

57 item(s) were found using the following search criteria

  • Manufacturer: Susumu Company Ltd

Don't see what you're looking for? Modify your search



Items 1 to 20 of 57 total

per page
Page:
  1. 1
  2. 2
  3. 3

Set Descending Direction
  1. HRG high power thin film chip resistors

    HRG high power thin film chip resistors

    The new HRG series expands on the original RG series by offering a greater power handling capability. Parts are available in a 1206 chip size with a power rating of 1W which is significantly larger than the existing same size resistor offerings. The resistors have short sided terminals but with wider bottom contacts to enable the higher power handling capabilities.

    • Power rating of 1W 
    • 10Ω and 100kΩ resistance range available (±0.5%, ±50ppm/°C)
    • Available in a 1206 chip sizes
    • Operating temperature range between -55°C and +155°C
    • Temperature coefficients of ±50ppm/°C and ±25ppm/°C available
    • Tolerances of ±0.5% and ±0.1% available
    • Maximum voltage rating of 200V
    More Info
  2. KRL -T4 metal foil chip resistor series (4-Terminal)

    KRL -T4 metal foil chip resistor series (4-Terminal)

    The KRL - T4 low ohm chip resistor series with a 4 terminal design has been developed to withstand high operating temperatures and is ideal for use in applications that require the use of low EMF components.  The M type low EMF materials utilised in the foil resistors construction enable high stability TCR characteristics and accurate current measurement up to +155°C.

    • 4 terminal pad pattern for current sensing applications
    • Chip sizes of 1206 & 2512 available
    • Resistance range of 0.001Ω to 0.50Ω (E6 series)
    • ±1%, 50ppm/°C accuracy for values above 0.003Ω
    • Power rating of 1W and 2W
    • Operating temperature range -55°C to +155°C low EMF
    More Info
  3. KRL metal foil chip resistor series (long-sided terminal)

    KRL metal foil chip resistor series (long-sided terminal)

    The KRL low ohm resistor series with long sided terminals has been developed to withstand high operating temperatures and applications that require the use of low EMF components.  The C type utilises materials that can be operated to +175°C, where the M type utilises low EMF materials that are stable up to +155°C.

    • Long sided terminations
    • Foil resistor
    • Chip sizes available: 0805, 1206, 2512, 3015, 3518 & 4320
    • Resistance range of 0.001Ω to 0.5Ω (E6 series)
    • ±1%, 50ppm/°C accuracy for values above 0.003Ω
    • Power rating up to 6W
    • Choice of electrode type:
      • D - (Bottom electrode) or,
      • E - (U-shape electrode)
    • Choice of operating temperature range:
      • C - (-55°C to +175°C) or,
      • M - (-55°C to +155°C low EMF)
    • Certified AEC-Q2000 compliant.
    More Info
  4. KRL metal foil chip resistor series (short-sided terminal)

    KRL metal foil chip resistor series (short-sided terminal)

    The KRL low ohm resistor series with short sided terminals has been developed to withstand high operating temperatures and applications that require the use of low EMF components.  The C type utilises materials that can be operated to +175°C, where the M type utilises low EMF materials that are stable up to +155°C.

    • Short sided terminations
    • Foil resistors
    • Current sensing
    • Chip sizes available: 0603, 0805, 1206, 2512, 4320
    • Resistance range of 0.005Ω to 1.0Ω (E12 series)
    • ±1%, 50ppm/°C accuracy for values above 0.01Ω
    • Power rating up to 5W
    • Choice of electrode type:
      • D - (Bottom electrode) or,
      • E - (U-shape electrode)
    • Choice of operating temperature range:
      • C - (-55°C to +175°C) or,
      • M - (-55°C to +155°C low EMF)
    • Certified AEC-Q2000 compliant.
    More Info
  5. MRG anti-surge thin film chip resistor series

    MRG anti-surge thin film chip resistor series

    The MRG anti-surge thin film chip resistor series from Susumu Co., Ltd offers significantly improved anit-surge capabilities compared to the existing thin film resistors they have to offer. The thin film structure enables low noise and anit-sulfur. Parts are available in 0805, 1206 and 2010 chip sizes with voltage ratings of 150V, 200V and 300V respectively.

    • Significant improvement of anti-surge capability compared to existing thin film resistors.
    • Available between 100Ω and 2MΩ dependent upon chip size (E-24 and E-96 values)
    • Temperature coefficient options of ±25ppm/°C and ±10ppm/°C
    • Tolerances of ±0.5% and  ±0.1% available
    • Operating temperature range between -55°C to +155°C
    • Maximum voltage rating of 300V and a power rating of up 0.5W (2010 chip size)
    More Info
  6. NRG non-magnetic metal thin film chip resistor series

    NRG non-magnetic metal thin film chip resistor series

    The NRG series from Susumu Co., Ltd offers high precision thin film chip resistors using non-magnetic materials making them ideal for medical electronics and equipment exposed to magnetic fields. The thin film structure enables low noise and anti-sulfur as well as the resistors having long term stability with inorganic passivation. Parts are available in 0603, 0805 and 1206 chip sizes with resistance values between 10Ω and 1MΩ depending on chip size, tolerance and TCR.

    • Produced from Non-magnetic materials.
    • Available between 10Ω and 1MΩ dependent upon chip size, tolerance and TCR (E-24 and E-96 values)
    • Temperature coefficients of ±50ppm/°C, ±25ppm/°C, ±10ppm/°C and ±5ppm/°C
    • Tolerances of ±0.5%, ±0.1% and ±0.05% available
    • Operating temperature range between -55°C to +155°C
    • Maximum voltage rating of 200V and a power rating of 250mW (1206 chip size)
    More Info
  7. PAT0510 series thin film attenuator 10GHz 32mW

    PAT0510 series thin film attenuator 10GHz 32mW

    Other attenuation values are available (see pdf file.) Parts are face down mounted for best RF performance. Parts are delivered loose, for small quantities, on tape strips or on reels of 10,000pcs.

    • 0402 chip size
    • Frequency Range of DC to 10GHz
    • Power rating: 32mW
    • Operating Temperature range: -55°C to +125°C
    More Info
  8. PAT1220 series thin film attenuator 10GHz 100mW

    PAT1220 series thin film attenuator 10GHz 100mW

    Other attenuation values are available (see pdf file.) Parts can be mounted upside down for best RF performance. Parts are delivered loose, for small quantities, on tape strips or on reels of 5000pcs.

    • 0dB - 10dB
    • DC - 10GHz
    • 100mW
    • 0805 size
    More Info
  9. PAT1632 Series 1206 Thin Film Attenuator

    PAT1632 Series 1206 Thin Film Attenuator

    The Susumu PAT1632 series of Thin Film attenuator is an electronic component that reduces the power of an RF signal without appreciably distorting its waveform  

    Manufactured using Susumu's Thin Film technology, these attenuators are constructed from a simple voltage divider network.

    These fixed attenuators are used to lower voltage, dissipate power, and to improve impedance matching.  In measuring signals attenuators are used to lower the amplitude of the signal a known amount to enable measurements, or to protect the measuring device from signal levels that might damage it.

    Attenuators are also used to 'match' impedance by lowering apparent SWR.

    •  0 - 16dB range available
    • DC to 3GHz
    • 1206 chip size
    • 125mW
    More Info
  10. PAT1632 series thin film attenuator engineering kit  - 1206 size -  600 pieces

    PAT1632 series thin film attenuator engineering kit - 1206 size - 600 pieces

    This kit allows the developer to access small quantities of chip attenuators for development purposes.

    • 0-16dB (12 attenuation values)
    • DC-10GHz
    • 125mW
    • 1206 size
    More Info
  11. PAT3042S series thin film attenuator 3GHz 250mW

    PAT3042S series thin film attenuator 3GHz 250mW

    Other attenuation values are available (see pdf file.) Parts can be mounted upside down for best RF performance. Parts are delivered loose, for small quantities, on tape strips or on reels of 2000pcs.

    • 0 - 20dB
    • DC - 3GHz
    • 250mW
    • 1712 Size
    More Info
  12. PAT3060P series thin film attenuator 10GHz 10W

    PAT3060P series thin film attenuator 10GHz 10W

    This high power thin film attenuator can operate at powers to 10W when mounted on a heatsink. Other attenuation values are available (see pdf file.)

    • 0 - 20dB
    • DC - 10GHz
    • 1.5W (10W max. on heatsink)
    • 5 stocked attenuation values
    • 50Ω impedance
    More Info
  13. PCS1632S series terminator 125mW 3GHz surface mount

    PCS1632S series terminator 125mW 3GHz surface mount

    Typical applications include dummy loads in base stations and RF test equipment. For best RF performance chips should be mounted face down.

    • DC-3GHz
    • 125mW
    • 50Ω and 75Ω versions
    • VSWR 1.1-1.2
    More Info
  14. PCS3040 series terminator 12.5W 2.1GHz heatsink mount

    PCS3040 series terminator 12.5W 2.1GHz heatsink mount

    Typical applications include dummy loads in base stations and RF test equipment.

    • DC ~ 2.1GHz
    • 12.5W (on H/S)
    • 50Ω impedance
    • VSWR 1.1 max.
    • Operating Temperature range: -55°C to +80°C
    More Info
  15. PCS3060 series terminator 30W 10GHz heatsink mount

    PCS3060 series terminator 30W 10GHz heatsink mount

    Typical applications include dummy loads in base stations and RF test equipment.

    • DC to 10GHz
    • 30W (on Heat Sink)
    • 50Ω impedance
    • VSWR 1.1 (DC~3GHz), 1.3 (3GHz~10GHz).
    • Operating temperature range: -55°C to +125°C
    More Info
  16. PCS3080 series terminator 80W 1.5GHz heatsink mount

    PCS3080 series terminator 80W 1.5GHz heatsink mount

    Typical applications include dummy loads in base stations and RF test equipment.

    • DC to 1.5 GHz
    • 80W max (on Heatsink)
    • 50Ω
    • VSWR 1.2 max.
    • Operating temperature: -55°C to +125°C
    More Info
  17. PRG high power thin film chip resistor series

    PRG high power thin film chip resistor series

    The PRG series from Susumu Co., Ltd offers precision thin film chip resistors with significantly higher power handling capability than conventional same size resistors thanks to the long sided terminals. Parts are available in 0804, 1206, 2008 and 2512 chip sizes with power ratings between 0.5W and 3W as well as resistance values between 2.5Ω and 250kΩ depending on chip size, tolerance and TCR.

    • Long sided terminals for higher power handling capability
    • Available between 2.5Ω and 250kΩ dependent upon chip size, tolerance and TCR (E-24 and E-96 values)
    • Temperature coefficient options of ±50ppm/°C and ±25ppm/°C
    • Tolerances of ±0.5% and  ±0.1% available
    • Operating temperature range between -55°C to +155°C
    • Maximum voltage rating of 400V and a power rating of up 3W (2512 chip size)
    More Info
  18. PXV1220S Series Thermo-Variable Attenuator.  DC~3GHz

    PXV1220S Series Thermo-Variable Attenuator. DC~3GHz

    The PXV1220 thin-film thermo-variable attenuator from Susumu provides an elegant solution to compensate for GaAs amplifier temperature drift, enabling the designer to discard the use of an automatic gain control (AGC) circuit on their PCB.

    • 2dB to 10dB attenuation.
    • DC - 3GHz.
    • 3 temperature coefficient options from stock.
    • 0805 chip size
    • 50 Ohm Impedance.
    • VSWR of 1.3max
    More Info
  19. RA1632 series 4-resistor array  (4 discrete resistors)

    RA1632 series 4-resistor array (4 discrete resistors)

    The RA series quad resistor arrays gives excellent performance in a small ( 1206 size ) package. The surface mount package allows for fewer parasitics an low noise performance. These resistors are ideal for high frequency applications.

    • 50Ω - 100KΩ element resistance range
    • Choice of 5ppm/°C and 10ppm/°C tracking TCR
    • ±0.1% ratio tolerance.
    • Choice of ±0.1% and ±0.5% absolute tolerance.
    • R1=R2=R3=R4 as standard.
    • Mixed resistance values available on request.
    • Supplied in 1000 piece tape and reel quantities.
    More Info
  20. Resistor development kit 0402   Tol: ±0.5% - 96,000 pieces

    Resistor development kit 0402 Tol: ±0.5% - 96,000 pieces

    The kit contains a large selection of RR0510 series SMD chip resistors. They are suitable for all soldering methods including: reflow and wave. All the resistors are individually marked with resistance value in Ohms.

    • 10Ω to 100KΩ
    • 0402 size
    • 96 different resistance values
    More Info

Items 1 to 20 of 57 total

per page
Page:
  1. 1
  2. 2
  3. 3

Set Descending Direction