Exclusive Partner

About Shop

This is where you can browse products in this store.

  • RARA
  • Metal clad thick film resistor
  • Resistance range from 1kΩ to 2MΩ
  • Max power rating of 15W
  • Cement moulding within aluminium housing
  • Short time overload of 2 x power rating is 5 seconds
  • High stability at conventional power ratings
  • Temperature range of -55°C up to +250°C
  • Compliant
  • RARA
  • Metal clad thick film resistor
  • Resistance range from 1kΩ to 2MΩ
  • Max power rating of 25W
  • Cement moulding within aluminium housing
  • Short time overload of 2 x power rating is 5 seconds
  • High stability at conventional power ratings
  • Temperature range of -55°C up to +250°C
  • Compliant
  • RARA
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 1.1kΩ
  • Power rating of 100W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series
  • Compliant
  • RARA
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 1.75kΩ
  • Power rating of 150W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series
  • Compliant
  • RARA
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 2.2kΩ
  • Power rating of 200W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series
  • Compliant
  • RARA
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 2.79kΩ
  • Power rating of 250W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series
  • Compliant
  • RARA
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 3.5kΩ
  • Power rating of 300W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series
  • Compliant
  • RARA
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 4.45kΩ
  • Power rating of 400W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series
  • Compliant
  • RARA
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 5.78kΩ
  • Power rating of 500W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series
  • Compliant
  • RARA
  • Flat and narrow type metal clad wire wound resistor
  • Cement or silicone filling material with an extruded aluminium housing
  • 300mm flying leads
  • Excellent heat dissipation
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C (cement) / +150°C (silicone)
  • Short time overload of 5 x power rating is 5 seconds
  • Compliant
  • RARA
  • Flat and narrow type metal clad wire wound resistor
  • Cement or silicone filling material with an extruded aluminium housing
  • 300mm flying leads
  • Excellent heat dissipation
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C (cement) / +150°C (silicone)
  • Short time overload of 5 x power rating is 5 seconds
  • Compliant
  • RARA
  • Flat and narrow type metal clad wire wound resistor
  • Cement or silicone filling material with an extruded aluminium housing
  • 300mm flying leads
  • Excellent heat dissipation
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C (cement) / +150°C (silicone)
  • Short time overload of 5 x power rating is 5 seconds
  • Compliant
  • RARA
  • Metal clad wire wound resistor
  • Resistance range between 0.27Ω and 25kΩ
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +250°C
  • Cement moulding within aluminium housing
  • Short time overload of 5 x power rating is 5 seconds
  • Mounts on chassis to utilise heat sink effect
  • Compliant
  • RARA
  • Metal clad wire wound resistor
  • Resistance range between 0.1Ω and 10kΩ
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +250°C
  • Cement moulding within aluminium housing
  • Short time overload of 5 x power rating is 5 seconds
  • Mounts on chassis to utilise heat sink effect
  • Compliant
  • RARA
  • Metal clad wire wound resistor
  • Resistance range between 0.68Ω and 50kΩ
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +250°C
  • Cement moulding within aluminium housing
  • Short time overload of 5 x power rating is 5 seconds
  • Mounts on chassis to utilise heat sink effect
  • Compliant
  • RARA
  • Metal clad wire wound resistor
  • Resistance range between 0.2Ω and 20kΩ
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +250°C
  • Cement moulding within aluminium housing
  • Short time overload of 5 x power rating is 5 seconds
  • Mounts on chassis to utilise heat sink effect
  • Compliant
Calculators and Converters

Work out what you need for your project. Go to calculators and convertors