±20% series

  • SRT Microcéramique
  • Ultra stable ceramic capacitor
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E
  • SRT Microcéramique
  • Stable ceramic capacitor
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E
  • SRT Microcéramique
  • Non magnetic NP0 (Type 1) MLCC Capacitors
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E
  • SRT Microcéramique
  • Non magnetic X7R (Type 2) MLCC Capacitors
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor maximum of 2.5% at 1Vrms and 1kHz for Un between 16V and 25V and maximum 1% at 1Vrms and 1kHz for Un between 25V and 50V
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E
  • SRT Microcéramique
  • Radial dipped X7R capacitor series
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor up to 0.025 at 1Vrms and 1kHz (or 1MHz)
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test of 1.5Un + 100V for 5 seconds with 50mA maximum charging current
  • SRT Microcéramique
  • Radial dipped X7R capacitor series
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor up to 0.025
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E
  • SRT Microcéramique
  • Radial moulded capacitor series for military applications
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor up to 0.025 at 1Vrms and 1kHz
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Climatic Category 55/125/56
  • SRT Microcéramique
  • Radial moulded capacitor series for military applications
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor up to 0.025 at 1Vrms and 1kHz
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Climatic category: 55/125/56
  • Susumu
  • Surface-mount thin film trimmable chip resistor
  • Temperature range of −55°C to +125°C
  • Maximum voltage of 25V
  • AEC-Q200 compliant.
  • Susumu
  • Surface-mount thin film trimmable chip resistor
  • Temperature range of −55°C to +125°C
  • Maximum voltage of 15V
  • AEC-Q200 compliant
  • Susumu
  • Surface-mount thin film trimmable chip resistor
  • Temperature range of −55°C to +125°C
  • Maximum voltage of 75V
  • AEC-Q200 compliant
  • Susumu
  • Surface-mount thin film trimmable chip resistor
  • Temperature range of −55°C to +125°C
  • Maximum voltage of 100V
  • AEC-Q200 compliant
Please be advised that due to the ongoing supply issues with raw materials affecting the global electronics industry, as well as an increase in orders received by our manufacturing partners, a large number of products are facing increased lead times in recent months. For the latest lead time and stock availability, please contact one of our engineers who will be happy to discuss lead times further and the potential for alternative parts.