Shop

  • SRT Microcéramique
  • NP0 (C0G) Chip ceramic capacitor with negative TC
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor under 10.10-4 at 1Vrms and 1kH (or 1MHz)
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E
  • Exempt
  • SRT Microcéramique
  • MLCC Capacitor for RF and Microwave communication
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor under 5.10-4 at 1Vrms and 1MHz for values ≤ 1000pF and under 5.10-4 at 1Vrms and 1KHz for values > 1000pF
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E
  • Exempt
  • SRT Microcéramique
  • High Temperature, ultra stable MLCC Capacitor
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E
  • Exempt
  • SRT Microcéramique
  • High Temperature MLCC Capacitor
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor up to 0.025
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E
  • Exempt
  • SRT Microcéramique
  • Low inductance capacitors for high energy transfer
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor under 2.5% at 1KHz
  • Insulation resistance of 20°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less
  • Exempt
  • SRT Microcéramique
  • Stable ceramic capacitor
  • Better voltage behaviour compared to X7R dielectric
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E
  • Exempt
  • SRT Microcéramique
  • Ultra stable ceramic capacitor
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E
  • Exempt
  • SRT Microcéramique
  • Stable ceramic capacitor
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E
  • Exempt
  • SRT Microcéramique
  • Non magnetic NP0 (Type 1) MLCC Capacitors
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E
  • Exempt
  • SRT Microcéramique
  • Non magnetic X7R (Type 2) MLCC Capacitors
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor maximum of 2.5% at 1Vrms and 1kHz for Un between 16V and 25V and maximum 1% at 1Vrms and 1kHz for Un between 25V and 50V
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E
  • Exempt
  • SRT Microcéramique
  • Ultra stable ceramic capacitor
  • Highest quality and reliability, suitable for safety-critical medical applications
  • Dissipation factor maximum of 0.1% at 1Vrms and 1kHz (values under 1nF measured at 1MHz)
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric withstanding voltage of 250% of rated voltage for 5s + 1s, 50mA maximum
  • Exempt
  • SRT Microcéramique
  • Radial dipped NP0 capacitor series
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor up to 0.025
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E
  • Exempt
  • SRT Microcéramique
  • Radial dipped X7R capacitor series
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor up to 0.025 at 1Vrms and 1kHz (or 1MHz)
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E
  • Exempt
  • SRT Microcéramique
  • NP0 high capacitance value capacitor stacks, ideal for SMPS applications
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor 10.10-4 maximum
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less
  • Dielectric withstanding voltage of 2.5Un for 5s with 50mA maximum charging current
  • Exempt
  • SRT Microcéramique
  • X7R high capacitance value capacitor stacks, ideal for SMPS applications
  • Highest quality and reliability, suitable for safety-critical industries
  • Maximum dissipation factor of 2.5% at 1Vrms, 1kHz, 25°C
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less
  • Dielectric withstanding voltage of 2.5Un for 5s with 50mA maximum charging current
  • Exempt
  • SRT Microcéramique
  • Ceramic chip ceramic capacitor
  • Highest quality and reliability, suitable for safety-critical medical applications
  • Dissipation factor maximum of 2.5% (except for 25V models with 3.5% maximum)
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric withstanding voltage of 250% of rated voltage for 5s + 1s, 50mA maximum
  • Exempt

Manufacturers

Looking for Shop?

Looking for Capacitors?

The below manufacturers are all of our authorised partners that produce Shop or related products.

Shop

This is where you can browse products in this store.