Telephone +44 (0) 1342 330 470

Monday to Thursday: 08.30 to 17.00 (GMT)
Friday: 08.30 to 12.45 (GMT)

Search by Manufacturer

16 item(s) were found using the following search criteria

  • Manufacturer: Advanced Orientation Systems Inc

Don't see what you're looking for? Modify your search



16 Item(s)

per page

Set Descending Direction
  1. EZ-COMPASS-3A

    EZ-COMPASS-3A

    Tilt Compensated Compass with Dual Tilt System

    Low cost SOLID STATE advanced Pitch / Roll / Temperature compensated COMPASS / MAGNETOMETER system is built around a state of the art CMOS microcontroller utilizing AOSI's proprietary algorithm on a 1.5" x 2" assembled PCB with a total height including tilt sensing elements of less then 0.5". 

    The unit outputs continuous heading, magnetic field, dual axis tilt and temperature data over the standard RS-232 and RS-422 and  RS-485* interfaces.

    The AZIMUTH is generated from a 3 axis semiconductor magnetometer with 12 bit ( 0.08 deg ) resolution.

    The LINEAR tilt information is available with 12 bit resolution for +-90arcdeg in Pitch axis and FULL 360arcdeg in Roll axis.

    COMPASS/TILT module is perfectly suitable for numerous navigation, research, training, construction, entertainment and other precision orientation, navigation and leveling applications. 

    The COMPASS is able to output multi-sensor information in NMEA-0183 mode and responds to numerous generally used commands. Easy link through the Hyper Terminal Windows accessory facilitates custom calibration, hard iron compensation, data acquisition, data averaging, scan delay, dumping factor and data display.

    Compass is available with a logging option that allows users to autonomously store up to 20000 reading for future DSP processing,

    More Info
  2. EZ-COMPASS-3AL

    EZ-COMPASS-3AL

    Tilt Compensated Compass / Linear Dual Axis Tilt System

    Low cost VERTICAL SOLID STATE advanced Pitch / Roll / Temperature compensated COMPASS / MAGNETOMETER system is built around a state of the art CMOS microcontroller utilizing AOSI's proprietary algorithm on a 0.9"DIAM x 6" assembled PCB is designed to fit sub 1" tubular probes. 

    The LOGGING COMPASS permits users standalone data collection of up to 20000 data samples without use of any additional loggers of any other equipment. The user can pre-select required data and set the compass into the logging mode.

    Upon next power-up the logging compass after predetermined delay will initiate automatic data collection at accurate logging intervals. At the end of logging, data can be easily moved into a delimited text file for future analysis.

    Example: with 10 sec read intervals and 4 selected variables the compass will perform logging for about 11 hours. Logging compass is available as regular, vertical or horizontal configuration ( see photos above )

    The unit outputs continuous heading, magnetic field, dual axis tilt and temperature data over the standard RS-232 and RS-422 and  RS-485* interfaces. The AZIMUTH is generated from a 3 axis semiconductor magnetometer with 12 bit ( 0.08 deg ) resolution. The LINEAR tilt information is available with 12 bit resolution for over +-90arcdeg. COMPASS/TILT module is perfectly suitable for logging, bore hole profiling, antenna orientation, numerous navigation, research, training, construction, entertainment and other precision orientation, navigation and leveling applications. 

    The COMPASS is able to output multi-sensor information in NMEA-0183 mode and responds to numerous generally used commands. Easy link through the Hyper Terminal Windows accessory facilitates custom calibration, hard iron compensation, data acquisition, data averaging, scan delay, dumping factor and data display.

    More Info
  3. EZ-COMPASS-4

    EZ-COMPASS-4

    Tilt Compensated Compass

    Low cost SOLID STATE advanced Pitch / Roll / Temperature compensated miniature 3D COMPASS / MAGNETOMETER system is built around a state of the art CMOS microcontroller utilizing AOSI's proprietary algorithm on a 0.9" x 2" x 0.5" assembled PCB.  

    The unit outputs continuous heading, magnetic field, dual axis tilt and temperature data over the standard USB, RS-232TTL,RS-232 rider PCB, RS-422 and  RS-485* interfaces. The AZIMUTH is generated from a 3 axis semiconductor magnetometer with 12 bit ( 0.08 deg ) resolution. The LINEAR tilt information is available with 12 bit resolution for +-90arcdeg in Pitch and Roll axis  +-180 deg. COMPASS/TILT module is perfectly suitable for numerous navigation, antenna orientation, borehole profiling, research, training, construction, entertainment and other precision orientation,  and leveling applications. 

    The COMPASS is able to output multi-sensor information in NMEA-0183 mode and responds to numerous generally used commands. Easy link through the Hyper Terminal Windows accessory facilitates custom calibration, hard iron compensation, data acquisition, data averaging, scan delay, dumping factor and data display.

    More Info
  4. EZ-COMPASS-4-DIVE-M

    EZ-COMPASS-4-DIVE-M

    Submersible Miniature Compass

    High reliability submersible advanced pitch/roll compensated COMPASS / MAGNETOMETER system is built around a state of the art CMOS microcontroller utilizing AOSI's proprietary algorithm on a 0.9" x 2" assembled PCB with a total height including tilt sensing elements of less then an inch. 

    Packaged in a marine grade black anodized cylindrical aluminum housing the unit outputs continuous heading, field, dual axis tilt and temperature data over the standard RS-232 or RS-422 or RS-485 interface at depth up to 3500 meters. The AZIMUTH is generated from a 3 axis semiconductor magnetometer with 12 bit ( 0.08 deg ) resolution. The LINEAR tilt information is available with 12 bit resolution for up to +-180arcdeg in roll and +-90 deg in pitch.

    COMPASS/TILT module is perfectly suitable for numerous underwater navigation, research, training, construction, entertainment and other precision orientation, navigation and leveling applications. Bottom exterior surface is calibrated for accurate zero level 

    The COMPASS is able to output heading information in NMEA-0183 and local LCD modes. Easy link via Hyper Terminal Windows accessory facilitates custom calibration, hard/soft iron compensation, data acquisition, data averaging, and data display. EZ-COMPASS-4-DIVE-M is supplied with a mating connector molded to 4 feet cable. Custom cable length are available and are quoted upon request.

    More Info
  5. EZ-COMPASS-4-PROBE

    EZ-COMPASS-4-PROBE

    Temperature Compensated Horizontal Compass

    Low cost HORIZONTAL SOLID STATE advanced Pitch / Roll / Temperature compensated COMPASS / MAGNETOMETER system is built around a state of the art CMOS microcontroller utilizing AOSI's proprietary algorithm on a 0.9"DIAM x2" assembled PCB and sealed in a 1" diameter x 5" long tubular Aluminum non-magnetic enclosure with integrated bulkhead connector or water tight feed through. 

    The COMPASS PROBE outputs continuous heading, magnetic field, dual axis tilt and temperature data over the standard RS-232 and RS-422 and  RS-485* or USB interfaces.

    The AZIMUTH is generated from a 3 axis semiconductor magnetometer with 12 bit ( 0.08 deg ) resolution.

    The LINEAR tilt information is available with 12 bit resolution for 180 arcdeg.COMPASS/TILT probe is perfectly suitable for logging, bore hole profiling, antenna orientation, numerous navigation, research, training, construction, entertainment and other precision orientation, navigation and leveling applications. 

    The COMPASS PROBE is able to output multi-sensor information in NMEA-0183 mode and responds to numerous generally used commands.

    Easy link through the Hyper Terminal Windows accessory facilitates custom calibration, hard iron compensation, data acquisition, data averaging, scan delay, dumping factor and data display. Probe is supplied with a mating 6 foot cable, demo software and manual.

    More Info
  6. EZ-COMPASS-4V

    EZ-COMPASS-4V

    Tilt Compensated Compass (Vertical)

    Low cost SOLID STATE advanced Pitch / Roll / Temperature compensated COMPASS / MAGNETOMETER system is built around a state of the art CMOS microcontroller utilizing AOSI's proprietary algorithm on a 0.9" x 2" assembled PCB.  

    The unit outputs continuous heading, magnetic field, dual axis tilt and temperature data over the standard USB, RS-232TTL,RS-232 rider PCB, RS-422 and  RS-485* interfaces. The AZIMUTH is generated from a 3 axis semiconductor magnetometer with 12 bit ( 0.08 deg ) resolution. The LINEAR tilt information is available with 12 bit resolution for +-90arcdeg in both Pitch and Roll axis ( +-180 deg optional ). COMPASS/TILT module is perfectly suitable for numerous navigation, antenna orientation, borehole profiling, research, training, construction, entertainment and other precision orientation,  and leveling applications. 

    The COMPASS is able to output multi-sensor information in NMEA-0183 mode and responds to numerous generally used commands. Easy link through the Hyper Terminal Windows accessory facilitates custom calibration, hard iron compensation, data acquisition, data averaging, scan delay, dumping factor and data display.

    More Info
  7. EZ-COMPASS-4V-PROBE

    EZ-COMPASS-4V-PROBE

    Temperature Compensated Vertical Compass

    Low cost VERTICAL SOLID STATE advanced Pitch / Roll / Temperature compensated COMPASS / MAGNETOMETER system is built around a state of the art CMOS microcontroller utilizing AOSI's proprietary algorithm on a 0.9"DIAM x2" assembled PCB and sealed in a 1" diameter x5" long tubular enclosure with integrated bulkhead connector. 

    The COMPASS PROBE outputs continuous heading, magnetic field, dual axis tilt and temperature data over the standard RS-232 and RS-422 and  RS-485* or USB interfaces.

    The AZIMUTH is generated from a 3 axis semiconductor magnetometer with 12 bit ( 0.08 deg ) resolution.

    The LINEAR tilt information is available with 12 bit resolution for 180 arcdeg.

    COMPASS/TILT probe is perfectly suitable for logging, bore hole profiling, antenna orientation, numerous navigation, research, training, construction, entertainment and other precision orientation, navigation and leveling applications. 

    The COMPASS PROBE is able to output multi-sensor information in NMEA-0183 mode and responds to numerous generally used commands.

    Easy link through the Hyper Terminal Windows accessory facilitates custom calibration, hard iron compensation, data acquisition, data averaging, scan delay, dumping factor and data display.

    Probe is supplied with a mating 6 foot cable, demo software and manual.

    More Info
  8. EZ-LEVEL-PRO-W Dual Axis Inclinometer

    EZ-LEVEL-PRO-W Dual Axis Inclinometer

    EZ-LEVEL-PRO-W is an advanced wireless dual axis inclinometer system equipped with a rugged remote tilt sensing probe. It allows real time monitoring of PITCH and ROLL angles on any Android phone or tablet via built in standard Bluetooth wireless interface.  Menu driven system intuitively controls display functions while operator is located away from the actual tilting surface.

    EZ-LEVEL-PRO-W operates in full +-15 degrees of tilt in both Pitch and Roll with resolution and repeatability of 0.0010. The output can be easily switched between arcdeg and mm/meter with a single touch of a screen.

    EZ-LEVEL-PRO-W includes a rechargeable battery which can be recharged via standard Micro-USB port like any mobile phone.

    Designed to assist in heavy equipment installation and levelling, the EZ-LEVEL-PRO-W can be also used in QC inspection, CNC operations, construction, automotive, marine, military and many other applications. 

    More Info
  9. EZ-TILT-3000

    EZ-TILT-3000

    Analog Universal Inclinometer Platform

    EZ-TILT-3000TM rev-2 is a highly advanced and flexible angle conversion module for  single and dual axis tilt measurement applications.

    EZ-TILT-3000TM is able to provide a complete DUAL AXIS angle measurement solution with an ANALOG output when using DX sensors.  This miniature SMT module has independent gain and null adjustments, and is available in a WIDE RANGE or HIGH-RESOLUTION versions.

    RATIOMETRIC by design, it can be powered by a unipolar or bipolar supply. Advanced CMOS design guarantees low current consumption, which makes this module a logical choice for various battery-powered applications. 

    As with any other AOSI  angle conversion module, you may install the sensor directly on the PCB or remotely. With proper selection of supply voltage and GAIN settings this module may be directly interfaced to standard A/D converters or computer I/O data acquisition boards.

    More Info
  10. EZ-TILT-5000-rev3-NULL  / EZ-TILT-5000-rev3-C29

    EZ-TILT-5000-rev3-NULL / EZ-TILT-5000-rev3-C29

    Nulling Inclinometers

    EZ-TILT-5000-rev3 advanced programmable dual/single axis Digital output tilt module, is built around a customized state of the art CMOS Microprocessor. A 2"x 2" assembled PCB provides inclination information in two axis of tilt over USB, RS232, RS422 or RS485 interfaces. The module is fully temperature compensated for NULL and GAIN.

    The system includes full range linearity correction for each axis of tilt. The module uses any two sensor combination of either SX-003D-NULL, SX-003D-NULL-L or SX-C29 single axis inclination sensors and provides an economical and reliable tilt sensing solution for applications requiring superior Nulling capabilities with concurrent excellent LINEARITY, resolution, repeatability and symmetry.

    Rugged hermetic construction and MIL-SPEC temperature range make these sensors perfectly suitable for numerous high precision OEM, military, medical, optical, automotive, range finder, alignment, automation, robotics and construction angle measurement applications. Innovative design, four set screw holes and small size facilitate uncomplicated mounting.

    The system can be easily supplied with two different tilt sensors. This rare option lets users solve special applications when one axis requires high tilt range while the other one requires high resolution.

    Sensors could be remotely located and calibrated to different ranges if so required. The module is able to operate in a stand-alone mode with a 4 line x 20 character serial LCD display. The EZ-PLM NULLING module is provided on an Aluminum platform calibrated to the bottom surface. Any system can be installed into an UNDERWATER housing suitable for depth of 3500 meters and is designated as EZ-DIVE inclinometer. Standard DIVE unit is provided with a 4 feet cable with a mating suction connector.

    More Info
  11. EZ-TILT-5000-REV3-PLMs

    EZ-TILT-5000-REV3-PLMs

    DIGITAL Platform Leveling Systems

    USB PORT POWERED advanced programmable dual axis LINEAR Digital output tilt module, built around a customized state of the art CMOS Microprocessor. 

    The module is equipped with reference plate and full range linearity correction routine for each axis of tilt and can communicate via included USB, RS-232, RS-422 or RS-485 interfaces.

    System is perfectly suitable for numerous high precision OEM, military, medical, optical, automotive, range finder, alignment, automation, robotics and construction angle measurement or monitoring applications.  

    Exceptionally stable and consistent performance in temperature variable environments and it's LOW cost make EZ-TILT-5000-rev3-PLM the perfect choice for high accuracy leveling applications.

    More Info
  12. EZ-TILT-5000-REV3-SS

    EZ-TILT-5000-REV3-SS

    DIGITAL Linear Dual Axis Tilt System

    USB PORT POWERED advanced programmable dual axis LINEAR Digital output tilt module, built around a customized state of the art CMOS Microprocessor. 

    The module is equipped with full range linearity correction routine for each axis of tilt and can communicate via included USB, RS-232, RS-422 or RS-485 interfaces.

    System is perfectly suitable for numerous high precision OEM, military, medical, optical, automotive, range finder, alignment, automation, robotics and construction angle measurement or monitoring applications.  

    Exceptionally stable and consistent performance in temperature variable environments and it's LOW cost make EZ-TILT-5000-rev3-SS the perfect choice for high accuracy leveling applications.

    More Info
  13. EZ-TILT-6000-REV2-10LIN

    EZ-TILT-6000-REV2-10LIN

    DIGITAL Linear Dual Axis Tilt System

    USB PORT POWERED advanced programmable dual axis LINEAR Digital output tilt module, built around a customized state of the art CMOS Microprocessor.

    The module also operates from a 5Vdc regulated supply and is equipped with full range linearity correction routine for each axis of tilt and can communicate via included USB, RS-232, RS-422 or RS-485 interfaces.

    System is perfectly suitable for numerous high precision OEM, military, medical, optical, automotive, range finder, alignment, automation, robotics and construction angle measurement or monitoring applications.

    Exceptionally stable and consistent performance in temperature variable environments and it's low cost make EZ-TILT-6000-rev2-10 the perfect choice for high accuracy leveling applications.

    More Info
  14. EZ-TILT-7001 / EZ-TILT-7002 Solid State PCB

    EZ-TILT-7001 / EZ-TILT-7002 Solid State PCB

    MICRO-MACHINED INCLINOMETERS 

    High performance micro-machined solid state single/dual axis inclinometers deliver excellent reliability over wide temperature range.

    Based on the principle of differential capacitance, the unit detects and converts tilt changes into proportional analog voltage.

    Main sensor is packaged into a ultra-small DFN SMT package.

    Easy installation and rugged design makes it suitable for numerous high  precision applications with tilt range of +-90 arcdeg.  

    Sensor is assembled on a 0.5" x 1.5" PCB which is operational from  5Vdc or 6-18Vdc.    

    More Info
  15. EZ-TILT-7001-D / EZ-TILT-7002-D Solid State Disc

    EZ-TILT-7001-D / EZ-TILT-7002-D Solid State Disc

    This special all Solid State Analog Vdc output environmental inclinometers are built around a customized state of the art CMOS components.

    In a single (7001) and dual axis (7002)  versions it provides an economical and reliable tilt sensing solution for applications requiring superior Mid-Wide range LINEARITY, resolution, repeatability and symmetry.

    Rugged all weather construction make it perfectly suitable for numerous Mid-Wide range high precision OEM, military, medical, optical, automotive, range finder, alignment, automation, robotics and construction angle measurement applications. Innovative design and small size facilitate uncomplicated wall mounting.   

    Sealed uni-body construction facilitates long term reliable performance independent of environmental conditions, and does not require additional enclosures.

    More Info
  16. SX-005D-VIB Vibration Resistant Linear Tilt Sensor

    SX-005D-VIB Vibration Resistant Linear Tilt Sensor

    The SX-005D-VIB is single axis LINEAR ceramics tilt sensor that provides economical and reliable single axis tilt solutions for HIGH VIBRATION applications where very good linearity, high resolution and superior symmetry are required.

    Constructed with a specially developed internal cavity helps restrict the movement and foaming of electrolyte during severe vibrations.

    Rugged construction and use of Advanced engineering ceramics allow use without additional housings or bulky enclosures.,

    MIL-SPEC wide temperature range and excellent filtering ability during vibration make these sensors suitable for numerous construction, military, automotive, industrial, laser, medical, heavy machinery and robotics applications.

    Low profile and vertical flat reference surface facilitate simple utilization.

    More Info

16 Item(s)

per page

Set Descending Direction