Black

  • Power Control
  • Test and Measurement
  • Inline, normally-open flow switches
  • WRAS Approved up to 60°C
  • Operating pressure up to 10 bar
  • Made of acetal resin (refer to chemical compatibility chart in Technical Library)
  • Can be mounted horizontally or vertically (upward flow)
  • UL
  • Cynergy3
  • Power Control
  • Test and Measurement
  • Inline, normally-open flow switches
  • WRAS Approved up to 60°C
  • Operating pressure up to 10 bar
  • Made of acetal resin (refer to chemical compatibility chart in Technical Library)
  • Can be mounted horizontally or vertically (upward flow)
  • UL
  • Cynergy3
  • Oil & Gas
  • Cable end float switches
  • UL, VDE and CENELEC approved microswitch
  • High density polyethylene (HDPE) casing filled with polyurethane
  • 5m cable supplied – PVC (standard) or PUR (for use in fuel oils)
  • Direct power switching
  • Suitable for depths up to 100m
  • UL
  • Cynergy3
  • Test and Measurement
  • Nylon Compact Internal Fitting Float Switch Series
  • Compact design for size sensitive applications
  • WRAS approved
  • UL
  • Cynergy3
  • Test and Measurement
  • Nylon Compact Internal Fitting Float Switch Series
  • Compact design for size sensitive applications
  • Supplied with 100cm PVC 16/0.2 leadouts
  • WRAS approved
  • UL
  • Cynergy3
  • Test and Measurement
  • Nylon Compact External Fitting Float Switch Series
  • Compact design for size sensitive applications
  • WRAS approved
  • UL
  • Cynergy3
  • PCB terminal connector with female plug
  • Rated current for minimum number of poles 6A (IEC) and 5A (UL)
  • Dimensions of L1 2.5mm to 27.5mm (depending on the number of poles required)
  • Push in spring connection with integrated push buttons for opening the terminal point
  • Wire connection cross section from AWG28 (0.08mm²) to AWG 20 (0.5mm²)
  • Temperature range −40°C up to +105°C
  • CSA and UL 1059 approved, IEC listed
  • UL
  • Weidmüller
  • Compliant
  • High power female plug in connector
  • Rated current for minimum number of poles 78.3A (IEC) and 60A (UL)
  • Dimensions of L1 10.16mm to 81.28mm (depending on the number of poles required)
  • Clamping range from 0.2mm² to 16mm²
  • Wire connection cross section from AWG 22 to AWG 6
  • Temperature range −50°C up to +130°C
  • CSA and UL 1059 approved, IEC listed
  • UL
  • Weidmüller
  • Compliant
  • High power female plug in connector
  • Rated current for minimum number of poles 57A (IEC) and 39A (UL)
  • Dimensions of L1 7.62mm to 45.62mm (depending on the number of poles required)
  • Clamping range from 0.5mm² to 10mm²
  • Wire connection cross section from AWG 24 to AWG 8
  • Temperature range −50°C up to +125°C
  • CSA and UL 1059 approved, IEC listed
  • UL
  • Weidmüller
  • Compliant
  • PCB terminal connector
  • Rated current for minimum number of poles 41A (IEC) and 35A (UL)
  • Dimensions of L1 7.5mm to 82.5mm (depending on the number of poles required)
  • THT solder connection with a solder pin length of 5mm
  • Wire connection cross section from AWG 24 to AWG 8
  • Temperature range of −40°C to +120°C
  • CSA and UL 1059 approved, IEC listed
  • UL
  • Weidmüller
  • Compliant
  • PCB terminal connector
  • Rated current for minimum number of poles 41A (IEC) and 37A (UL)
  • Dimensions of L1 7.5mm to 82.5mm (depending on the number of poles required)
  • THT solder connection with a solder pin length of 5mm
  • Wire connection cross section from AWG 24 to AWG 8
  • Temperature range of −40°C to +120°C
  • CSA and UL 1059 approved, IEC listed
  • UL
  • Weidmüller
  • Compliant
  • PCB terminal connector
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Dimensions of L1 3.5mm to 38.5mm (depending on the number of poles required)
  • SMD solder connection
  • Wire connection cross section from AWG 28 to AWG 14
  • Temperature range of −50°C to +120°C
  • CSA and UL 1059 approved, IEC listed
  • UL
  • Weidmüller
  • Compliant
  • PCB terminal connector
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Dimensions of L1 3.5mm to 38.5mm (depending on the number of poles required)
  • SMD solder connection
  • Wire connection cross section from AWG 28 to AWG 14
  • Temperature range of −50°C to +120°C
  • CSA and UL 1059 approved, IEC listed
  • UL
  • Weidmüller
  • Compliant
  • PCB terminal connector
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Dimensions of L1 5mm to 35mm (depending on the number of poles required)
  • SMD solder connection
  • Wire connection cross section from AWG 28 to AWG 14
  • Temperature range of −50°C to +120°C
  • CSA and UL 1059 approved, IEC listed
  • UL
  • Weidmüller
  • Compliant
  • PCB terminal connector
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Dimensions of L1 5mm to 35mm (depending on the number of poles required)
  • SMD solder connection
  • Wire connection cross section from AWG 28 to AWG 14
  • Temperature range of −50°C to +120°C
  • CSA and UL 1059 approved, IEC listed
  • UL
  • Weidmüller
  • Compliant
  • PCB terminal connector
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Dimensions of L1 7.5mm to 37.5mm (depending on the number of poles required)
  • SMD solder connection
  • Wire connection cross section from AWG 28 to AWG 14
  • Temperature range of −50°C to +120°C
  • CSA and UL 1059 approved, IEC listed
  • UL
  • Weidmüller
  • Compliant

Manufacturers

Looking for Black?

The below manufacturers are all of our authorised partners that produce Black or related products.
  • Alpha Electronics
  • Ametherm
  • Caddock
  • Cissoid
  • Core Sensors
  • Coto Technology
  • Cynergy3
  • DGH
  • Paine
  • Exxelia Ohmcraft
  • General Resistance
  • InterFET
  • Isabellenhütte
  • Jackcon
  • Merit Sensor
  • Newtek Sensor Solutions
  • NVE
  • Powertron
  • RARA
  • RdF
  • Rhopoint Instruments
  • Riedon
  • SRT Microcéramique
  • SRT Resistor Technology
  • Stellar Technology
  • Susumu
  • Vishay Foil Resistors
  • Weidmüller

Black