Military & Defence

Selection of ‘EEE’ approved surface-mount current sensing resistors by Isabellenhütte and ultra-precision resistors from Vishay Foil Resistors
Selection of Military grade surface mount, high voltage chip resistors from Ohmcraft.

Cissoid’s range of semiconductors designed especially for high temperature applications and harsh environments.

‘EEE’ approved pressure sensors from Emerson Paine™.

Robust and accurate general purpose load cells from Lord Sensing Stellar Technology.

Thermocouple foil temperature sensors by RdF.

Isabellenhütte 25005/VMP (2010)

DLA | Precision Current Sense Resistor

DLA-qualified precision current sense resistor
Constant current up to 17A (5mOhm)
Resistance range from 0.005Ω to 1Ω
Tolerance of ±0.5% or ±1%
Two-terminal configuration
Power rating up to 1.5W (at +70°C)
Temperature range from -65°C to +170°C

Isabellenhütte 25006/VMS (2512)

DLA | Precision Current Sense Resistor

DLA-qualified precision current sense resistor
Constant current up to 20A (5mOhm)
Resistance range from 0.005Ω to 1Ω
Tolerance of ±0.5% or ±1%
Two-terminal configuration
Power rating up to 2W (at +70°C)
Temperature range from -65°C to +170°C

ISOCOM CH101

Transistor Optocouplers

Single-channel, radiation-hardened optocoupler for space applications
Surface mount 4-pin package
High current transfer ratio
Withstands up to 1,000V DC isolation
Ionizing dose tested to 150 Krad(Si)

ISOCOM CS201

Ceramic Hermetically Sealed, Radiation-Hard Transistor Optocouplers

Single-channel optocoupler for space applications
Hermetically sealed 6-pin DIP package
High current transfer ratio
Withstands 1,500V DC isolation
Ionising dose tested to 150 Krad(Si) and
Tested displacement damage to 1 MEV x 10¹³

ISOCOM CS600

Hermetically Sealed, Radiation-Hard High Gain Photon Optocouplers

Single-channel, high-speed optocoupler for space and isolation applications
Hermetically sealed 8-pin DIP package
High common mode rejection (1,000V/μs)
Withstands 1,500V DC and 2,500V DC isolation
Radiation tested to 1 Mrad(Si) and 1 MEV x 10¹³

ISOCOM CSM100

Ceramic Hermetically Sealed, Radiation-Hard Transistor Optocouplers

Single-channel high-gain optocoupler for space applications
Hermetically sealed 4-pin surface mount package
Current transfer ratio up to 1,500%
Low input current requirement of 0.5mA
Withstands up to 1,000V DC isolation

ISOCOM CSM1200

Ceramic Hermetically Sealed, Radiation Hard Transistor Optocoupler

Single-channel optocoupler for space applications
Hermetically sealed LCC-6 package
High current transfer ratio
Low input requirements
Withstands up to 1,000V DC isolation

ISOCOM CSM1224

Hermetically Sealed, Radiation-Hard Transistor Optocouplers

Single channel optocoupler for high-reliability applications
Hermetically sealed 6-pin package
High current transfer ratio
Withstands up to 1,000V DC isolation
Radiation tested to 150 Krad(Si)

ISOCOM CSM160

Hermetically Sealed, Radiation-Hard High Gain Optocouplers

Dual-channel or Quad-channel, high-gain optocoupler
Hermetically sealed 16-pin flatpack package
Current transfer ratio typically 1,000%
Low input requirement of 0.5mA
Withstands 1,500V DC
Radiation-tolerant

ISOCOM CSM166

Ceramic Hermetically Sealed, Radiation-Hard Transistor Optocouplers

Dual-channel or Quad-channel, high-reliability optocoupler for space
Hermetically sealed 16-pin flatpack package
High current transfer ratio
Radiation tolerance of 150 Krad(Si)
Withstands up to 1,500V DC isolation

ISOCOM IS49

Ceramic Hermetically Sealed, Radiation-Hard Transistor Optocouplers

Single-channel, hermetically sealed optocoupler
LCC-6 package design
Maximum continuous forward current: 50mA
Input-to-Output isolation voltage: 1,000V DC
Suitable for isolating high-speed digital or analog signals

J108

N-Channel JFET

InterFET J108 N-Channel JFET with N0450S Geometry. Typical leakage of -6pA and a low input capacitance of 85pF (max). All of this in a TO-92 package.

J112

N-Channel JFET

InterFET J112 N-Channel JFET with N0132S Geometry. Typical leakage of -4pA and a low input capacitance of 28pF (max). All of this in a TO-92 package.

J174

P-Channel JFET

InterFET J174 P-Channel JFET with P0099F Geometry. Typical leakage of 5pA and a low input capacitance of 32pF (max). All of this in a TO-92 package.

J175

P-Channel JFET

InterFET J175 P-Channel JFET with P0099F Geometry. Typical leakage of 5pA and a low input capacitance of 32pF (max). All of this in a TO-92 package.

J177

P-Channel JFET

InterFET J177 P-Channel JFET with P0099F Geometry. Typical leakage of 5pA and a low input capacitance of 32pF (max). All of this in a TO-92 package.

Audio

Energy & Power Systems

EV & Automotive

Healthcare & Medical

Industrial & Automation

Military & Defence

Oil & Gas

Renewables

Space

Military & Defence

DLA | Precision Current Sense Resistor

DLA | Precision Current Sense Resistor

Transistor Optocouplers

Ceramic Hermetically Sealed, Radiation-Hard Transistor Optocouplers

Hermetically Sealed, Radiation-Hard High Gain Photon Optocouplers

Ceramic Hermetically Sealed, Radiation-Hard Transistor Optocouplers

Ceramic Hermetically Sealed, Radiation Hard Transistor Optocoupler

Hermetically Sealed, Radiation-Hard Transistor Optocouplers

Hermetically Sealed, Radiation-Hard High Gain Optocouplers

Ceramic Hermetically Sealed, Radiation-Hard Transistor Optocouplers

Ceramic Hermetically Sealed, Radiation-Hard Transistor Optocouplers

N-Channel JFET

N-Channel JFET

P-Channel JFET

P-Channel JFET

P-Channel JFET

Resources

Related Articles