Automotive Industry

Thanks to our portfolio of industry-leading manufacturers, we are able to offer a wide selection of AEC-Q200 compliant resistors as well as some AEC-Q100 qualified sensors.

Our resistor range developed for automotive applications such as electric vehicle charging and battery management systems includes a selection of high-quality current sensing resistors and shunts by Isabellenhütte in addition to a variety of thin-film and metal-foil chip resistors by Susumu which are compliant to the automotive AEC-Q200 standard.

We also offer a range of sensor products meeting AEC-Q100 qualifications including foil thermocouple temperature sensors by RdF, pressure sensors by Merit Sensor, load cells from Stellar Technology and NVE’s smart magnetometer based on their TMR technology.

The IVT-S module from Isabellenhütte, is an innovative solution for battery management system applications. This plug-and-play sensor is ideal for precise current and voltage measurement and is widely used within the automotive industry.

  • Cissoid
  • High temperature voltage reference
  • Maximum output current of 3mA at +225°C
  • Quiescent current of 700µA
  • Validated at +225°C for 30,000 hours
  • High temperature voltage reference
  • Maximum output current of 3mA at +225°C
  • Quiescent current of 700µA
  • Validated at +225°C for 30,000 hours
  • Cissoid
  • High temperature, negative low-dropout linear voltage regulator
  • Maximum output current of 1A at +225°C
  • Quiescent current of 3mA
  • Validated at +225°C for 30,000 hours (and still on-going)
  • High temperature, negative low-dropout linear voltage regulator
  • Maximum output current of 1A at +225°C
  • Quiescent current of 3mA
  • Validated at +225°C for 30,000 hours (and still on-going)
  • Cissoid
  • High temperature low-dropout linear voltage regulator
  • Maximum output current of 1A at +225°C
  • Quiescent current of 3mA
  • Validated at +225°C for 43,800 hours (and still on-going)
  • High temperature low-dropout linear voltage regulator
  • Maximum output current of 1A at +225°C
  • Quiescent current of 3mA
  • Validated at +225°C for 43,800 hours (and still on-going)
  • Cissoid
  • High temperature logic gates
  • Exceeds AEC-Q100 Grade 0 requirements (qualification pending)
  • 16mA output drive current
  • EDS: 2000V HBM or 200V MM
  • CMOS Low power consumption
  • High temperature logic gates
  • Exceeds AEC-Q100 Grade 0 requirements (qualification pending)
  • 16mA output drive current
  • EDS: 2000V HBM or 200V MM
  • CMOS Low power consumption
  • Cissoid
  • High temperature adjustable linear voltage regulator
  • Exceeds AEC-Q100 Grade 0 requirements (qualification pending)
  • Quiescent current of 1.1mA
  • Chip-enable input signal allowing to place the circuit in low power, disable mode
  • High temperature adjustable linear voltage regulator
  • Exceeds AEC-Q100 Grade 0 requirements (qualification pending)
  • Quiescent current of 1.1mA
  • Chip-enable input signal allowing to place the circuit in low power, disable mode
  • Core Sensors
  • Submersible pressure transducer
  • Pressure ranges from 1 PSI to 100 PSI
  • 316L & 304SS construction
  • Temperature range −40°C to +85°C
  • Accuracy down to ≤ ±0.25% BFSL
  • ETFE cable jacket with wide diameter vent tube
  • Ideal for liquid level measurement
  • Compliant
  • Submersible pressure transducer
  • Pressure ranges from 1 PSI to 100 PSI
  • 316L & 304SS construction
  • Temperature range −40°C to +85°C
  • Accuracy down to ≤ ±0.25% BFSL
  • ETFE cable jacket with wide diameter vent tube
  • Ideal for liquid level measurement