19 series

  • Weidmüller
  • Female plug in connector
  • Rated current for minimum number of poles 17A (IEC) and 10A (UL)
  • Dimensions of L1 3.5mm to 80.5mm (depending on the number of poles required)
  • Clamping yoke screw connection
  • Clamping range from 0.08mm² to 1.5mm²
  • Wire connection cross section from AWG 28 to AWG 14
  • Temperature range −50°C up to +100°C
  • CSA and UL 1059 approved, IEC listed
  • Weidmüller
  • Female plug in connector
  • Rated current for minimum number of poles 17.5A (IEC) and 10A (UL)
  • Dimensions of L1 3.5mm to 80.5mm (depending on the number of poles required)
  • Push in spring connection
  • Clamping range from 0.14mm² to 1.5mm²
  • Wire connection cross section from AWG 26 to AWG 16
  • Temperature range −50°C up to +120°C
  • CSA and UL 1059 approved, IEC listed
  • Weidmüller
  • High current female plug in connector
  • Rated current for minimum number of poles 24A (IEC) and 18.5A (UL)
  • Dimensions of L1 5.08mm to 116.84mm (depending on the number of poles required)
  • Clamping range from 0.13mm² to 3.31mm²
  • Wire connection cross section from AWG 26 to AWG 12
  • Temperature range −50°C up to +100°C
  • CSA and UL 1059 approved, IEC listed
  • Weidmüller
  • High current female plug in connector
  • Rated current for minimum number of poles 23A (IEC) and 20A (UL)
  • Dimensions of L1 5.08mm to 116.84mm (depending on the number of poles required)
  • Clamping yoke screw connection
  • Clamping range from 0.13mm² to 4mm²
  • Wire connection cross section from AWG 30 to AWG 12
  • Temperature range −50°C up to +100°C
  • CSA and UL 1059 approved, IEC listed
  • Weidmüller
  • PCB terminal connector
  • Rated current for minimum number of poles 17.5A (IEC) and 15A (UL)
  • Dimensions of L1 5.08mm to 119.84mm (depending on the number of poles required)
  • SMT solder connection with a solder pin length of 3.5mm
  • Wire connection cross section from AWG 24 to AWG 14
  • Temperature range of −50°C to +120°C
  • CSA and UL 1059 approved, IEC listed
  • Weidmüller
  • PCB terminal connector
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Dimensions of L1 3.5mm to 80.5mm (depending on the number of poles required)
  • SMT solder connection with a solder pin length of 3.5mm
  • Wire connection cross section from AWG 28 to AWG 14
  • Temperature range of −50°C to +120°C
  • CSA and UL 1059 approved, IEC listed
  • Weidmüller
  • PCB terminal connector
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Dimensions of L1 3.5mm to 80.5mm (depending on the number of poles required)
  • SMT solder connection with a solder pin length of 3.5mm
  • Wire connection cross section from AWG 28 to AWG 14
  • Temperature range of −50°C to +120°C
  • CSA and UL 1059 approved, IEC listed
  • Weidmüller
  • PCB terminal connector with male header and closed housing
  • Rated current for minimum number of poles 17A (IEC) and 10A (UL)
  • Dimensions of L1 3.5mm to 80.5mm (depending on the number of poles required)
  • THT solder connection with a solder pin length of 3.2mm
  • Temperature range −50°C to +100°C
  • CSA and UL 1059 approved, IEC listed
  • Weidmüller
  • PCB terminal connector with male header
  • Rated current for minimum number of poles 24A (IEC) and 18.5A (UL)
  • Dimensions of L1 5.08mm to 116.84mm (depending on the number of poles required)
  • THT solder connection with a solder pin length of 3.2mm
  • Temperature range −50°C to +100°C
  • CSA and UL 1059 approved, IEC listed
  • Weidmüller
  • PCB terminal connector with male header and closed housing
  • Rated current for minimum number of poles 15A (IEC) and 10A (UL)
  • Dimensions of L1 3.5mm to 80.5mm (depending on the number of poles required)
  • Pin length of 3.2mm suitable for wave or reflow soldering
  • Temperature range −50°C to +100°C
  • CSA and UL 1059 approved, IEC listed
  • Weidmüller
  • PCB terminal connector with male header and closed housing
  • Rated current for minimum number of poles 15A (IEC) and 10A (UL)
  • Dimensions of L1 3.5mm to 80.5mm (depending on the number of poles required)
  • Pin length of 3.2mm suitable for wave or reflow soldering
  • Temperature range −50°C to +100°C
  • CSA and UL 1059 approved, IEC listed
Please be advised that due to the ongoing supply issues with raw materials affecting the global electronics industry, as well as an increase in orders received by our manufacturing partners, a large number of products are facing increased lead times in recent months. For the latest lead time and stock availability, please contact one of our engineers who will be happy to discuss lead times further and the potential for alternative parts.