Wireless

Wireless

Range of wireless temperature sensors from Cynergy3, especially suitable where access is impractical, difficult or otherwise limited. Range of receivers to be used with the Cynergy3 wireless sensors allows real time processing of the data from the sensor across number of channels. Sensors and receivers can be combined and linked as needed.

Show:
Sort By:

Cynergy3 IWR-1 Wireless Receiver - 1 channel

The IWR-1 single channel wireless receiver from Cynergy3 is a designed to be paired with IWPT, IWPTU, IWTT and IWTTU series of wireless pressure and temperature sensors. With end-to-end accuracy of 0.25% FS BFSL and up to 750m line-of-sight range (with use of optional 3dBl antenna), the wireless system offers an economical alternative to traditional wired transducer solutions. While offering user-selectable features (choice of output, transmission rate etc.), this received is designed to work "out-of-the-box" as a simple plug-and-play remote measurement solution.

  • Single channel wireless receiver for IWPT/U and IWTT/U series of wireless pressure and temperature transducers
  • Simple plug-and-play installation (configuration software available to download from Technical Library if required)
  • User selectable output: 4-20mA or 1-5V
  • Accuracy <±0.25% of the full scale (BFSL)
  • Operating temperature range (media temperature) of -10°C to +50°C
  • Clean contact output for process, low battery or loss of signal alarm function
  • Up to 750m line-of-sight range when used with 3dBl antenna (up to 500m with standard 0dBl antenna)
  • Powered by 12-32Vdc supply

A range of auxilliary parts is available for the IWR-1 receiver, including DIN rail and wall mounting kits, upgraded 3dBl antenna, etc. - please speak to our technical sales team to discuss your requirements.

The below table gives the full specifications for the Cynergy3 IWR-1 wireless receiver:

Cynergy3 IWR-1 specifications

£0.00 Ex Tax: £0.00

Cynergy3 IWR-5 Wireless Receiver - 5 channel

The IWR-5 five channel wireless receiver from Cynergy3 is a designed to be paired with IWPT, IWPTU, IWTT and IWTTU series of wireless pressure and temperature sensors. With end-to-end accuracy of 0.25% FS BFSL and up to 750m line-of-sight range (with use of optional 3dBl antenna), the wireless system offers an economical alternative to traditional wired transducer solutions. The IWR-5 offers user-selectable features (choice of output, transmission rate etc.) and requires minimal setup using the software provided, ensuring a simple solution to multi-channel remote measurement applications.

  • Wireless receiver for IWPT/U and IWTT/U series of wireless pressure and temperature transducers
  • 5 channel
  • Simple installation using the IWR-Set software (download link available in Technical Library)
  • User selectable output: 4-20mA or 1-5V
  • Accuracy <±0.25% of the full scale (BFSL)
  • Operating temperature range (media temperature) of -10°C to +50°C
  • Clean contact output for process, low battery or loss of signal alarm function
  • Up to 750m line-of-sight range when used with 3dBl antenna (up to 500m with standard 0dBl antenna)
  • Powered by 12-32Vdc supply

A range of auxilliary parts is available for the IWR-5 receiver, including DIN rail and wall mounting kits, upgraded 3dBl antenna, etc. - please speak to our technical sales team to discuss your requirements.

The below table gives the full specifications for the Cynergy3 IWR-5 wireless receiver:

Cynergy3 IWR-5 specifications

£0.00 Ex Tax: £0.00

Cynergy3 IWTT Wireless Temperature Transducer Series - 1/4" BSP

The IWTT series of wireless industrial temperature transducers from Cynergy3 utilises J or K type thermocouples or PT100 RTD sensor to offer an excellent cost effective alternative to traditional wired transducers in inaccessible or expensive installation environments. The sensors feature accuracy as low as <±0.1% of the full scale, temperature coefficient of ±500ppm/°C and up to 750m line-of-sight range. The IWTT series' user selectable features include transmission update rates, output (4-20mA or 1-5V), and configuration (single or 5 channel; depending on receiver used). The IWTT series is designed to be paired with one of the iwr family of wireless receivers for simple plug-and-play temperature measurement solution; a compression fitting is available to allow easy alignment of the head with the receiver. The sensors are housed within a acetal body, making them suitable to use in harsh environments. Each device comes temperature compensated, calibrated and fully traceable.

  • Industrial wireless temperature transducers
  • Selection of type J-type thermocouple (0-1200°C range), K-type thermocouple (0-1350°C range) or PT100 RTD sensor (-200 - +800°C range)
  • Acetal housing suitable for use in harsh environments
  • Accuracy <±0.1% of the full scale (non-linearity and hysteresis)
  • Operating temperature range (ambient temperature) of -20°C to 50°C
  • Battery life up to 5 years with 10s update rate
  • Process connection via 1/4" BSP male

The IWTT series of temperature transducers is available in a range of input and sheath length options. Further customisation is available on this product - speak to our technical sales team to discuss your requirement.

Typical applications for the Cynergy3 IWTT pressure transducer series include:

  • Simple cable replacement installation - dispense with expensive cable runs
  • Environmental monitoring - pumping stations, sewage plants, water treatment etc.
  • Facilities management - boiler rooms, plant hydraulics, plant pneumatics
  • Asset monitoring - tank farms, process plants, HVAC and building management
  • Service contract - temporary installation for servicing and field trials

The below table gives the full specifications for each resistor model available including the Cynergy3 IWTT series:

Cynergy3 IWTT series specifications

£0.00 Ex Tax: £0.00

Cynergy3 IWTTU Wireless Temperature Transducer Series - 1/4" NPT

The IWTTU series of wireless industrial temperature transducers from Cynergy3 utilises J or K type thermocouples or PT100 RTD sensor to offer an excellent cost effective alternative to traditional wired transducers in inaccessible or expensive installation environments. The sensors feature accuracy as low as <±0.1% of the full scale, temperature coefficient of ±500ppm/°C and up to 750m line-of-sight range. The IWTTU series' user selectable features include transmission update rates, output (4-20mA or 1-5V), and configuration (single or 5 channel; depending on receiver used). The IWTTU series is designed to be paired with one of the iwr family of wireless receivers for simple plug-and-play temperature measurement solution; a compression fitting is available to allow easy alignment of the head with the receiver. The sensors are housed within a acetal body, making them suitable to use in harsh environments. Each device comes temperature compensated, calibrated and fully traceable.

  • Industrial wireless temperature transducers
  • Selection of type J-type thermocouple (0-1200°C range), K-type thermocouple (0-1350°C range) or PT100 RTD sensor (-200 - +800°C range)
  • Acetal housing suitable for use in harsh environments
  • Accuracy <±0.1% of the full scale (non-linearity and hysteresis)
  • Operating temperature range (ambient temperature) of -20°C to 50°C
  • Battery life up to 5 years with 10s update rate
  • Process connection via 1/4" NPT male

The IWTTU series of temperature transducers is available in a range of input and sheath length options. Further customisation is available on this product - speak to our technical sales team to discuss your requirement.

Typical applications for the Cynergy3 IWTTU pressure transducer series include:

  • Simple cable replacement installation - dispense with expensive cable runs
  • Environmental monitoring - pumping stations, sewage plants, water treatment etc.
  • Facilities management - boiler rooms, plant hydraulics, plant pneumatics
  • Asset monitoring - tank farms, process plants, HVAC and building management
  • Service contract - temporary installation for servicing and field trials

The below table gives the full specifications for each resistor model available including the Cynergy3 IWTTU series:

Cynergy3 IWTTU series specifications

£0.00 Ex Tax: £0.00