Motion Control

Motion Control

Our range for Motion control market includes:

  • Isabellenhütte's innovative solution for battery management system applications - the IsaSCALE IVT-S is a plug-and-play module for precise current and voltage measurement in package fitting into palm of your hand
  • Magnetic sensors, digital isolators and low power switch sensors based on spintronic GMR (Giant Magnetoresistance) technology from NVE Corporation, including high temperature models
  • Metal clad thick film and wirewould resistors from RARA, including inductive and non-inductive designs, braking resistors
  • Range of short- and long sided thin film terminals from Susumu, including models with high power handling capacity, models suppressing the surface temperature and others
Show:
Sort By:

Core Sensors CS11 series

The CS11 compact media isolated pressure sensor series from Core Sensors is designed with a silicone sensing element which is isolated by a fluid filled cavity. Available with pressure ranges from 0-2 up to 2,000 PSI and with an accuracy of ≤ ±0.2% BFSL. The CS11 from Core offers a 10 mV/V output signal and either 316L SS or Hastelloy C276 wetted material for compatibility in a variety of medias and an operating temperature range of -40°C to +120°C. The CS11 sensor is an economical choice in applications with minimal installation space.

  • Compact media isolated pressure sensor
  • Pressure ranges available from 0-2 up to 2,000 PSI
  • Operating temperature −40°C to +120°C
  • Acuracy of ≤ ±0.2% BFSL
  • Burst pressure of 5x or 4,000 PSI whichever is less
  • Stability (1 year) of ≤ ±0.2% of FS
  • Pressure cycles of 10 million
  • Electrical output of 10mV/V
  • Compact design
  • Flush diaphragms available
  • Various process connections available in 316L SS or Hastelloy C276 wetted material for compatibility
  • Semi custom and custom designs available

Potential applications for the Core CS11 series include:

  • Water pressure monitoring
  • Pressure measurement in confined areas
  • Low pressure monitoring
  • General industrial equipment
  • Pressure control panels

Please see the below performance and thermal tables for the Core CS11 series:

Core CS11 Specifications

* Accuracy includes non-linearity, hysteresis and non-repeatability

£0.00 Ex Tax: £0.00

Core Sensors CS12 series

The CS12 OEM submersible pressure transducer series from Core Sensors is designed for liquid level measurement applications. Available with pressure range from 1 to 100 PSI and constructed using stainless steel (316L and 304) with an extruded EFTE cable jacket allows for installation in a variety of liquids. The CS12 from Core is available with various output signals of 4-20mA, 1-5V and 0.5-4.5V ratiometric, the precision welds and a high strength cable gland prevent liquids from entering the electronics. This sensor series has an operating temperature range of -40°C to +85°C with an accuracy of ≤ ±0.25% BFSL.

  • OEM submersible pressure transducer
  • Pressure ranges available from 1 PSI up to 100 PSI
  • 316L 33 diaphragm / oil filled sensor element
  • Operating temperature −40°C to +85°C
  • Accuracy of ≤ ±0.25% BFSL
  • Burst pressure of 5x or 1,250 PSI whichever is less
  • Stability (1 year) of ≤ ±0.25% of FS
  • Pressure cycles of 50 million
  • Electrical output options of 4-20mA,1-5V or 0.5-4.5V ratiometric
  • Removable nose cone

Potential applications for the Core CS12 series include:

  • Fuel Tank level measurement
  • Ballast tanks
  • Flood monitoring
  • Depth measurement

Please see the below performance and thermal tables for the Core CS12 series:

Core CS12 Specifications

* Accuracy includes non-linearity, hysteresis and non-repeatability

£0.00 Ex Tax: £0.00

Core Sensors CS13 series

The CS13 slim OEM submersible pressure transducer series from Core Sensors is designed for liquid level measurement applications. Available with pressure range from 1 to 100 PSI and stainless steel construction with a maximum diameter of 0.63" making this ideal for applications with limited space and a Hytrel submersible cable which allows for the sensor to be used in a variety of liquids. The CS13 from Core is available with various output signals of 4-20mA, 1-5V and 0.5-4.5V ratiometric, the precision welds and unique cable seal design prevents liquids from entering the electronics. This sensor series has an operating temperature range of -40°C to +85°C with an accuracy of ≤ ±0.25% BFSL.

  • Slim submersible pressure transducer
  • Pressure ranges available from 1 PSI up to 100 PSI
  • 316L 33 diaphragm / oil filled sensor element
  • Operating temperature −40°C to +85°C
  • Accuracy of ≤ ±0.25% BFSL
  • Burst pressure of 5 x or 1,250 PSI whichever is less
  • Stability (1 year) of ≤ ±0.25% of FS
  • Pressure cycles of 50 million
  • Electrical output options of 4-20mA,1-5V or 0.5-4.5V ratiometric
  • Reverse polarity and emi protection
  • Nose cone process connection

Potential applications for the Core CS13 series include:

  • Fuel Tank level measurement
  • Borehole
  • Flood monitoring
  • Depth measurement in confined spaces

Please see the below performance and thermal tables for the Core CS13 series:

Core CS13 Specifications

* Accuracy includes non-linearity, hysteresis and non-repeatability

£0.00 Ex Tax: £0.00

Core Sensors CS50 series

The CS50 non-incendive pressure transducer series from Core Sensors is a high strength sensor designed for use in hazardous areas with various CSA and ANS/UL approvals. Available with pressure ranges from 50 PSI to 30,000 PSI with an accuracy of ≤ ±0.25% BFSL. The CS50 from Core is all welded stainless steel construction with a selection of electrical outputs including 4-20mA, 1-5V, 1-6V, 0.5-.ratiometric or 0.5-2.5V non-ratiometric. A choice of process connections and wetted materials are also available with an operating temperature range of -40°C to +80°C.

  • Non-incendive pressure transducer
  • Pressure ranges available from 50 PSI to 30,000 PSI
  • Approvals CSA Class I, Division2, Groups A,B,C,D T4. ANSI/UL 122701 single seal. ABS (American bureau of shipping)
  • Operating temperature −40°C to +80°C
  • Accuracy of ≤ ±0.25% BFSL
  • Burst pressure of 5x or 60,000 PSI whichever is less
  • Stability (1 year) of ≤ ±0.25% of FS
  • Pressure cycles of 100 million
  • Electrical output options of 4-20mA,1-5V, 1-6V, 0.5-4.5V ratiometric or 0.5-2.5V non-ratiometric
  • Reverse polarity protection and EMI protection
  • One piece design
  • Various wetted materials available in 316L SS, 17-4PH, Hastelloy C276 (special order item) and Inconel 718 (special order item)
  • Please contact us for custom designs

Potential applications for the Core CS50 series include:

  • Natural gas compression
  • Oil exploration
  • Hydrogen compression / storage
  • Process Control
  • Test Stands

Please see the below performance and thermal tables for the Core CS50 series:

Core CS50 Specifications

* Accuracy includes non-linearity, hysteresis and non-repeatability

£0.00 Ex Tax: £0.00

Core Sensors CS51 series

The CS51 non-incendive low pressure transducer series from Core Sensors is a high strength sensor designed for use in hazardous areas with various CSA approvals. Available with pressure ranges from 20 PSI to 50 PSI with an accuracy of ≤ ±0.25% BFSL. The CS50 from Core is all welded stainless steel construction with a selection of electrical outputs including 4-20mA, 1-5V, 1-6V, 0.5-.ratiometric or 0.5-2.5V non-ratiometric. A choice of process connections and wetted materials are also available with an operating temperature range of -40°C to +80°C.

  • Non-incendive low pressure transducer
  • Pressure ranges available from 2 PSI to 50 PSI
  • Approvals CSA Class I, Division2, Groups A,B,C,D and T4
  • Operating temperature −40°C to +80°C
  • Accuracy of ≤ ±0.25% BFSL
  • Burst pressure of 5x or 245 PSI whichever is less
  • Stability (1 year) of ≤ ±0.25% of FS
  • Bi-directional pressure ranges available
  • Electrical output options of 4-20mA,1-5V, 1-6V, 0.5-4.5V ratiometric or 0.5-2.5V non-ratiometric
  • Reverse polarity protection and EMI protection
  • One piece design
  • Various wetted materials available in 316L SS and  Hastelloy C276 (special order item)
  • Please contact us for custom designs

Potential applications for the Core CS51 series include:

  • Natural gas compression
  • Oil exploration
  • External fuel tank level measurement
  • Process Control
  • Test Stands

Please see the below performance and thermal tables for the Core CS51 series:

Core CS51 Specifications

* Accuracy includes non-linearity, hysteresis and non-repeatability

£0.00 Ex Tax: £0.00

Core Sensors CS82 series

The CS82 intrinsically safe submersible pressure transducer series from Core Sensors, is designed for liquid level measurements in intrinsically safe areas, with CSA and ABS approvals. Available with pressure range from 2 PSI up to 50 PSI and constructed using stainless steel (316L and 304) with an extruded EFTE cable jacket allows for installation in a variety of liquids. The CS82 from Core is available with various output signals including 4-20mA, 1-5V, 0.5-4.5V ratiometric and  0.5-2.5V non-ratiometric, the precision welds and a high strength cable gland prevent liquids from entering the electronics. This sensor series has an operating temperature range of -40°C to +80°C with an accuracy of ≤ ±0.25% BFSL.

  • Intrinsically safe submersible pressure transducer
  • Pressure ranges available from 2 PSI up to 50 PSI
  • Operating temperature −40°C to +80°C
  • Accuracy of ≤ ±0.25% BFSL
  • Burst pressure of 5x or 250 PSI whichever is less
  • Stability (1 year) of ≤ ±0.25% of FS
  • Pressure cycles of 100 million
  • Electrical output options of 4-20mA,1-5V, 0.5-4.5V ratiometric or 0.5-2.5V non-ratiometric
  • Removable nose cone  for threaded installation
  • ETFE cable jacket for high corrosion resistance

Approvals for the Core CS80 series include:

  • CSA Class I, division 1, groups C, D T4 
  • Class I, zone 0 AEx ia IIB T4 Ga
  • ABS (American bureau of shipping)

Potential applications for the Core CS82 series include:

  • Fuel Tank level measurement
  • Ballast tanks
  • Fuel tank level monitoring
  • Measurement in flood prone areas
  • Depth measurement

Please see the below performance and thermal tables for the Core CS82 series:

Core CS82 Specifications

* Accuracy includes non-linearity, hysteresis and non-repeatability

£0.00 Ex Tax: £0.00

Isabellenhütte IVT-S Series

The IVT-S intelligent current and voltage measurement module is a shunt-based plug-and-play measurement system, continuously measuring current from a selection of 5 current ranges (100A, 300A, 500A, 1000A and 2500A), converting the information into a digital signal and communicating the signal via the industry standard CANbus 2.0 interface. The data is processed utilising a 16-bit AD converter at the speed of 1kHz. The modules are offered as a modular design, with the optional extras including outputs for voltage monitoring (three voltage channels are supplied, ideal for battery or relay monitoring applications) and additional CAN port to enable daisy chaining, all in a compact package of only 84x83.2x16.2mm. The IVT-S modules offer guaranteed galvanic isolation up to 1000V making it suitable for high voltage applications. The temperature sensor within the module is utilised for temperature calibration, ensuring excellent precision of ±0.5% across the whole temperature range, for greater safety, and to provide temperature reading off the shunt as requried.

  • Intelligent shunt-based current and voltage measurement sensor for high voltage applications
  • Choice of 5 different nominal current ranges: 100A, 300A, 500A, 1000A and 2500A, with generous overcurrent allowance
  • Optional 3-channel voltage measurement ports and extra CAN port
  • Outputs for modules with voltage measurement include: current, 3x voltage, temperature (at shunt), power, current counter (As) and energy counter (Wh)
  • Outputs for modules without voltage measurement include: current, temperature (at shunt) and current counter (As)
  • Communicates via CANbus 2.0 interface
  • Operating temperature of -40° to +105°C
  • Accuracy of ±0.4% of reading for current measurement, ±0.5% for voltage across the complete temperature range
  • Dielectric strength of 1000V

The applications for the IVT-S current and voltage measurement module series include:

  • Hybrid and full electric drives
  • UPS systems
  • Stationary energy storage systems
  • Fuel cells
  • All battery and storage based applications

The below table gives the specifications available for the Isabellenhütte IVT-S module series:

Isabellenhütte IVT-S Specifications

£0.00 Ex Tax: £0.00

NVE AFL000-00E

The AFL000-00E low power switch sensor from NVE integrates GMR sensor elements with digital onboard signal processing electronics. The switch is designed for use in low power and battery applications, and features supply voltages down to 0.9 Volts and continuous operation at currents between 20 to 55 microamps. Like all NVE magnetic sensors, the AFL sensors have extremely precise magnetic operate point of 10Oe (typ.) and release differential of between 1Oe and 6Oe.

  • GMR low power switch sensor
  • Precision magnetic operate point of 10Oe
  • Low supply voltage between 0.9 and 1.3V
  • Supply current between 20μA and 55 μA
  • Digital output
  • Release differential range from 1Oe to 6Oe
  • Omnipolar response
  • Operating Temperature range from -20°C to +85°C
  • Frequency response of 100KHz
  • MSOP8 Package

The NVE AFL000-00E GMR low power switch sensor covers the following applications:

  • Motion, speed, and position control
  • Proximity sensing
  • Portable instruments
  • Utility meters
  • Noncontact over current protection
  • Battery powered applications

The below table gives the full specifications of the NVE AFL series including the AFL000-00E

NVE AFL000-00E Specifications

£0.00 Ex Tax: £0.00

NVE AFL000-10E

The AFL000-10E low power switch sensor from NVE integrates GMR sensor elements with digital onboard signal processing electronics. The switch is designed for use in low power and battery applications, and features supply voltages down to 0.9 Volts and continuous operation at currents between 20 to 55 microamps. The AFL series from NVE magnetic sensors, have extremely precise magnetic operate point of 10Oe (typ.) and release differential of between 1Oe and 6Oe.

  • GMR low power switch sensor
  • Precision magnetic operate point of 10Oe
  • Low supply voltage between 0.9 and 1.3V
  • Supply current between 20μA and 55 μA
  • Digital output
  • Release differential range from 1Oe to 6Oe
  • Omnipolar response
  • Operating Temperature range from -20°C to +85°C
  • Frequency response of 100kHz
  • TDFN6 Package

The NVE AFL000-10E GMR low power switch sensor covers the following applications:

  • Motion, speed, and position control
  • Proximity sensing
  • Portable instruments
  • Utility meters
  • Noncontact over current protection
  • Battery powered applications

The below table gives the full specifications of the NVE AFL series including the AFL000-10E

NVE AFL000-10E Specifications

£0.00 Ex Tax: £0.00

NVE AFL001-10E

The AFL001-10E low power switch sensor from NVE integrates GMR sensor elements with digital onboard signal processing electronics. The switch is designed for use in low power and battery applications, and features supply voltages down to 0.9 Volts and continuous operation at currents between 20μA to 55μA. The AFL series from NVE magnetic sensors, have extremely precise magnetic operate point of 20Oe (typ.) and release differential of between 3Oe and 10Oe.

  • GMR low power switch sensor
  • Precision magnetic operate point of 20Oe
  • Supply voltage between 0.9V and 2V
  • Supply current between 20μA and 55μA
  • Digital output
  • Release differential range from 3Oe to 10Oe
  • Omnipolar response
  • Operating Temperature range from -20°C to +85°C
  • Frequency response of 100kHz
  • TDFN6 Package

The NVE AFL000-10E GMR low power switch sensor covers the following applications:

  • Motion, speed, and position control
  • Proximity sensing
  • Portable instruments
  • Utility meters
  • Noncontact over current protection
  • Battery powered applications

The below table gives the full specifications of the NVE AFL series including the AFL001-10E

NVE AFL001-10E Specifications

£0.00 Ex Tax: £0.00

NVE AFL002-10E

The AFL002-10E low power switch sensor from NVE integrates GMR sensor elements with digital onboard signal processing electronics. The switch is designed for use in low power and battery applications, and features supply voltages down to 0.9 Volts and continuous operation at currents between 20μA to 55μA. The AFL series from NVE magnetic sensors, have extremely precise magnetic operate point of 28Oe (typ.) and release differential of between 3Oe and 10Oe.

  • GMR low power switch sensor
  • Precision magnetic operate point of 28Oe (typ.)
  • Supply voltage between 0.9V and 2V
  • Supply current between 20μA and 55μA
  • Digital output
  • Release differential range from 3Oe to 10Oe
  • Omnipolar response
  • Operating Temperature range from -20°C to +85°C
  • Frequency response of 100kHz
  • TDFN6 Package

The NVE AFL000-10E GMR low power switch sensor covers the following applications:

  • Motion, speed, and position control
  • Proximity sensing
  • Portable instruments
  • Utility meters
  • Noncontact over current protection
  • Battery powered applications

The below table gives the full specifications of the NVE AFL series including the AFL002-10E

NVE AFL002-10E Specifications

£0.00 Ex Tax: £0.00

NVE AFL005-10E

The AFL005-10E low power switch sensor from NVE integrates GMR sensor elements with digital onboard signal processing electronics. The switch is designed for use in low power and battery applications, and features supply voltages down to 0.9 Volts and continuous operation at currents between 20μA to 55μA. The AFL series from NVE magnetic sensors, have extremely precise magnetic operate point of 7Oe (typ.) and release differential of between 3Oe and 10Oe.

  • GMR low power switch sensor
  • Precision magnetic operate point of 7Oe (typ.)
  • Supply voltage between 0.9V and 2V
  • Supply current between 20μA and 55μA
  • Digital output
  • Release differential range from 4Oe to 10Oe
  • Omnipolar response
  • Operating Temperature range from -20°C to +85°C
  • Frequency response of 100kHz
  • TDFN6 Package

The NVE AFL005-10E GMR low power switch sensor covers the following applications:

  • Motion, speed, and position control
  • Proximity sensing
  • Portable instruments
  • Utility meters
  • Noncontact over current protection
  • Battery powered applications

The below table gives the full specifications of the NVE AFL series including the AFL005-10E

NVE AFL005-10E Specifications

£0.00 Ex Tax: £0.00

NVE AFL006-10E

The AFL006-10E low power switch sensor from NVE integrates GMR sensor elements with digital onboard signal processing electronics. The switch is designed for use in low power and battery applications, and features supply voltages down to 0.9 Volts and continuous operation at currents between 20μA to 55μA. The AFL series from NVE magnetic sensors, have extremely precise magnetic operate point of 4Oe (typ.) and release differential of between 1Oe and 3Oe.

  • GMR low power switch sensor
  • Precision magnetic operate point of 4Oe (typ.)
  • Supply voltage between 0.9V and 2V
  • Supply current between 20μA and 55μA
  • Digital output
  • Release differential range from 1Oe to 3Oe
  • Omnipolar response
  • Operating Temperature range from -20°C to +85°C
  • Frequency response of 100kHz
  • TDFN6 Package

The NVE AFL005-10E GMR low power switch sensor covers the following applications:

  • Motion, speed, and position control
  • Proximity sensing
  • Portable instruments
  • Utility meters
  • Noncontact over current protection
  • Battery powered applications

The below table gives the full specifications of the NVE AFL series including the AFL006-10E

NVE AFL006-10E Specifications

£0.00 Ex Tax: £0.00

NVE AFL020-00E

The AFL020-00E low power switch sensor from NVE integrates GMR sensor elements with digital onboard signal processing electronics. The switch is designed for use in low power and battery applications, and features supply voltages down to 0.9 Volts and continuous operation at currents between 30μA to 75μA. The AFL series from NVE magnetic sensors, have extremely precise magnetic operate point of 10Oe (typ.) and release differential of between 1Oe and 6Oe.

  • GMR low power switch sensor
  • Precision magnetic operate point of 10Oe (typ.)
  • Supply voltage between 0.9V and 2V
  • Supply current between 30μA and 75μA
  • Digital output
  • Release differential range from 1Oe to 6Oe
  • Omnipolar response
  • Operating Temperature range from -20°C to +85°C
  • Frequency response of 100kHz
  • MSOP8 Package

The NVE AFL020-00E GMR low power switch sensor covers the following applications:

  • Motion, speed, and position control
  • Proximity sensing
  • Portable instruments
  • Utility meters
  • Noncontact over current protection
  • Battery powered applications

The below table gives the full specifications of the NVE AFL series including the AFL020-00E

NVE AFL020-00E Specifications

£0.00 Ex Tax: £0.00

NVE AFL030-00E

The AFL030-00E low power switch sensor from NVE integrates GMR sensor elements with digital onboard signal processing electronics. The switch is designed for use in low power and battery applications, and features supply voltages down to 0.9 Volts and continuous operation at currents between 15μA to 55μA. The AFL series from NVE magnetic sensors, have extremely precise magnetic operate point of 10Oe (typ.) and release differential of between 1Oe and 6Oe.

  • GMR low power switch sensor
  • Precision magnetic operate point of 10Oe (typ.)
  • Supply voltage between 0.9V and 2V
  • Supply current between 15μA and 55μA
  • Digital output
  • Release differential range from 1Oe to 6Oe
  • Omnipolar response
  • Operating Temperature range from -20°C to +85°C
  • Frequency response of 100kHz
  • MSOP8 Package

The NVE AFL030-00E GMR low power switch sensor covers the following applications:

  • Motion, speed, and position control
  • Proximity sensing
  • Portable instruments
  • Utility meters
  • Noncontact over current protection
  • Battery powered applications

The below table gives the full specifications of the NVE AFL series including the AFL030-00E

NVE AFL030-00E Specifications

£0.00 Ex Tax: £0.00