Telephone +44 (0) 1342 330 470

Monday to Thursday: 08.30 to 17.00 (GMT)
Friday: 08.30 to 12.45 (GMT)

PRODUCT SEARCH
Portal

Accessories & instruments



6 Item(s)

per page

Set Descending Direction
  1. 225-10-0X0 Series Immersion Temperature Probe

    225-10-0X0 Series Immersion Temperature Probe

    For temperatures up to +150°C the 225-01-010 Series can be customized to just about any temperature application!

    • Operating Temperature:- 40°F to +302°F (-40°C to + 150°C)
    • Temperature Total Error Band: ±0.5°F.
    • RS-485 Programmable, Digital Output.
    • Full Inflow/Immersion Style Temperature Measurement.
    More Info
  2. 8G16A Econistor RTD simulation resistors -100°C to 400°C

    8G16A Econistor RTD simulation resistors -100°C to 400°C

    The General Resistance 8G16A range of precision axial wirewound resistors gives excellent long term stability over temperature and time.  Utilizing balanced multiple π, low reactance windings and an exclusive 'air cushion' technique, providing virtually stress free elements which results in a full load stability ±35ppm maximum over 10,000 hours.  This makes the resistor an ieal solution for test and measurement applications; most suitably RTD temperature simulation resistors and for use in test and calibration equipment.

    Each resistor undergoes multiple tests during manufacture including accelerated ageing and a thermal shock procedure.

    • 21 Pt100 simulation values currently available from stock.
    • RTD simulation  temperatures between -100°C to +400°C
    • ±5ppm/°C TCR between -55°C to +125°C
    • ±0.01% tolerance.
    • Ideal for calibration and testing.
    • IPTS-68 compliant.
    More Info
  3. Accessories for RPL probes

    Accessories for RPL probes

    • Instruments
    • Compression fittings
    • Thermowells and pockets
    • Themocouple wires and connectors
    More Info
  4. Fabricated Pocket RPL51-TW series

    Fabricated Pocket RPL51-TW series

    This pocket is ideally suited for use with the RPL2, RPL4 and RPL5 sensors. Various common options are shown on this data sheet but this is not an exhaustive list, please contact us with your requirements.

    • Other industry standard connections are available
    • Threaded
    • Flanged
    More Info
  5. Sensor pockets and compression fittings

    Sensor pockets and compression fittings

    Sensor pockets are ideal for applications where the sensor may need to be removed from time to time, as the sensor can be removed without the need to drain down the whole system. However the additional thermal mass of the pocket will slow down the speed of response of the sensor. Compression fittings allow a faster speed of response , but if the sensor needs to be replaced, then the system may need to be drained first.

     

    • Other industry standard connections are available
    • Threaded
    • Flanged
    • Hygienic connections - RJT, IDF, Tri-clamp and others
    More Info
  6. Terminal heads RPL series

    Terminal heads RPL series

    • Standard and miniature sizes available
    • IP86 versions
    • Plastic, aluminium, stainless steel
    More Info

6 Item(s)

per page

Set Descending Direction