Telephone +44 (0) 1342 330 470

Monday to Thursday: 08.30 to 17.00 (GMT)
Friday: 08.30 to 12.45 (GMT)

PRODUCT SEARCH
Portal

Thermocouples & probe assemblies



13 Item(s)

per page

Set Descending Direction
  1. 2672x Series Bead Welded Thermocouple

    2672x Series Bead Welded Thermocouple

    These thermocouples are easily mounted on most surfaces, and can be used for a wide variety of surface temperature measurements including environmental testing, temperature surveys of electronic components and oven wall temperature. They can be used with standard readout instruments.

    • -160°C to 370°C temperature range (type T).
    • 25mS response time.
    • Rugged 30AWG flexible TC wire with fibreglass insulation construction.
    • Very low thermal mass.
    More Info
  2. RPL1-T Thermocouple probe assembly

    RPL1-T Thermocouple probe assembly

    The RPL1-T sensor is designed for a wide range of general purpose industrial applications that require a flying lead sensor. The unit is ideal for use with compression fittings or the RPL50-TW pocket. UKAS traceable calibration is available upon request.

    • -50°C to 250°C operating temperature range
    • K type thermocouple
    • UKAS traceable calibration
    • Can be used with compression fittings or pockets
    More Info
  3. RPL2-T Thermocouple probe assembly with process thread

    RPL2-T Thermocouple probe assembly with process thread

    The RPL2-T sensor is designed for a wide range of general purpose industrial applications that require a flying lead sensor. This device has a welded process connection to simplify installation. UKAS traceable calibration is available upon request.

    • -50°C to 250°C operating temperature range
    • K type thermocouple
    • UKAS traceable calibration
    More Info
  4. Thermocouple air temperature sensor RPL9-T

    Thermocouple air temperature sensor RPL9-T

    The housing allows us to fit either a simple sensor or we can include a transmitter with either 4-20mA or 0-10V output and a wide range of sensor type are availableoffering a variety of accuracies.

    • Type J, K or T thermocouple.
    • -40 to +85°C
    • Simplex or duplex
    • Class 1 or Class 2 tolerance band
    More Info
  5. Thermocouple exterior air temperature sensor RPL10-T

    Thermocouple exterior air temperature sensor RPL10-T

    The sensor is fitted with a variety of surface mounting terminal housing rated at least IP66 in which we can fit either a terminal block or transmitter.

    • Type J, K or T thermocouple.
    • -40 to +85°C
    • Simplex or duplex
    • Class 1 or Class 2 tolerance band
    More Info
  6. Thermocouple K, E & T type  butt bonded 20100 series

    Thermocouple K, E & T type butt bonded 20100 series

    These thermocouples have their free filiament supported on a polyimide film carrier, which can cut away during installation if not needed.

    • -160°C to 815°C temperature range
    • 1mS response time (grounded)
    • Low mass giving low thermal inertia
    • Flexible will bond to flat or curved surfaces
    More Info
  7. Thermocouple with lead Mineral insulated RPL13-T

    Thermocouple with lead Mineral insulated RPL13-T

    The sensor can also be made in almost any length that may be required. Various common options are shown on this data sheet but this is not an exhaustive list, please contact us with your requirements. UKAS or traceable calibration is available upon request.

    • Type J, K or T thermocouple.
    • Up to +800°C
    • Simplex or duplex
    • Class 1 or Class 2 tolerance band
    More Info
  8. Thermocouple with process thread & extension  RPL5-T

    Thermocouple with process thread & extension RPL5-T

    The lagging extension allows the terminal head to be mounted away from the process in order to protect any electronics housed within it or to allow the head to sit above any insulation. We can manufacture the sensor stem to your own diameter and length requirements and we have plenty of options available for the sensor and terminal head.

    • Type J, K or T thermocouple.
    • -50 to +250°C
    • Simplex or duplex
    • Class 1 or Class 2 tolerance band
    More Info
  9. Thermocouple with process thread RPL4-T

    Thermocouple with process thread RPL4-T

    The sensor is useful where there are space constraints and where a lagging extension is impractical. We can manufacture the sensor stem to your own diameter and length requirements and we have plenty of options available for the sensor and terminal head.

    • Type J, K or T thermocouple.
    • -50 to +250°C
    • Simplex or duplex
    • Class 1 or Class 2 tolerance band
    More Info
  10. Thermocouple with RJT process connection RPL7-T

    Thermocouple with RJT process connection RPL7-T

    The sensor stem can be manufactured in various diameters and lengths to meet your exact requirements and with various options available for the terminal head, including IP68 stainless steel versions, we are sure to satisfy all of your requirements. All welds are carefully performed to ensure they are continuous and crevice free.

    • Type J, K or T thermocouple.
    • -50 to +250°C
    • Simplex or duplex
    • Class 1 or Class 2 tolerance band
    More Info
  11. Thermocouple with terminal head Mineral insulated RPL15-T

    Thermocouple with terminal head Mineral insulated RPL15-T

    Various common options are shown on this data sheet but this is not an exhaustive list, please contact us with your requirements. UKAS or traceable calibration is available upon request..

    • Type J, K, T or N thermocouple.
    • Up to +1250°C
    • Simplex or duplex
    • Class 1 or Class 2 tolerance band
    More Info
  12. Thermocouple with terminal head RPL3-T

    Thermocouple with terminal head RPL3-T

    Various common options are shown on this data sheet but this is not an exhaustive list, please contact us with your requirements. Full details of the head types and accessories are available in the appropriate data sheet. UKAS or traceable calibration is available upon request.

    • Type J, K or T thermocouple.
    • -50 to +250°C
    • Simplex or duplex
    • Class 1 or Class 2 tolerance band
    More Info
  13. Thermocouple with Tri-Clamp process connection RPL6-T

    Thermocouple with Tri-Clamp process connection RPL6-T

    The sensor stem can be manufactured in various diameters and lengths to meet your exact requirements and with various options available for the terminal head, including IP68 stainless steel versions, we are sure to satisfy all of your requirements. All welds are carefully performed to ensure they are continuous and crevice free.

    • Type J, K or T thermocouple.
    • -50 to +250°C
    • Simplex or duplex
    • Class 1 or Class 2 tolerance band
    More Info

13 Item(s)

per page

Set Descending Direction