General Resistance 8E16 Econistor Series

  • General Resistance

Product Features

  • Wirewound axial leaded precision resistor
  • Resistance range from 1Ω up to 699kΩ
  • Tight tolerances of ±0.01% and ±0.1%
  • TCR of ±5 ppm/°C
  • Power rating up to 0.33W (8E16D model)
  • Temperature range from -55°C up to +160°C

Applications

  • Non-compliant

The 8E16 Econistor axial wirewound precision resistor series from General Resistance offers ultra-precision and excellent long term stability over temperature and time, with a resistance range from 1Ω up to 699kΩ. The 8E16 Econistor series utilises the highest quality copper alloy drawn from melts of known resistivity and controlled temperature coefficients. The windings are balanced multiple π for low reactance. Together these enable the 8E16 Econistor series to have excellent noise levels and lower TCR of ±5 ppm/°C maximum (from -55°C and +125°C).

  • Wirewound axial leaded precision resistor
  • Available in any resistance between 1Ω and 699kΩ including custom values
  • Stocked in many standard resistors and RTD simulation values here at Rhopoint Components
  • Wire gauge of 20AWG (0.6mm)
  • Excellent stability of ±35ppm/yr
  • Noise levels so small they are immeasurable
  • Tight tolerance options of ±0.01% (A) and ±0.1% (D) available for the full resistance range
  • TCR of ±5 ppm/°C maximum (from -55°C and +125°C)
  • Maximum working voltage of 200V
  • Power rating of 0.33W (±0.1%) and ≈0.2W (±0.01%) at +85°C
  • Maximum rated operating temperature +85°C
  • Temperature range from -55°C up to +160°C

 

The 8E16 Econistor axial wirewound precision resistor series is the ideal solution for test and measurement applications including RTD temperature simulation resistors and test and calibration equipment. We stock 21 Pt100 simulation resistance values as standard here at Rhopoint Components, with temperatures from -100°C up to +400°C.

Any custom resistance value between 1Ω and 699kΩ can be produced, with a low minimum order requirement of 10 pcs for non-standard parts, including additional RTD simulation values that are not standard stocked items (30 pc minimum order quantity for standard parts, where they are not stocked).

 

General Resistance 8G16 / 8E16 Econistor Series Specification Table

AttributesValue
Resistance value1Ω to 699kΩ
Tolerance *±0.01% / ±0.1%
TCR±5ppm/°C (-55 to +125°C)
Temperature range-55°C to +160°C
Power rating0.33W (±0.1%) / 0.2W (±0.01%)
Maximum Voltage200VDC (or AC peak)
Dielectric Withstanding Voltage1000Vrms (typical)
Stability±35ppm/yr.
Wire Gauge **22 AWG / 0.6mm

* For other tolerances, please contact us
** All leads are tinned copper

The General Resistance ultra-precision wirewound resistors have been used for over 50 years in precision measurement instruments by manufacturers around the world and should be specified whenever precision circuit operation is to be maintained over a prolonged period of time. Please visit www.primetechnology.com for more information on the General Resistance product line.

Clear
Quantity
Calculators and Convertors

Work out what you need for your project. Go to calculators and convertors

Contact us if you need your items quicker or need more than in stock.

Specifications

Dimensions 6.40 x 12.70mm
Product Type

Package / Size

Resistance Value

, , , , , , , , , , , , , , , , , , , , , , , , , , ,

Minimum Resistance

Maximum Resistance

Tolerance

,

Temperature Coefficient

Power Rating

,

Temperature Range (°C)

Series / Model

General Resistance 8E16 Econistor Series Ordering Info

Below is the model number configuration for the 8E16 series from General Resistance.

Ordering example: 8E16D 125R
8E16X XXXXX

Series / Model (8E16)

8E16
8E16

Tolerance (X)

A
±0.01%
D
±0.1%

Resistance Value (XXXXX)

Any custom resistance value between the range of 1Ω and 699kΩ. R (Ohms) or K (kOhms) designates the value range. For example 125R or 2.2K.

General Resistance 8E16 Econistor Series Resources

Product Datasheet

  • Energy
  • General Resistance

General Resistance 8E16 Econistor Series

Please be advised that due to the ongoing supply issues with raw materials affecting the global electronics industry, as well as an increase in orders received by our manufacturing partners, a large number of products are facing increased lead times in recent months. For the latest lead time and stock availability, please contact one of our engineers who will be happy to discuss lead times further and the potential for alternative parts.