Telephone +44 (0) 1342 330 470

Monday to Thursday: 08.30 to 17.00 (GMT)
Friday: 08.30 to 12.45 (GMT)

PRODUCT SEARCH
Portal

GMR gear tooth & encoder sensors



5 Item(s)

per page

Set Descending Direction
  1. ABL series analogue o/p dual and single bridge sensors

    ABL series analogue o/p dual and single bridge sensors

    This series of digital output devices is designed for use in industrial speed applications where magnetic detection of gear teeth or magnetic encoder wheels is required. The DD series sensor signal processing IC can be used together with this sensor.

    • 5-100 Oe sensitivity
    • Sine/cosine output
    • 190°C maximum operational temperature
    • Small & low profile
    More Info
  2. AG920-07 Gear tooth sensor starter engineering kit

    AG920-07 Gear tooth sensor starter engineering kit

    Included in the kit are one of each type of GT sensor products, both analogue and digital, plus two of the DD001-12 signal processing ICs to convert the analogue output of the ABL sensors to digital.Also included is a small container of solder paste with instructions on soldering to the TDFN-SO8 package.

    • Kit includes magnets and PCBs
    • Analogue and digital output sensors
    More Info
  3. AKL series digital output gear tooth and encoder sensor

    AKL series digital output gear tooth and encoder sensor

    The pulse (high) output from the sensor corresponds to the gear tooth passing in front of it. When the tooth moves away the output goes low giving a pusle train that provides speed information from the gear or encoder. The sensor is configured as a two wire device. Output states are indicated by a change of current though the part.

    • 6x5mm low profile sm package
    • Two wire configuration
    • DC (zero speed) operation
    • Excellent temperature and voltage performance
    More Info
  4. DB series power switch

    DB series power switch

    The DB series power switch ICs are designed to take a digital input from a sensor element, and provide a high current switched output corresponding with the sensor input.

    • Designed to work with AD9xx sensors
    • 200mA current output
    • Short circuit, reverse battery, and transient protection
    • Small size
    More Info
  5. DD series signal processing IC for analog GT sensors

    DD series signal processing IC for analog GT sensors

    This device can be located away from the sensor. If a dual ABL bridge is being used two DD parts can be employed to give both speed and phase outputs which can subsequently be used to determine direction.

    • Corrects magnet position and strength offsets
    • 2 wire output
    • 50% duty cycle
    • Zero speed operation
    More Info

5 Item(s)

per page

Set Descending Direction