• SRT Resistor Technology
  • Non-magnetic thick film chip resistor
  • Resistance range from 100kΩ to 1TΩ
  • Tolerances from ±0.5% to ±30%
  • TCR from ±25 ppm/°C to ±2000 ppm/°C
  • Power rating of 0.35W (at +70°C)
  • Temperature range from -55°C up to +155°C
  • SRT Resistor Technology
  • High temperature, non-magnetic thick film chip resistor
  • Resistance range from 100kΩ to 1TΩ
  • Tolerances from ±1% to ±30%
  • TCR from ±25 ppm/°C to ±2000 ppm/°C
  • Power rating of 0.35W (at +70°C)
  • Temperature range from -55°C up to +300°C
  • SRT Resistor Technology
  • Non-magnetic thick film chip resistor
  • Resistance range from 10MΩ to 1TΩ
  • Tolerances from ±0.5% to ±30%
  • TCR from ±25 ppm/°C to ±2000 ppm/°C
  • Power rating of 0.35W (at +70°C)
  • Temperature range from -55°C up to +155°C
  • SRT Resistor Technology
  • High temperature, non-magnetic chip resistor
  • Resistance range from 10MΩ to 100GΩ
  • Tolerances from ±1% to ±30%
  • TCR from ±25 ppm/°C to ±2000 ppm/°C
  • Power rating of 0.350W (at +70°C)
  • Temperature range from -55°C up to +300°C
  • SRT Resistor Technology
  • Trimmable thick film chip resistor
  • Resistance range from 1Ω to 10MΩ
  • Tolerances from ±5% to ±30%
  • TCR from ±50 ppm/°C to ±250 ppm/°C
  • Power rating of 0.35W (at +70°C)
  • Temperature range from -55°C up to +155°C
  • SRT Resistor Technology
  • Trimmable non-magnetic, thick film chip resistor
  • Resistance range from 1Ω to 10MΩ
  • Tolerances from ±5% to ±30%
  • TCR from ±50 ppm/°C to ±250 ppm/°C
  • Power rating of 0.35W (at +70°C)
  • Temperature range from -55°C up to +155°C
  • SRT Resistor Technology
  • High temperature trimmable thick film chip resistor
  • 1210 package size
  • Temperature range of -55°C to +300°C
  • Voltage rating of 200V trimmed or 600V untrimmed (trimming ratios 3/single cut)
  • No organics
  • PtAg (Platinum-Silver), unpassivated contact areas for soldering and conductive gluing
  • Non-magnetic
  • Suitable for laser and air-abrasive trimming
  • High trimming ratios by special geometries
Please be advised that due to the ongoing supply issues with raw materials affecting the global electronics industry, as well as an increase in orders received by our manufacturing partners, a large number of products are facing increased lead times in recent months. For the latest lead time and stock availability, please contact one of our engineers who will be happy to discuss lead times further and the potential for alternative parts.