Telephone +44 (0) 1342 330 470

Monday to Thursday: 08.30 to 17.00 (GMT)
Friday: 08.30 to 12.45 (GMT)

PRODUCT SEARCH
Portal

Attenuators



7 Item(s)

per page

Set Descending Direction
  1. PAT0510 series thin film attenuator 10GHz 32mW

    PAT0510 series thin film attenuator 10GHz 32mW

    Other attenuation values are available (see pdf file.) Parts are face down mounted for best RF performance. Parts are delivered loose, for small quantities, on tape strips or on reels of 10,000pcs.

    • 0402 chip size
    • Frequency Range of DC to 10GHz
    • Power rating: 32mW
    • Operating Temperature range: -55°C to +125°C
    More Info
  2. PAT1220 series thin film attenuator 10GHz 100mW

    PAT1220 series thin film attenuator 10GHz 100mW

    Other attenuation values are available (see pdf file.) Parts can be mounted upside down for best RF performance. Parts are delivered loose, for small quantities, on tape strips or on reels of 5000pcs.

    • 0dB - 10dB
    • DC - 10GHz
    • 100mW
    • 0805 size
    More Info
  3. PAT1632 Series 1206 Thin Film Attenuator

    PAT1632 Series 1206 Thin Film Attenuator

    The Susumu PAT1632 series of Thin Film attenuator is an electronic component that reduces the power of an RF signal without appreciably distorting its waveform  

    Manufactured using Susumu's Thin Film technology, these attenuators are constructed from a simple voltage divider network.

    These fixed attenuators are used to lower voltage, dissipate power, and to improve impedance matching.  In measuring signals attenuators are used to lower the amplitude of the signal a known amount to enable measurements, or to protect the measuring device from signal levels that might damage it.

    Attenuators are also used to 'match' impedance by lowering apparent SWR.

    •  0 - 16dB range available
    • DC to 3GHz
    • 1206 chip size
    • 125mW
    More Info
  4. PAT1632 series thin film attenuator engineering kit  - 1206 size -  600 pieces

    PAT1632 series thin film attenuator engineering kit - 1206 size - 600 pieces

    This kit allows the developer to access small quantities of chip attenuators for development purposes.

    • 0-16dB (12 attenuation values)
    • DC-10GHz
    • 125mW
    • 1206 size
    More Info
  5. PAT3042S series thin film attenuator 3GHz 250mW

    PAT3042S series thin film attenuator 3GHz 250mW

    Other attenuation values are available (see pdf file.) Parts can be mounted upside down for best RF performance. Parts are delivered loose, for small quantities, on tape strips or on reels of 2000pcs.

    • 0 - 20dB
    • DC - 3GHz
    • 250mW
    • 1712 Size
    More Info
  6. PAT3060P series thin film attenuator 10GHz 10W

    PAT3060P series thin film attenuator 10GHz 10W

    This high power thin film attenuator can operate at powers to 10W when mounted on a heatsink. Other attenuation values are available (see pdf file.)

    • 0 - 20dB
    • DC - 10GHz
    • 1.5W (10W max. on heatsink)
    • 5 stocked attenuation values
    • 50Ω impedance
    More Info
  7. PXV1220S Series Thermo-Variable Attenuator.  DC~3GHz

    PXV1220S Series Thermo-Variable Attenuator. DC~3GHz

    The PXV1220 thin-film thermo-variable attenuator from Susumu provides an elegant solution to compensate for GaAs amplifier temperature drift, enabling the designer to discard the use of an automatic gain control (AGC) circuit on their PCB.

    • 2dB to 10dB attenuation.
    • DC - 3GHz.
    • 3 temperature coefficient options from stock.
    • 0805 chip size
    • 50 Ohm Impedance.
    • VSWR of 1.3max
    More Info

7 Item(s)

per page

Set Descending Direction