Motion Control

Isabellenhütte’s innovative solution for battery management system applications – the IsaSCALE IVT-S is a plug-and-play module for precise current and voltage measurement in package fitting into palm of your hand.

Magnetic sensors, digital isolators and low power switch sensors based on spintronic GMR (Giant Magnetoresistance) technology from NVE Corporation, including high temperature models.

Metal clad thick film and wirewould resistors from RARA, including inductive and non-inductive designs, braking resistors.

Range of short- and long sided thin film terminals from Susumu, including models with high power handling capacity, models suppressing the surface temperature and others.

RARA ULV200

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium vertical housing
  • UL approved
  • Short time overload of 10 x power rating is 5 seconds

RARA ULV300

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium vertical housing
  • UL approved
  • Short time overload of 10 x power rating is 5 seconds

RARA ULV400

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium vertical housing
  • UL approved
  • Short time overload of 10 x power rating is 5 seconds

RARA ULV500

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium vertical housing
  • UL approved
  • Short time overload of 10 x power rating is 5 seconds

RARA ULV60

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium vertical housing
  • UL approved
  • Short time overload of 5 x power rating is 5 seconds

RARA ULV600

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Rated power 600W(Heatsink) / 330W (In air)
  • UL approved
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Option of flying leads, parallel or series connections

RARA ULV80

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium vertical housing
  • UL approved
  • Short time overload of 10 x power rating is 5 seconds

RARA ULV800

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads, parallel or series connections
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • UL approved
  • Cement moulding with an extruded aluminium housing
  • Short time overload of 10 x power rating is 5 seconds

SMP152

N-Channel JFET
InterFET SMP152 N-Channel JFET with N0132L Geometry. Typical leakage of -4pA and a low input capacitance of 15pF (max). All of this in a SOT-23 package.

SMP3971

N-Channel JFET
InterFET SMP3971 N-Channel JFET with N0132S Geometry. Typical leakage of -4pA and a low input capacitance of 25pF (max). All of this in a SOT-23 package.

SMP4092

N-Channel JFET
InterFET SMP4092 N-Channel JFET with N0132S Geometry. Typical leakage of -4pA and a low input capacitance of 16pF (max). All of this in a SOT-23 package.

SMP4117

N-Channel JFET
InterFET SMP4117 N-Channel JFET with N0001H Geometry. Typical leakage of -1pA and a low input capacitance of 3pF (max). All of this in a SOT-23 package.

SMP4117A

N-Channel JFET
InterFET SMP4117A N-Channel JFET with N0001H Geometry. Maximum leakage of -1pA and a low input capacitance of 3pF (max). All of this in a SOT-23 package.

SMP4118

N-Channel JFET
InterFET SMP4118 N-Channel JFET with N0001H Geometry. Typical leakage of -1pA and a low input capacitance of 3pF (max). All of this in a SOT-23 package.

SMP4118A

N-Channel JFET
InterFET SMP4118A N-Channel JFET with N0001H Geometry. Maximum leakage of -1pA and a low input capacitance of 3pF (max). All of this in a SOT-23 package.

SMP4220

N-Channel JFET
InterFET SMP4220 N-Channel JFET with N0016H Geometry. Typical leakage of -1.5pA and a low input capacitance of 6pF (max). All of this in a SOT-23 package.

Resources

Related Articles