Energy & Power Systems

Newtek Sensor Solutions – Subsea and Marine

Newtek Sensor Solutions - Subsea and Marine
  • Choke Valve Position
  • Mooring Cables
  • Underwater Pipeline Monitoring
  • ROV Actuators & Fins
  • Extensometers

P1086

P-Channel JFET
InterFET P1086 P-Channel JFET with P0099F Geometry. Typical leakage of 5pA and a low input capacitance of 45pF (max). All of this in a TO-92 package.

PAD1

PicoAmp Diode
InterFET PAD1 N-Channel PicoAmp Diode with N0001H Geometry. Typical leakage of -0.5pA. All of this in a TO-18 package.

PN4117

N-Channel JFET
InterFET PN4117 N-Channel JFET with N0001H Geometry. Typical leakage of -1pA and a low input capacitance of 3pF (max). All of this in a TO-92 package.

PN4117A

N-Channel JFET
InterFET PN4117A N-Channel JFET with N0001H Geometry. Maximum leakage of -1pA and a low input capacitance of 3pF (max). All of this in a TO-92 package.

RARA FRH 25C

High Power Metal Clad Resistors
  • Metal clad thick film resistor
  • Resistance range from 1kΩ to 2MΩ
  • Max power rating of 15W
  • Cement moulding within aluminium housing
  • Short time overload of 2 x power rating is 5 seconds
  • High stability at conventional power ratings
  • Temperature range of -55°C up to +250°C

RARA FRH 50C

High Power Metal Clad Resistors
  • Metal clad thick film resistor
  • Resistance range from 1kΩ to 2MΩ
  • Max power rating of 25W
  • Cement moulding within aluminium housing
  • Short time overload of 2 x power rating is 5 seconds
  • High stability at conventional power ratings
  • Temperature range of -55°C up to +250°C

RARA IRB120

Metal Clad Economy Resistors
  • Metal clad wire wound economy resistor
  • Inductive resistance between 0.1Ω and 1.3kΩ
  • Non-inductive resistance between 0.1Ω and 300Ω
  • Power rating of 120W
  • Insulation resistance of 20MΩ minimum
  • Short time overload of 10 x power rating is 5 seconds

RARA IRB60

Metal Clad Economy Resistors
  • Metal clad wire wound economy resistor
  • Inductive resistance between 0.1Ω and 270Ω
  • Non-inductive resistance between 0.1Ω and 56Ω
  • Power rating of 60W
  • Insulation resistance of 20MΩ minimum
  • Short time overload of 5 x power rating is 5 seconds

RARA IRB80

Metal Clad Economy Resistors
  • Metal clad wire wound economy resistor
  • Inductive resistance between 0.1Ω and 910Ω
  • Non-inductive resistance between 0.1Ω and 110Ω
  • Power rating of 80W
  • Insulation resistance of 20MΩ minimum
  • Short time overload of 10 x power rating is 5 seconds

RARA IRF100

Flat Type Metal Clad Wire Wound Resistors
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 1.1kΩ
  • Power rating of 100W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series

RARA IRF150

Flat Type Metal Clad Wire Wound Resistors
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 1.75kΩ
  • Power rating of 150W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series

RARA IRF200

Flat Type Metal Clad Wire Wound Resistors
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 2.2kΩ
  • Power rating of 200W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series

RARA IRF250

Flat Type Metal Clad Wire Wound Resistors
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 2.79kΩ
  • Power rating of 250W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series

RARA IRF300

Flat Type Metal Clad Wire Wound Resistors
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 3.5kΩ
  • Power rating of 300W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series

RARA IRF400

Flat Type Metal Clad Wire Wound Resistors
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 4.45kΩ
  • Power rating of 400W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series

Resources

Related Articles