![Rhopoint Components Logo Blue/Black (smaller version) [SVG]](https://www.rhopointcomponents.com/wp-content/uploads/2020/09/RC-logo-master.svg){kind=logo}
The LLFS 7.50/180V PCB terminal series from Weidmüller’s Omnimate power range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 180° and a choice from 2 up to 12 poles and a 7.5mm pitch. The LLFS 7.50/180V series from Weidmüller have a fully automatic assembly using wave soldering (THT) and can be used with or without ferrules, with an operating temperature range of −40°C to +120°C .
- PCB terminal connector
- Through-hole technology with wave soldering
- Number of poles available from 2 to 12
- Solder pin length of 5mm
- Pitch of 7.5mm
- Conductor outlet direction of 180°
- Push in technology
- Wire connection cross section from AWG 24 to AWG 8
- CSA and UL 1059 approved, IEC listed
- Dimmensions for L1 from 7.5mm to 82.5mm depending on the number of poles required
- Rated current for minimum number of poles 41A (IEC) and 37A (UL)
- Black in colour (additional colours available on request)
- Packaged in box
- Temperature range −40°C to +120°C
The Sturdy, direct connection for extreme current and voltage requirements in all power electronics applications for the LLFS 7.50/180V series include:
- Solar inverters
- Frequency converters
- Servo-controllers
- Power Supplies
The below table gives the specifications of the Weidmüller LLFS 7.50/180V PCB terminal series:
Please see the relevant datasheet in the technical library for the exact specification
