The MS series of cable end float switches by Cynergy3 utilises a microswitch element activated by a moving stainless steel ball with lifetime of 200,000 operations. The switch is hermetically sealed within a HDPE casing filled with non-hygroscopic closed-cell polyurethane, enabling it to work as much as 100m deep in water. The MS series features a selection of contact forms (n/o, n/c and c/o), direct switching power and protective earth conductor included as standard (except for c/o versions). The switching element is UL, VDE and CENELEC approved. The switches are supplied with 5m length of WRAS approved cable with and can be operated in temperatures between 0°C and +45°C (WRAS approved to +23°C).
- WRAS Approved Cable end float switch
- Microswitch switching element is UL, VDE and CENELEC approved
- Maximum switching voltage of 250Vac and 24Vdc
- Selection of normally-open, normally-closed and changeover contact forms
- Temperature range of 0°C to 45°C (WRAS approved to 23°C)
- WRAS approved cable
- Direct power switching
- Cable mounting
- 100m depth capability
Typical applications for the Cynergy3 MS series of float switches include:
- Large tanks, cisterns and reservoirs
- Direct installation on submersible pumps
The below table gives the full specifications for each resistor model available including the Cynergy3 MS series: