Shunts

Shunts
Show:
Sort By:

Alpha FNP Series

The FNP high power precision shunt resistor series from Alpha Electronics offers a range of very high precision current sensing shunts with a maximum power rating of 500W on a suitable heat sink at +25°C. By utilising a Ni-Cr Bulk Metal® foil resistor technology, they are able to produce resistors with low temperature coefficients. The FNP shunt resistor series has a built in Pt100 sensor for monitoring the temperature of the resistive element...

£0.00 Ex Tax: £0.00

Alpha PSB Series

The PSB ultra-precision power shunt resistor series from Alpha Electronics offers 4-terminal (Kelvin) connections for current sensing and a power rating of up to 40W on a heat sink or 12W in free air (at +25°C) all with a low ohmic resistance range from 0.001Ω to 1Ω. By utilising Alpha's Bulk Metal® foil resistor technology, they are able to offer excellent temperature characteristics with low temperature coefficients down to ±5 ppm/°C between ..

£0.00 Ex Tax: £0.00

Isabellenhütte BAC Series

The BAC precision resistor series from Isabellenhütte includes a PCB with connector for voltage sensing, designed for battery management systems or welding equipment with a low resistance value of 0.0001Ω. The BAC series from Isabellenhütte is available with tinned or untinned terminals, continuous load up to 320A (0.0001Ω) within a chip size of 8420.2-terminal shunt resistorMaximum fastening torque of 10NmShunt available wi..

£0.00 Ex Tax: £0.00

Isabellenhütte BAS Series

The BAS precision resistor series from Isabellenhütte, designed for battery management systems or welding equipment with a low resistance values from 0.000035Ω to 0.0005Ω. The BAS series from Isabellenhütte is available with tinned or untinned terminals, continuous load up to 350A (100µΩ) within a chip size of 8420.2-terminal shunt resistorMaximum fastening torque 10NmShunt available with tinned or untinned terminalsPe..

£0.00 Ex Tax: £0.00

Isabellenhütte BKW Series

The BKW 4-terminal precision resistor series from Isabellenhütte, designed for energy meters with resistance values from 0.0003Ω to 0.0005Ω. The BKW series from Isabellenhütte has extremely good long-term stability, thus the energy meters do not require any recalibration, very high reproducibility of R-value and TCR.4-terminal precision resistor, independent from temperature because of lowest TCR-valuesMassive copper terminals..

£0.00 Ex Tax: £0.00

Isabellenhütte BVD Series

The BVD 2-terminal precision resistor series from Isabellenhütte are designed for energy metering and battery charging, with a resistance value of 0.0005Ω (further values available on request). The BVD series from Isabellenhütte is available with heavy cooper connectors, continuous current load up to 75A.2-terminal precision resistorHeavy copper connectorsContinuous current load of up to 75AResistance value of 500µΩ (F..

£0.00 Ex Tax: £0.00

Isabellenhütte BVM-F Series

The BVM-F precision resistor series from Isabellenhütte are designed for high current applications such as kWh meters and battery chargers, with a resistance value range from 0.0001Ω to 0.0005Ω. The BVM-F series from Isabellenhütte has a three different power connections threaded bolts, bolt down holes and solid terminals which has a continuous current load up to 200A (0.0001Ω).2-Terminal precision resistor3 different power connec..

£0.00 Ex Tax: £0.00

Isabellenhütte KVM Series

The KVM precision resistor series from Isabellenhütte are designed for battery management systems and battery chargers, with a resistance value of 0.0001Ω. The KVM series from Isabellenhütte has heavy copper connections with a continuous current load up to 250A.2-Terminal precision resistor for battery management systems and battery chargersHeavy copper connectionsContinuous current load up to 250AResistance values of ..

£0.00 Ex Tax: £0.00

Isabellenhütte RUG-Z Series

The RUG-Z high precision shunt resistor series from Isabellenhütte offers 4-terminal connection technology of very high precision current sensing shunts with a maximum power rating of 250W on a suitable heat sink. Designed for measuring high currents with very high accuracy in power supplies such as those for superconducting magnets. The RUG-Z series from Isabellenhütte has a single pulse power load of 50J (tp ..

£0.00 Ex Tax: £0.00

Riedon RSA Series

The RSA series of precision current shunts from Riedon have been especially designed for DC ammeters and similar instruments. These base-mounted shunts offer current ratings from 5A up to 150A with outputs of 0.05V, 0.1V or custom options available. They utilise a Manganin® resistive element and have a standard tolerance of ±0.25% with ±0.1% parts available on request. The very low resistance values required for the shunt resistors, which range..

£0.00 Ex Tax: £0.00

Riedon RSB Series

The RSB series of precision current shunts from Riedon have been especially designed for DC ammeters and similar instruments. These base-mounted shunts offer current ratings from 170A up to 600A with outputs of 0.05V, 0.1V or custom options available. They utilise a Manganin® resistive element and have a standard tolerance of ±0.25% with ±0.1% parts available on request. The very low resistance values required for the shunt resistors, which ran..

£0.00 Ex Tax: £0.00

Riedon RSC Series

The RSC series of precision current shunts from Riedon have been especially designed for DC ammeters and similar instruments. These base-mounted shunts offer current ratings of 800A, 1000A and 1200A with outputs of 0.05V, 0.1V or custom options available. They utilise a Manganin® resistive element and have a standard tolerance of ±0.25% with ±0.1% parts available on request. The very low resistance values required for the shunt resistors, which..

£0.00 Ex Tax: £0.00

Riedon RSN Series

The RSN series of base-mounted DC Ammeter/Busbar shunts from Riedon offers current ratings from 1A up to 500A with outputs of 0.05V, 0.1V or custom options available. They utilise a Manganin® resistive element to achieve low resistance values ranging from 100µΩ at 500A to 0.05Ω at 1A (for 50mV Output) and have a standard tolerance of ±0.1%.Base mounted shuntManganin® resistive element0.05V output available in select resista..

£0.00 Ex Tax: £0.00