- PCB terminal connector with 2 row female plug
- Rated current for minimum number of poles 13.4A (IEC) and 9.5A (UL)
- Dimensions of L1 3.5mm to 76.5mm (depending on the number of poles required)
- Push in spring connection with integrated push buttons for opening the terminal point
- Clamping range from 0.14mm² to 1.5mm²
- Temperature range −50°C up to +120°C
- CSA and UL 1059 approved, IEC listed
- Female plug in connector
- Rated current for minimum number of poles 17A (IEC) and 10A (UL)
- Dimensions of L1 3.5mm to 80.5mm (depending on the number of poles required)
- Clamping yoke screw connection
- Clamping range from 0.08mm² to 1.5mm²
- Wire connection cross section from AWG 28 to AWG 14
- Temperature range −50°C up to +100°C
- CSA and UL 1059 approved, IEC listed
- PCB terminal connector with female plug
- Rated current for minimum number of poles 6A (IEC) and 5A (UL)
- Dimensions of L1 2.5mm to 27.5mm (depending on the number of poles required)
- Push in spring connection with integrated push buttons for opening the terminal point
- Wire connection cross section from AWG28 (0.08mm²) to AWG 20 (0.5mm²)
- Temperature range −40°C up to +105°C
- CSA and UL 1059 approved, IEC listed
- Female plug in connector
- Rated current for minimum number of poles 17.5A (IEC) and 10A (UL)
- Dimensions of L1 3.5mm to 80.5mm (depending on the number of poles required)
- Push in spring connection
- Clamping range from 0.14mm² to 1.5mm²
- Wire connection cross section from AWG 26 to AWG 16
- Temperature range −50°C up to +120°C
- CSA and UL 1059 approved, IEC listed
- High current female plug in connector
- Rated current for minimum number of poles 24A (IEC) and 18.5A (UL)
- Dimensions of L1 5.08mm to 116.84mm (depending on the number of poles required)
- Clamping range from 0.13mm² to 3.31mm²
- Wire connection cross section from AWG 26 to AWG 12
- Temperature range −50°C up to +100°C
- CSA and UL 1059 approved, IEC listed
- High current female plug in connector
- Rated current for minimum number of poles 23A (IEC) and 20A (UL)
- Dimensions of L1 5.08mm to 116.84mm (depending on the number of poles required)
- Clamping yoke screw connection
- Clamping range from 0.13mm² to 4mm²
- Wire connection cross section from AWG 30 to AWG 12
- Temperature range −50°C up to +100°C
- CSA and UL 1059 approved, IEC listed
- PCB terminal connector
- Rated current for minimum number of poles 16A (IEC) and 10A (UL)
- Dimensions of L1 3.5mm to 5mm (depending on the number of poles required)
- SMT solder connection with a solder pin length of 3.2mm
- Wire connection cross section from AWG 28 to AWG 14
- Temperature range of −50°C to +120°C
- CSA and UL 1059 approved, IEC listed
- PCB terminal connector
- Rated current for minimum number of poles 17.5A (IEC) and 15A (UL)
- Dimensions of L1 5.08mm to 119.84mm (depending on the number of poles required)
- SMT solder connection with a solder pin length of 3.5mm
- Wire connection cross section from AWG 24 to AWG 14
- Temperature range of −50°C to +120°C
- CSA and UL 1059 approved, IEC listed
- PCB terminal connector
- Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
- Dimensions of L1 3.5mm to 38.5mm (depending on the number of poles required)
- SMD solder connection
- Wire connection cross section from AWG 28 to AWG 14
- Temperature range of −50°C to +120°C
- CSA and UL 1059 approved, IEC listed
- PCB terminal connector
- Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
- Dimensions of L1 3.5mm to 38.5mm (depending on the number of poles required)
- SMD solder connection
- Wire connection cross section from AWG 28 to AWG 14
- Temperature range of −50°C to +120°C
- CSA and UL 1059 approved, IEC listed
- PCB terminal connector
- Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
- Dimensions of L1 5mm to 35mm (depending on the number of poles required)
- SMD solder connection
- Wire connection cross section from AWG 28 to AWG 14
- Temperature range of −50°C to +120°C
- CSA and UL 1059 approved, IEC listed
- PCB terminal connector
- Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
- Dimensions of L1 5mm to 35mm (depending on the number of poles required)
- SMD solder connection
- Wire connection cross section from AWG 28 to AWG 14
- Temperature range of −50°C to +120°C
- CSA and UL 1059 approved, IEC listed
- PCB terminal connector
- Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
- Dimensions of L1 7.5mm to 37.5mm (depending on the number of poles required)
- SMD solder connection
- Wire connection cross section from AWG 28 to AWG 14
- Temperature range of −50°C to +120°C
- CSA and UL 1059 approved, IEC listed
- PCB terminal connector
- Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
- Dimensions of L1 7.5mm to 37.5mm (depending on the number of poles required)
- SMD solder connection
- Wire connection cross section from AWG 28 to AWG 14
- Temperature range of −50°C to +120°C
- CSA and UL 1059 approved, IEC listed
- PCB terminal connector
- Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
- Dimensions of L1 3.5mm to 80.5mm (depending on the number of poles required)
- SMT solder connection with a solder pin length of 3.5mm
- Wire connection cross section from AWG 28 to AWG 14
- Temperature range of −50°C to +120°C
- CSA and UL 1059 approved, IEC listed
- PCB terminal connector
- Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
- Dimensions of L1 3.5mm to 80.5mm (depending on the number of poles required)
- SMT solder connection with a solder pin length of 3.5mm
- Wire connection cross section from AWG 28 to AWG 14
- Temperature range of −50°C to +120°C
- CSA and UL 1059 approved, IEC listed
Calculators and Converters
Work out what you need for your project. Go to calculators and convertors