Coto CT10 Series

Coto CT10 Series
The CT10 moulded dry reed switch series from Coto. It is single-pole, single throw (SPST) type, having normally open ruthenium contacts. The total operating range of 10AT to 40AT with a release range of 3AT to 35AT and a switched power of 10W (max). The CT10 series  is a double-ended type and may be actuated with an electromagnet, a permanent magnet or a combination of both. The device is designed with rugged encapsulation, excellent life and reliability, SMD mounting and is available in Axial or Gull Wing configurations. The CT10 series are ideally suited to the needs of proximity sensing, security alarm sensor, level sensor, flow sensor and pulse counter.
  • Moulded dry reed switch
  • Total operating range 10AT to 40AT
  • Switched power 10W (max)
  • Release range 3AT to 35AT
  • Switched voltage DC 200V (max) and AC RMS value 140V (max)
  • Switched current DC 500mA (max) and AC RMS value 500mA (max)
  • Ideal for SMD pick and place
  • Operating temperature −40°C; to +125°C
  • Available in axial or gull wing configurations
  • Tape and reel packaging

Typical Applications include:

  • Proximity sensing
  • Security alarm sensor
  • Level sensor
  • Flow sensor
  • Pulse Counter

The below table gives the full specifications of the Coto CT10 magnetic sensor series:

Coto CT10 Specifications
Specifications
Additional Features
  • Surface mount moulded switch
  • Carry Current DC 0.5A (max)
  • Ideal for SMD pick and place
  • Rugged encapsulation
  • Available in gull wing and axial configurations
  • Tape and reel packaging available
  • Operating temperature −40°C to +125°C
Maximum Power Rating
  • 10W (Switching)
Maximum Voltage Rating
  • DC 200V (Maximum)
  • AC RMS value 140V (Maximum)
Operating Current
  • DC 500mA (Maximum)
  • AC RMS value 500mA (Maximum)
Operating Range
  • 10AT to 40AT
Release Range
  • 3AT to 35AT

We are pleased to provide you with a range of additional content including videos, product datasheets, case studies, white papers and application notes for your reference. Please see below for the latest content available:

 

 

DOCUMENTATION
PDF DocumentCoto CT10 reed switch series datasheet
PDF DocumentCoto Technology sensors and switches product sheet
PDF DocumentCoto RedRock™ TMR magnetic sensor product catalogue
PDF DocumentCoto Technology reed relay and reed switch selector charts
PDF DocumentCotoMOS® MOSFET relay selector chart
White Papers
PDF DocumentTesting reed relays and reed switches for reliability white paper
PDF DocumentLife expectancy for reed relays in high temperature environments white paper
Application Notes - TMR Sensors
PDF DocumentThe importance of magnet protection within harsh environments application note
PDF DocumentInterfacing the Coto Technology RedRock™ RR110 to an ADC using a low power analog interface circuit application note
PDF DocumentReady for take-off using the RedRock™ RR130 in wildlife tracking devices application note
PDF DocumentSize matters in capsule endoscopy application note
PDF DocumentThe evolution of magnetic sensing technology: from hall effect to tunneling magnetoresistance (TMR) application note
PDF DocumentUsing RedRock™ TMR magnetic sesnors RR121 for speed and direction estimation in rotating systems application note
PDF DocumentImproving a simple 3-wire level sensor assembly by using the RedRock™ RR131 TMR digital switch application note
PDF DocumentModernising security systems with TMR for higher reliability, wider sensing range and long battery life application note
PDF DocumentHow to replace a 2-wire reed switch with a 3-wire sensor application note
Application Notes - CotoMOS® MOSFETs
PDF DocumentCotoMOS® technical and applications information application note
PDF DocumentApplications of small signal relays in photovoltaic inverters application note
PDF DocumentIncreasing the ampacity of the CotoMOS® CS128 opto-isolated SSR by parallel operation application note
PDF DocumentOutput muting in headphone amlifiers and portable speakers with negligible hermonic distortion using CotoMOS® relays application note
PDF DocumentDual-rail battery switching using CotoMOS® relays in portable headphone amplifiers and portable powered speakers application note
PDF DocumentRR110 ultra low power 'wake up' application note
PDF DocumentHow to increase your current capacity of 6-pin CotoMOS® solid state MOSFET relays by up to 100% application note
Application Notes - Classic Reed Relays
PDF DocumentReed relays technical and application information application note
PDF DocumentApplications of small signal relays in photovoltaic inverters application note
PDF DocumentIf it ain't broke fix it application note
PDF DocumentLeadform follows function in RF reed relay design application note
PDF DocumentThe heat is on when you test at 125°C (2970 Series) application note
PDF DocumentOptimising cable tester switching architecture using the Coto Technology 9104-0022 high voltage reed relay application note
PDF DocumentBest practices for applying Coto Technology's 9852 Form C reed relay application note
PDF DocumentCoto Technology's 9814 reed relay application note
Application Notes - Classic Reed Switches
PDF DocumentReed switches technical and applications information application note
PDF DocumentReliable reed switching best practices for normally closed applications application note
PDF DocumentNobody said designing utility meters was easy application note
PDF DocumentRules of attraction for reliable reed switch-magnet applications application note
PDF DocumentLiquid level sensing using reed switch technology application note
PDF DocumentLiquid level sensing using reed switch technology application note (detailed)
PDF DocumentThe importance of magnet protection within harsh environments application note
PDF DocumentReed switch life characteristics under different levels of capacitive loading application note
PDF DocumentCoto DYAD switch contact style application note
PDF DocumentCT10-G4's rugged lead-frame design is a feature and a benefit application note

 

 

 

VIDEOS
Coto Technology Gen 2.0 TMR sensors demo board overview

Coto Technology Applications Engineer, Tony Parakka, provides a peek at Coto’s newest 2.0 Generation demo board featuring RedRock™ TMR magnetic sensor products: RR111 (Analog Output); RR120 (Digital Unipolar Sensor); RR121 (Bipolar Digital Latching) and RR121 (Digital Omnipolar). This video serves as a basic overview of the different products.
VIDEOS
Engineering Discussion: TMR analog output sensor RR111

Coto Technology Applications Engineer, Tony Parakka, provides a peek at Coto’s newest 2.0 Generation demo board featuring RedRock™ TMR magnetic sensor products: RR111 (Analog Output); RR120 (Digital Unipolar Sensor); RR121 (Bipolar Digital Latching) and RR121 (Digital Omnipolar). This video serves as a basic overview of the different products.

This product is available fully compliant to the RoHS EU directive 2011/65/EU.

  • Views: 290
  • Product Code: Coto CT10 Series
  • SKU: Coto CT10 Series
  • Availability: In Stock
0 Product(s) Sold
  • £0.00
  • Ex Tax: £0.00

Available Options

Tags: CT10-1020-A2, CT10-1030-A2, CT10-1040-A2, CT10-1540-A2, CT10-2540-A2, CT10-1020-G1, CT10-1030-G1, CT10-1040-G1, CT10-1025-G1, CT10-1540-G1, CT10-1530-G1, CT10-1030-G2, CT10-1040-G2, CT10-1530-G2, CT10-2040-G2, CT10-1030-G4, CT10-1040-G4, CT10-1540-GH4, CT10-1540-G4