Temperature Transducers and Probes

Temperature Transducers and Probes
Show:
Sort By:

Core Sensors CS20 series

The CS20 industrial temperature transmitter series from Core Sensors is designed for temperature measurement applications with configurable temperature ranges from −40°C up to +200°C available as well as various probe lengths. The CS20 series from Core includes a 316L SS probe and thread with a stainless steel housing, making it compatible with a wide range of process liquids and gases. A range of standard amplified outputs comprise 4-20mA, 1-5V or 0.5-4.5V ratiometric and a choice of electrical connections are also available.

  • Industrial temperature transmitter
  • RTD sensor type
  • Maximum pressure of 7,250 PSI (<2 inch probe) or 2,175 PSI (>2inch probe)
  • Configurable temperature range of −40°C to +200°C
  • Accuracy of ≤ ±0.4% BFSL
  • Total error at RT (of FS) ±0.5% typical, ±1% max
  • Total error at FS (of FS) ±2% max
  • Electrical output options of 4-20mA, 1-5V or 0.5-4.5V ratiometric
  • 316L SS (Hastelloy C276 available on request) probe and thread area with stainless steel housing
  • Choice of process connections 1/2" NPT male, 1/4" NPT male, 7/16-20 UNF male or G1/4 male

Potential applications for the Core CS20 series include:

  • Gearbox lubrication systems
  • Hydraulic oil fluid
  • Gas Flow
  • Water and chemical storage

Please see the below performance and thermal tables for the Core CS20 series:

Core CS20 Specifications

* Accuracy includes non-linearity, hysteresis and non-repeatability
**IP rating is dependent on electrical termination selection. Contact factory for more information.

£0.00 Ex Tax: £0.00

Cynergy3 ITT Series

The ITT series of programmable temperature probes utilise K or J thermocouple or a PT100 RTD sensor and a 6mm stainless steel sheath for efficient temperature measurement (accuracy of 0.1% for RTD and 0.2% for thermocouple), delivered via programmable 4-20mA transmitter output. The probe comes pre-programmed for easy setup, but the can be configured to any temperature range within the probe's capability using the software provided.

  • Programmable temperature probes
  • Available with J type thermocouple (0-1200°C range), K type thermocouple (0-1350°C range) or PT100 RTD sensor (-200-850°C range)
  • 6mm stainless steel sheath available in various lengths
  • Robust aluminium head
  • Output via 4-20mA transmitter, programable to any temperature range within the probe's capabilities (software available to download from Technical Library)
  • Operating temperature range (ambient) of -20°C to 50°C
  • Accuracy of 0.1% overall for RTD and 0.2% for thermocouple
  • Process connection via 1/4" BSP male
  • Can be used with any standard 6mm compression fittings

The ITT series of pressure transducers is available with a variety of accessories such as plastic and metal cable glands, compression fittings or stainless steel pockets - speak to our technical sales team to discuss your requirement.

The below table gives the full specifications for each resistor model available including the Cynergy3 ITT series:

Cynergy3 ITT series specifications

£0.00 Ex Tax: £0.00

Cynergy3 ITTU Series

The ITTU series of programmable temperature probes utilise K or J thermocouple or a PT100 RTD sensor and a 6mm stainless steel sheath for efficient temperature measurement (accuracy of 0.1% for RTD and 0.2% for thermocouple), delivered via programmable 4-20mA transmitter output. The probe comes pre-programmed for easy setup, but the can be configured to any temperature range within the probe's capability using the software provided.

  • Programmable temperature probes
  • Available with J type thermocouple (0-1200°C range), K type thermocouple (0-1350°C range) or PT100 RTD sensor (-200-850°C range)
  • 6mm stainless steel sheath available in various lengths
  • Robust aluminium head
  • Output via 4-20mA transmitter, programable to any temperature range within the probe's capabilities (software available to download from Technical Library)
  • Operating temperature range (ambient) of -20°C to 50°C
  • Accuracy of 0.1% overall for RTD and 0.2% for thermocouple
  • Process connection via 1/4" NPT
  • Can be used with any standard 6mm compression fittings

The ITTU series of pressure transducers is available with a variety of accessories such as plastic and metal cable glands, compression fittings or stainless steel pockets - speak to our technical sales team to discuss your requirement.

The below table gives the full specifications for each resistor model available including the Cynergy3 ITTU series:

Cynergy3 ITT series specifications

£0.00 Ex Tax: £0.00

Cynergy3 IWTT Series

The IWTT series of wireless industrial temperature transducers from Cynergy3 utilises J or K type thermocouples or PT100 RTD sensor to offer an excellent cost effective alternative to traditional wired transducers in inaccessible or expensive installation environments. The sensors feature accuracy as low as <±0.1% of the full scale, temperature coefficient of ±500ppm/°C and up to 750m line-of-sight range. The IWTT series' user-selectable features include transmission update rates, output (4-20mA or 1-5V), and configuration (single or 5 channel; depending on receiver used). The IWTT series is designed to be paired with one of the IWR family of wireless receivers for simple plug-and-play temperature measurement solution; a compression fitting is available to allow easy alignment of the head with the receiver. The sensors are housed within an acetal body, making them suitable to use in harsh environments. Each device comes temperature compensated, calibrated and fully traceable.

  • Industrial wireless temperature transducers
  • Selection of type J-type thermocouple (0-1200°C range), K-type thermocouple (0-1350°C range) or PT100 RTD sensor (-200 - +800°C range)
  • Acetal housing suitable for use in harsh environments
  • Accuracy <±0.1% of the full scale (non-linearity and hysteresis)
  • Operating temperature range (ambient temperature) of -20°C to 50°C
  • Battery life up to 5 years with 10s update rate
  • Process connection via 1/4" BSP male

The IWTT series of temperature transducers is available in a range of input and sheath length options. Further customisation is available on this product - speak to our technical sales team to discuss your requirement.

Typical applications for the Cynergy3 IWTT pressure transducer series include:

  • Simple cable replacement installation - dispense with expensive cable runs
  • Environmental monitoring - pumping stations, sewage plants, water treatment etc.
  • Facilities management - boiler rooms, plant hydraulics, plant pneumatics
  • Asset monitoring - tank farms, process plants, HVAC and building management
  • Service contract - temporary installation for servicing and field trials

The below table gives the full specifications for each resistor model available including the Cynergy3 IWTT series:

Cynergy3 IWTT series specifications

£0.00 Ex Tax: £0.00

Cynergy3 IWTTU Series

The IWTTU series of wireless industrial temperature transducers from Cynergy3 utilises J or K type thermocouples or PT100 RTD sensor to offer an excellent cost-effective alternative to traditional wired transducers in inaccessible or expensive installation environments. The sensors feature accuracy as low as <±0.1% of the full scale, temperature coefficient of ±500ppm/°C and up to 750m line-of-sight range. The IWTTU series' user-selectable features include transmission update rates, output (4-20mA or 1-5V), and configuration (single or 5 channel; depending on receiver used). The IWTTU series is designed to be paired with one of the IWR family of wireless receivers for simple plug-and-play temperature measurement solution; a compression fitting is available to allow easy alignment of the head with the receiver. The sensors are housed within an acetal body, making them suitable to use in harsh environments. Each device comes temperature compensated, calibrated and fully traceable.

  • Industrial wireless temperature transducers
  • Selection of type J-type thermocouple (0-1200°C range), K-type thermocouple (0-1350°C range) or PT100 RTD sensor (-200 - +800°C range)
  • Acetal housing suitable for use in harsh environments
  • Accuracy <±0.1% of the full scale (non-linearity and hysteresis)
  • Operating temperature range (ambient temperature) of -20°C to 50°C
  • Battery life up to 5 years with 10s update rate
  • Process connection via 1/4" NPT male

The IWTTU series of temperature transducers is available in a range of input and sheath length options. Further customisation is available on this product - speak to our technical sales team to discuss your requirement.

Typical applications for the Cynergy3 IWTTU pressure transducer series include:

  • Simple cable replacement installation - dispense with expensive cable runs
  • Environmental monitoring - pumping stations, sewage plants, water treatment etc.
  • Facilities management - boiler rooms, plant hydraulics, plant pneumatics
  • Asset monitoring - tank farms, process plants, HVAC and building management
  • Service contract - temporary installation for servicing and field trials

The below table gives the full specifications for each resistor model available including the Cynergy3 IWTTU series:

Cynergy3 IWTTU series specifications

£0.00 Ex Tax: £0.00