Core Sensors CS12 Series

  • Core Sensors

Product Features

  • Submersible pressure transducer
  • Pressure ranges from 1 to 100 PSI
  • Accuracy down to ≤±0.25% BFSL
  • Stability (1 year) of ≤±0.25% of FS
  • Pressure cycles of 50 million
  • Overpressure of 2x minimum
  • Burst pressure of 5x or 500 PSI

Applications


The CS12 Submersible Pressure Transducer is the ideal solution for continuous liquid level measurement. This transducer is engineered using 304 or 316L stainless steel construction, corrosion resistant ETFE cable jacket, and a Nylon strain relief for maximum versatility in a wide range of applications. The CS12 can also be utilised for non-submersible applications where flooding is a concern. 100 PSI is the maximum pressure rating for submersion however for non-submersible applications, the CS12 can be configured above 100 PSI, ensuring continuous pressure measurement even during flooding events. This pressure transducer is available with various outputs, an accuracy of ≤±0.25% BFSL and an operating temperature range of -40°C to +85°C.

  • Submersible pressure transducer
  • Pressure ranges available from 1 PSI to 100 PSI
  • Accuracy down to ≤±0.25% BFSL
  • Stability (1 year) of ≤±0.25% of FS
  • Pressure cycles of 50 million
  • Overpressure of 2x minimum
  • Burst pressure of 5x or 500 PSI (whichever is less)
  • Electrical output options of 4-20mA, 1-5V, 0.5-2.5V non-ratiometric or 0.5-4.5V ratiometric
  • Temperature range −40°C to +85°C
  • 304 or 316L stainless steel construction
  • IP68 rated
  • ETFE cable jacket with wide diameter vent tube
  • Removable nose cone

Typical applications for the CS12 submersible pressure transducer series include:

  • Ballast tanks
  • Flood monitoring
  • Depth measurement
  • Level monitoring


Performance, Thermal, Environmental & Physical Specifications Table

AttributeValue
Accuracy @ 25°C *≤±0.25% BFSL
≤±0.5% BFSL (≤2 PSI & below)
Stability (1 Year)≤±0.25% of FS
Pressure Cycles50 million
Overpressure2x minimum
Burst Pressure5x or 500 PSI (whichever is less)
Maximum Submersion100 PSI
Operating Temperature-40°C to +85°C
Compensated Temperature0°C to +55°C
Storage Temperature-40°C to 125°C
TC Zero≤±1% of FS
≤±2% of FS (2 PSI & below)
TC Span≤±1% of FS
≤±2% of FS (2 PSI & below)
EMI / RFI ProtectionYes
IP RatingIP68
Vibration10g, 20 to 2000Hz
Shock100g, 11msec, 1/2 sine
Weight (ex cable)~0.50lb
Cable Conductors22 AWG
Cable Pull Strength150lb

* Accuracy includes non-linearity, hysteresis and non-repeatability

Electrical Specifications (Voltage)

AttributeValue
Outputs1 to 5V
1 to 6V
Excitation10 to 28VDC
Current Consumption<10mA
Output Load5kΩ (minimum)
Frequency Response~1kHz (minimum)
Zero Offset (of FS)≤±0.5% (typical)
±1% maximum
Span Tolerance (of FS)≤±0.5% (typical)
±1% maximum

Electrical Specifications (Voltage)

AttributeValue
Outputs1 to 5V
Excitation10 to 28VDC
Current Consumption<10mA
Output Load5kΩ (minimum)
Frequency Response~1kHz (minimum)
Zero Offset (of FS)≤±0.5% (typical)
±1% maximum
Span Tolerance (of FS)≤±0.5% (typical)
±1% maximum

Electrical Specifications (Low Power Voltage)

AttributeValue
Outputs0.5 to 2.5V non-ratiometric
Excitation3 to 5VDC unregulated
Current Consumption≤3mA
Output Load5kΩ (minimum)
Frequency Response~1kHz (minimum)
Zero Offset (of FS)≤±0.5% (typical)
±1% maximum
Span Tolerance (of FS)≤±0.5% (typical)
±1% maximum

Electrical Specifications (Millivolt)

AttributeValue
Outputs10mV/V
Excitation5VDC (typical)
Current Consumption<5mA
Output Impedance >1MΩ
Frequency Response~5kHz (minimum)
Zero Offset (of FS)≤±2% (maximum)
Span Tolerance (of FS)≤±2% (maximum)


Core Sensors design and manufacture high-quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allow Core to create solutions to some of the most complex sensor requirements. Please visit https://core-sensors.com for more information.

Clear
Quantity
Calculators and Convertors

Work out what you need for your project. Go to calculators and convertors

Contact us if you need your items quicker or need more than in stock.

Specifications

Product Type

Process Connection

,

Wetted Material

Pressure Range

Pressure Unit

, ,

Pressure Type

Output

, , ,

Electrical

Options

Lead Length

, , , ,

Accuracy

,

Temperature Range (°C)

Series / Model

,

Core Sensors CS12 Series Ordering Info

Below is the model number configuration for the CS12 series from Core Sensors.

Ordering example: CS12-6A00005PG4Z000-10
CS12XXXXXXXXXXXXXXXX

Series / Model (CS12)

CS12
CS12

Process Connection (X)

2
1/4” Male NPT
6
Nose Cone

Wetted Material (X)

A
316L SS

Pressure Range (XXXXX)

Insert 5-digit pressure code, max 100 PSI
i.e. 00100 = 100 PSI

Pressure Unit (X)

B
Bar
P
PSI
W
Inches of H2O

Pressure Type (X)

G
Gauge

Output (X)

1
1 to 5V
2
0.5 to 4.5V ratiometric
4
4 to 20mA
8
0.5 to 2.5V non-ratiometric

Electrical (X)

Z
1/2” MNPT conduit with Nylon strain relief

Options (XXX)

000
No special options

Lead Length (XX)

05
5m
10
10m
16
16m
20
20m
31
31m

Core Sensors CS12 Series Resources

Product Datasheet

Supporting Product Information

Supporting Manufacturer Information

  • Core Sensors
Core Sensors CS12 / CS82 Pressure Transducer Product Image

Core Sensors CS12 Series

Please be advised that due to the ongoing supply issues with raw materials affecting the global electronics industry, as well as an increase in orders received by our manufacturing partners, a large number of products are facing increased lead times in recent months. For the latest lead time and stock availability, please contact one of our engineers who will be happy to discuss lead times further and the potential for alternative parts.