Vishay Foil Resistors FRSM 303262 Series (EEE 'space qualified')

Vishay Foil Resistors FRSM 303262 Series (EEE 'space qualified')

This FRSM ultra high precision resistor series from Vishay Foil Resistors is tested to EEE-INST-002 and MIL-PRF-55342, specifically for space and military applications. The 303262 series offers a resistance range between 10Ω and 5kΩ, in a small 0805 surface-mount package with wrap-around terminations. These resistors utilise Vishay Foil Resistor's newest Z-1 Bulk Metal® foil resistor technology for improved load life stability (up to 25ppm) and higher working temperatures (balanced temperature characteristics over a range from -55°C to +150°C). They have nominal temperature coefficients of resistance of ±0.2ppm/°C typical between -55°C to +125°C (+25°C reference) with tolerances available down to ±0.01% between 250Ω and 5kΩ.

  • Ultra high precision wrap-around bulk foil chip resistor
  • EEE-INST-002 and MIL-PRF-55342 tested for space and military applications
  • Available in any resistance between 10Ω and 5kΩ
  • 0805 package
  • Tolerances as low as ±0.01% over the resistance range of 250Ω up to 5kΩ
  • Power coefficient "ΔR due to self heating" of 5ppm at rated power
  • TCR as low as ±0.2ppm/°C between -55° and +125°C, +25°C ref.
  • Voltage rating 22V
  • Power rating of 0.1W at +70°C
  • Load life stability of ±0.02% after 2000h at 70°C at rated power
  • Thermal stabilization time <1s (nominal value achieved within 10ppm of steady state value)
  • Electrostatic discharge (EDS) of at least to 25kV
  • Short time overload of ≤0.005% typical
  • Rise time as low as 1ns, effectively no ringing
  • Current noise of <0.010µVRMS/V of applied voltage (<-40dB)
  • Non-hot spot design
  • Terminal finishes available: tin/lead alloy

Non-standard technical requirements such as resistance outside of standard range, higher temperature application up to 240°C or better performance characteristics are available upon request. Please contact us for further information and availability.

The below table gives full specifications for each resistor model available including the 303262 series:

FRSM Z-1 resistors` Specifications
Specifications
Additional Features
  • Ultra high precision FRSM wrap-around chip resistor
  • EEE-INST-002 and MIL-PRF-55342 tested for space and military applications
  • 0805 package size
  • Voltage rating of 22V
  • Excellent stability, noise and ESD withstanding properties
  • Non-inductive: 0.08µH
  • Tin/lead alloy terminations
Maximum Power Rating
  • 0.1W (at +70°C)
Maximum Resistance
  • 5kΩ
Minimum Resistance
  • 10Ω
TCR
  • ±0.2ppm/°C typical (-55°C to +125°C, +25°C ref.)
  • ±3.0ppm/°C maximum TCR between 100Ω up to 5kΩ
  • ±4.0ppm/°C maximum TCR between 50Ω up to 100Ω
  • ±5.0ppm/°C maximum TCR between 10Ω up to 50Ω
Tolerance10Ω up to 25Ω
  • ±0.50% (D)
  • ±1.00% (F)
25Ω up to 50Ω
  • ±0.25% (C)
  • ±0.50% (D)
  • ±1.00% (F)
50Ω up to 100Ω
  • ±0.10% (B)
  • ±0.25% (C)
  • ±0.50% (D)
  • ±1.00% (F)
100Ω up to 250Ω
  • ±0.05% (A)
  • ±0.10% (B)
  • ±0.25% (C)
  • ±0.50% (D)
  • ±1.00% (F)
250Ω up to 5kΩ
  • ±0.01% (T)
  • ±0.02% (Q)
  • ±0.05% (A)
  • ±0.10% (B)
  • ±0.25% (C)
  • ±0.50% (D)
  • ±1.00% (F)

We are pleased to provide you with a range of additional content including videos, product datasheets, case studies, white papers and application notes for your reference. Please see below for the latest content available:

 

 

DOCUMENTATION
PDF DocumentVishay Foil Resistors FRSM EEE space qualified ultra high precision resistor series datasheet
PDF DocumentVishay Foil Resistors design and selector guide for high precision resistors
PDF DocumentVishay Foil Resistors Bulk Metal® foil high-precision resistors product overview
PDF DocumentVishay Foil Resistors qualified high-precision resistors for Avionics, Military and Space
PDF DocumentVPG Foil Resistors

 

 

VIDEOS
Bulk Metal® Foil Resistors

Bulk Metal® Foil resistors, developed by Dr. Felix Zandman in 1962, are the gold standard for the electronic industry. With essentially zero TCR, zero PCR and extremely robust construction, they are the logical choice for all applications requiring unquestioned reliability and stability.
Resistor Stability Put to the Test (Demo Video)

In this video, host Richard Zuratt from VPG puts the stability of the three major resistor technologies — foil, thin, and thick film — to the test. Each resistor type is subjected to an overload pulse and its change in resistance value is recorded. Due to the homogeneous nature of the VPG Bulk Metal® Foil resistor, it is the only of the three to experience no change from the high power pulse. This demonstrated performance makes foil resistors the technology of choice for critical applications where long-term stability and survivability are paramount.
A head to head comparison of the survival rates of precision thin film nichrome (NiCr) resistors versus VFR Bulk Metal Foil resistors in a high humidity environment.

All resistors that are based on nichrome, which is a category that includes both thin film devices and Bulk Metal Foil resistors, are susceptible to electro-chemical corrosion or etching when placed in a high humidity environment and powered with a very low wattage. But since the nichrome element of a Bulk Metal Foil resistor is hundreds of times thicker than the element in a thin film device with the same value, it will last much longer under these conditions. This video shows the actual etching process and survival times for thin film and foil nichrome resistive elements as they are tested in 100% humidity conditions.
VIDEOS
Bulk Metal® Foil Resistors

Bulk Metal® Foil resistors, developed by Dr. Felix Zandman in 1962, are the gold standard for the electronic industry. With essentially zero TCR, zero PCR and extremely robust construction, they are the logical choice for all applications requiring unquestioned reliability and stability.
Resistor Stability Put to the Test (Demo Video)

In this video, host Richard Zuratt from VPG puts the stability of the three major resistor technologies — foil, thin, and thick film — to the test. Each resistor type is subjected to an overload pulse and its change in resistance value is recorded. Due to the homogeneous nature of the VPG Bulk Metal® Foil resistor, it is the only of the three to experience no change from the high power pulse. This demonstrated performance makes foil resistors the technology of choice for critical applications where long-term stability and survivability are paramount.
A head to head comparison of the survival rates of precision thin film nichrome (NiCr) resistors versus VFR Bulk Metal Foil resistors in a high humidity environment.

All resistors that are based on nichrome, which is a category that includes both thin film devices and Bulk Metal Foil resistors, are susceptible to electro-chemical corrosion or etching when placed in a high humidity environment and powered with a very low wattage. But since the nichrome element of a Bulk Metal Foil resistor is hundreds of times thicker than the element in a thin film device with the same value, it will last much longer under these conditions. This video shows the actual etching process and survival times for thin film and foil nichrome resistive elements as they are tested in 100% humidity conditions.

This product is not compliant to the RoHS EU directive 2011/65/EU.

  • Views: 405
  • Product Code: Vishay Foil Resistors FRSM 303262 Series
  • SKU: Vishay Foil Resistors FRSM 303262 Series
  • Availability: In Stock
0 Product(s) Sold
  • £0.00
  • Ex Tax: £0.00

Available Options

Tags: space approved, Vishay EEE, VPG EEE, FRSM EEE, Vishay FRSM, FRSM, FRSM Z1, FRSM-Z1, FRSM0805, FRSM 0805, FRSM-0805, VPG FRSM EEE, Vishay 303262, VPG 303262, FRSM-303262, FRSM 303262, 303262