![Rhopoint Components Logo Blue/Black (smaller version) [SVG]](https://www.rhopointcomponents.com/wp-content/uploads/2020/09/RC-logo-master.svg){kind=logo}
Renewables
We have designed various sensors and components for some of the largest renewable energy companies around as well as also helped with small startup companies investigating Wind, Wave and Tidal renewable projects. Whether you need a sensor to monitor hydraulic spikes or a braking resistor to help with turbine dumped energy, we are here to help.
- Metal clad wire wound resistor
- Option of flying leads (tab terminals are standard)
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Extruded aluminium vertical housing
- Short time overload of 10 x power rating is 5 seconds
- Metal clad wire wound resistor
- Option of flying leads (tab terminals are standard)
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Extruded aluminium vertical housing
- Short time overload of 10 x power rating is 5 seconds
- Metal clad wire wound resistor
- Option of flying leads (tab terminals are standard)
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Extruded aluminium vertical housing
- Short time overload of 10 x power rating is 5 seconds
- Metal clad wire wound resistor
- Option of flying leads (tab terminals are standard)
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Extruded aluminium vertical housing
- Short time overload of 10 x power rating is 5 seconds
- Metal clad wire wound resistor
- Option of flying leads (tab terminals are standard)
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Extruded aluminium vertical housing
- Short time overload of 10 x power rating is 5 seconds
- Metal clad wire wound resistor
- Option of flying leads, parallel or series connections
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Cement moulding with an extruded aluminium housing
- Short time overload of 10 x power rating is 5 seconds
- Metal clad wire wound resistor
- Option of flying leads, parallel or series connections
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Cement moulding with an extruded aluminium housing
- Short time overload of 10 x power rating is 5 seconds
- Metal clad wire wound resistor
- Option of flying leads, parallel or series connections
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Cement moulding with an extruded aluminium housing
- Short time overload of 10 x power rating is 5 seconds
- Metal clad wire wound resistor
- Option of flying leads, parallel or series connections
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Cement moulding with an extruded aluminium housing
- Short time overload of 10 x power rating is 5 seconds
- Metal clad wire wound resistor
- Resistance range between 0.1Ω and 10kΩ
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +250°C
- Cement moulding within aluminium housing
- Short time overload of 5 x power rating is 5 seconds
- Mounts on chassis to utilise heat sink effect
- Flat type metal clad wire wound resistor
- Resistance options from 1Ω up to 1.1kΩ
- Power rating of 100W (on a heat sink)
- Tolerance options between ±0.5% and ±10.0%
- TCR of +260 ppm/°C maximum
- For Non UL Approval see the IRF Series
- Flat type metal clad wire wound resistor
- Resistance options from 1Ω up to 1.75kΩ
- Power rating of 150W (on a heat sink)
- Tolerance options between ±0.5% and ±10.0%
- TCR of +260 ppm/°C maximum
- For Non UL Approval see the IRF Series
- Flat type metal clad wire wound resistor
- Resistance options from 1Ω up to 2.2kΩ
- Power rating of 200W (on a heat sink)
- Tolerance options between ±0.5% and ±10.0%
- TCR of +260 ppm/°C maximum
- For Non UL Approval see the IRF Series
- Flat type metal clad wire wound resistor
- Resistance options from 1Ω up to 2.79kΩ
- Power rating of 250W (on a heat sink)
- Tolerance options between ±0.5% and ±10.0%
- TCR of +260 ppm/°C maximum
- For Non UL Approval see the IRF Series
- Flat type metal clad wire wound resistor
- Resistance options from 1Ω up to 3.5kΩ
- Power rating of 300W (on a heat sink)
- Tolerance options between ±0.5% and ±10.0%
- TCR of +260 ppm/°C maximum
- For Non UL Approval see the IRF Series
- Flat type metal clad wire wound resistor
- Resistance options from 1Ω up to 3.08kΩ
- Power rating of 400W (on a heat sink)
- Tolerance options between ±0.5% and ±10.0%
- TCR of +260 ppm/°C maximum
- For Non UL Approval see the IRF Series
