400W

RARA IRH400

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds

RARA IRM1000

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Resistance options from 0.1Ω up to 150Ω
  • Power rating of up to 1000W (on a heat sink)
  • Tolerance options between ±1% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULM

RARA IRV400

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium vertical housing
  • Short time overload of 10 x power rating is 5 seconds

Talk to an Engineer

Get help specifying or customising the right product for your application.

RARA IRV1000

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads, parallel or series connections
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Cement moulding with an extruded aluminium housing
  • Short time overload of 10 x power rating is 5 seconds

RARA ULH400

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • UL approved
  • Short time overload of 10 x power rating is 5 seconds

RARA ULM1000

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Resistance options from 0.1Ω up to 140Ω
  • Power rating of up to 1000W (on heatsink)
  • Tolerance options between ±1% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For Non UL Approval see the IRM

RARA ULV400

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium vertical housing
  • UL approved
  • Short time overload of 10 x power rating is 5 seconds

RARA ULV1000

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads, parallel or series connections
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • UL approved
  • Cement moulding with an extruded aluminium housing
  • Short time overload of 10 x power rating is 5 seconds

RARA IRF400

Flat Type Metal Clad Wire Wound Resistors
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 4.45kΩ
  • Power rating of 400W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series

RARA ULF400C

Flat Type Metal Clad Wire Wound Resistors
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 3.08kΩ
  • Power rating of 400W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For Non UL Approval see the IRF Series

Custom Component Solutions

Working alongside your design team from the earliest stage, we help you select the right part for the application and, where a standard part will not do, develop customised components with our manufacturing partners such as lead length, termination and package size.

Related Components

Manufacturers

Looking for 400W?

The below manufacturers are all of our authorised partners that produce 400W or related products.

400W