Motion Control

Isabellenhütte’s innovative solution for battery management system applications – the IsaSCALE IVT-S is a plug-and-play module for precise current and voltage measurement in package fitting into palm of your hand.

Magnetic sensors, digital isolators and low power switch sensors based on spintronic GMR (Giant Magnetoresistance) technology from NVE Corporation, including high temperature models.

Metal clad thick film and wirewould resistors from RARA, including inductive and non-inductive designs, braking resistors.

Range of short- and long sided thin film terminals from Susumu, including models with high power handling capacity, models suppressing the surface temperature and others.

RARA ULM1000

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Resistance options from 0.1Ω up to 140Ω
  • Power rating of up to 1000W (on heatsink)
  • Tolerance options between ±1% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For Non UL Approval see the IRM

RARA ULM1200

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Resistance options from 0.1Ω up to 175Ω
  • Power rating of up to 1200W (on heatsink)
  • Tolerance options between ±1% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For Non UL Approval see the IRM

RARA ULM1600

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Resistance options from 0.3Ω up to 88Ω
  • Power rating of up to 570W (on heatsink)
  • Tolerance options between ±1% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For Non UL Approval see the IRM

RARA ULM2000

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Resistance options from 0.45Ω up to 133Ω
  • Power rating of up to 650W (on heatsink)
  • Tolerance options between ±1% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For Non UL Approval see the IRM

RARA ULM2400

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Resistance options from 0.6Ω up to 144Ω
  • Power rating of up to 720W (on heatsink)
  • Tolerance options between ±1% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For Non UL Approval see the IRM

RARA ULM2800

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Resistance options from 0.7Ω up to 135Ω
  • Power rating of up to 750W (on heatsink)
  • Tolerance options between ±1% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For Non UL Approval see the IRM

RARA ULM600

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Resistance options from 0.1Ω up to 94Ω
  • Power rating of up to 600W (on heatsink)
  • Tolerance options between ±1% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For Non UL Approval see the IRM

RARA ULM800

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Resistance options from 0.1Ω up to 112Ω
  • Power rating of up to 800W (on heatsink)
  • Tolerance options between ±1% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For Non UL Approval see the IRM

RARA ULN100C

Flat Type Metal Clad Wire Wound Resistors
  • Narrow and Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 1.1kΩ
  • Power rating of 100W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For Non UL Approval see the IRN Series

RARA ULN150C

Flat Type Metal Clad Wire Wound Resistors
  • Narrow and Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 1.75kΩ
  • Power rating of 150W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For Non UL Approval see the IRN Series

RARA ULN50C

Flat Type Metal Clad Wire Wound Resistors
  • Narrow and Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 420Ω
  • Power rating of 50W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For Non UL Approval see the IRN Series

RARA ULV100

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium vertical housing
  • UL approved
  • Short time overload of 10 x power rating is 5 seconds

RARA ULV1000

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads, parallel or series connections
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • UL approved
  • Cement moulding with an extruded aluminium housing
  • Short time overload of 10 x power rating is 5 seconds

RARA ULV120

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium vertical housing
  • UL approved
  • Short time overload of 10 x power rating is 5 seconds

RARA ULV1200

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads, parallel or series connections
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • UL approved
  • Cement moulding with an extruded aluminium housing
  • Short time overload of 10 x power rating is 5 seconds

RARA ULV150

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium vertical housing
  • UL approved
  • Short time overload of 10 x power rating is 5 seconds

Resources

Related Articles