Motion Control

Isabellenhütte’s innovative solution for battery management system applications – the IsaSCALE IVT-S is a plug-and-play module for precise current and voltage measurement in package fitting into palm of your hand.

Magnetic sensors, digital isolators and low power switch sensors based on spintronic GMR (Giant Magnetoresistance) technology from NVE Corporation, including high temperature models.

Metal clad thick film and wirewould resistors from RARA, including inductive and non-inductive designs, braking resistors.

Range of short- and long sided thin film terminals from Susumu, including models with high power handling capacity, models suppressing the surface temperature and others.

RARA ULF100C

Flat Type Metal Clad Wire Wound Resistors
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 1.1kΩ
  • Power rating of 100W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For Non UL Approval see the IRF Series

RARA ULF150C

Flat Type Metal Clad Wire Wound Resistors
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 1.75kΩ
  • Power rating of 150W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For Non UL Approval see the IRF Series

RARA ULF200C

Flat Type Metal Clad Wire Wound Resistors
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 2.2kΩ
  • Power rating of 200W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For Non UL Approval see the IRF Series

RARA ULF250C

Flat Type Metal Clad Wire Wound Resistors
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 2.79kΩ
  • Power rating of 250W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For Non UL Approval see the IRF Series

RARA ULF300C

Flat Type Metal Clad Wire Wound Resistors
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 3.5kΩ
  • Power rating of 300W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For Non UL Approval see the IRF Series

RARA ULF400C

Flat Type Metal Clad Wire Wound Resistors
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 3.08kΩ
  • Power rating of 400W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For Non UL Approval see the IRF Series

RARA ULF500C

Flat Type Metal Clad Wire Wound Resistors
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 2.46kΩ
  • Power rating of 500W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For Non UL Approval see the IRF Series

RARA ULH100

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • UL approved
  • Short time overload of 10 x power rating is 5 seconds

RARA ULH120

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • UL approved
  • Short time overload of 10 x power rating is 5 seconds

RARA ULH150

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • UL approved
  • Short time overload of 10 x power rating is 5 seconds

RARA ULH200

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • UL approved
  • Short time overload of 10 x power rating is 5 seconds

RARA ULH300

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • UL approved
  • Short time overload of 10 x power rating is 5 seconds

RARA ULH400

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • UL approved
  • Short time overload of 10 x power rating is 5 seconds

RARA ULH500

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • UL approved
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds

RARA ULH60

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • UL approved
  • Extruded aluminium horizontal housing
  • Short time overload of 5 x power rating is 5 seconds

RARA ULH80

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • UL approved
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds

Resources

Related Articles