Renewables

We have designed various sensors and components for some of the largest renewable energy companies around as well as also helped with small startup companies investigating Wind, Wave and Tidal renewable projects. Whether you need a sensor to monitor hydraulic spikes or a braking resistor to help with turbine dumped energy, we are here to help.

RARA IRV600

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads, parallel or series connections
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Cement moulding with an extruded aluminium housing
  • Short time overload of 10 x power rating is 5 seconds

RARA IRV80

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium vertical housing
  • Short time overload of 10 x power rating is 5 seconds

RARA IRV800

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads, parallel or series connections
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Cement moulding with an extruded aluminium housing
  • Short time overload of 10 x power rating is 5 seconds

RARA RH25 (Non-Inductive)

High Power Metal Clad Resistors
  • Non-Inductive Metal clad wire wound resistor
  • Resistance range between 0.1Ω and 10kΩ
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +250°C
  • Cement moulding within aluminium housing
  • Short time overload of 5 x power rating is 5 seconds
  • Mounts on chassis to utilise heat sink effect

RARA ULF100C

Flat Type Metal Clad Wire Wound Resistors
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 1.1kΩ
  • Power rating of 100W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For Non UL Approval see the IRF Series

RARA ULF150C

Flat Type Metal Clad Wire Wound Resistors
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 1.75kΩ
  • Power rating of 150W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For Non UL Approval see the IRF Series

RARA ULF200C

Flat Type Metal Clad Wire Wound Resistors
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 2.2kΩ
  • Power rating of 200W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For Non UL Approval see the IRF Series

RARA ULF250C

Flat Type Metal Clad Wire Wound Resistors
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 2.79kΩ
  • Power rating of 250W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For Non UL Approval see the IRF Series

RARA ULF300C

Flat Type Metal Clad Wire Wound Resistors
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 3.5kΩ
  • Power rating of 300W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For Non UL Approval see the IRF Series

RARA ULF400C

Flat Type Metal Clad Wire Wound Resistors
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 3.08kΩ
  • Power rating of 400W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For Non UL Approval see the IRF Series

RARA ULF500C

Flat Type Metal Clad Wire Wound Resistors
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 2.46kΩ
  • Power rating of 500W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For Non UL Approval see the IRF Series

RARA ULH100

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • UL approved
  • Short time overload of 10 x power rating is 5 seconds

RARA ULH120

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • UL approved
  • Short time overload of 10 x power rating is 5 seconds

RARA ULH150

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • UL approved
  • Short time overload of 10 x power rating is 5 seconds

RARA ULH200

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • UL approved
  • Short time overload of 10 x power rating is 5 seconds

RARA ULH300

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • UL approved
  • Short time overload of 10 x power rating is 5 seconds

Related Articles