General Resistance 5E10 Mini-Ohm Series

  • General Resistance

Product Features

  • Wirewound axial leaded precision resistor
  • Resistance range from 10Ω up to 200kΩ
  • Tight tolerances of ±0.01% and ±0.1%
  • TCR of ±5 ppm/°C
  • Power rating up to 0.2W (5E10D model)
  • Temperature range from -55°C up to +160°C

Applications

The 5E10 Mini-Ohm axial wirewound precision resistor series from General Resistance offers ultra-precision and excellent long term stability over temperature and time, with a resistance range from 10Ω up to 200kΩ. The 5E10 Mini-Ohm series utilises the highest quality copper alloy drawn from melts of known resistivity and controlled temperature coefficients. The windings are balanced multiple π for low reactance. Together these enable the 5E10 Mini-Ohm series to have excellent noise levels and lower TCR of ±5 ppm/°C maximum (from -55°C and +125°C).

  • Wirewound axial leaded precision resistor
  • Available in any resistance between 10Ω and 200kΩ
  • Stocked in many standard resistance values here at Rhopoint Components
  • Small axial leaded through-hole package
  • Excellent stability of ±50ppm/yr
  • Noise levels so small they are immeasurable
  • Wire gauge of 24AWG (0.4mm)
  • Tight tolerance options of ±0.01% (A) and ±0.1% (D) available for the full resistance range
  • TCR of ±5 ppm/°C maximum (from -55°C and +125°C)
  • Maximum working voltage of 175V
  • Power rating of 0.2W (±0.1%) and 0.125W (±0.01%) at +85°C
  • Maximum rated operating temperature +85°C
  • Temperature range from -55°C up to +160°C

 

The 5E10 Mini-Ohm axial wirewound precision resistor series offers ultra-precision in a small compact through-hole package, making them the ideal solution for test and measurement applications including test and calibration equipment.

Any custom resistance value between 10Ω and 200kΩ can be produced, with a low minimum order requirement of 10 pcs for non-standard parts (30 pc minimum order quantity for standard parts, where they are not stocked).

 

General Resistance 5G10 / 5E10 Mini-Ohm Series Specification Table

AttributesValue
Resistance value10Ω to 200kΩ
Tolerance±0.01% / ±0.1%
TCR±5ppm/°C (-55 to +125°C)
Temperature range-55°C to +160°C
Power rating *0.2W (±0.1%) / 0.125W (±0.01%)
Maximum Voltage175VDC (or AC peak)
Dielectric Withstanding Voltage1000Vrms (typical)
Stability±50ppm/yr.
Wire Gauge **24 AWG / 0.4mm

* For other tolerances, please contact us
** All leads are tinned copper

The General Resistance ultra-precision wirewound axial leaded resistor series have been used for over 50 years in precision measurement instruments by manufacturers around the world and should be specified whenever precision circuit operation is to be maintained over a prolonged period of time. Please visit www.primetechnology.com for more information on the General Resistance product line.

Clear
Quantity
Calculators and Convertors

Work out what you need for your project. Go to calculators and convertors

Contact us if you need your items quicker or need more than in stock.

Specifications

Dimensions 4.00 x 7.90mm
Product Type

Package / Size

Resistance Value

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Minimum Resistance

Maximum Resistance

Tolerance

,

Temperature Coefficient

Power Rating

,

Temperature Range (°C)

Series / Model

General Resistance 5E10 Mini-Ohm Series Ordering Info

Below is the model number configuration for the 5E10 series from General Resistance.

Ordering example: 5E10D 560R
5E10X XXXXX

Series / Model (5E10)

5E10
5E10

Tolerance (X)

A
±0.01%
D
±0.1%

Resistance Value (XXXXX)

Any custom resistance value between the range of 10Ω and 200kΩ. R (Ohms) or K (kOhms) designates the value range. For example 560R or 2.5K.

General Resistance 5E10 Mini-Ohm Series Resources

Product Datasheet

  • Energy
  • General Resistance

General Resistance 5E10 Mini-Ohm Series

Please be advised that due to the ongoing supply issues with raw materials affecting the global electronics industry, as well as an increase in orders received by our manufacturing partners, a large number of products are facing increased lead times in recent months. For the latest lead time and stock availability, please contact one of our engineers who will be happy to discuss lead times further and the potential for alternative parts.