±40 ppm/°C

Isabellenhütte BAL Series

Current Sensing Precision Shunt Resistor
  • Precision shunt resistor
  • Resistance value of 0.1mΩ
  • Tolerance of ±5%
  • TCR of 20 ± 40 ppm/℃
  • Up to 12W permanent power
  • Continuous current load up to 350 A
  • AEC-Q200 qualification

Isabellenhütte WAF Series

Current Sensing Precision Shunt Resistor
  • Current sensing precision resistor
  • Constant current up to 77A (1mOhm)
  • Resistance range from 0.000487Ω to 0.001Ω
  • Tolerances of ±1.0% and ±5.0%
  • TCR down to ±40ppm/K
  • Power rating up to 3.5W (at 70°C)
  • AEC-Q200 qualified

RARA RH25 (Inductive)

High Power Metal Clad Resistors
  • Inductive Metal clad wire wound resistor
  • Resistance range between 0.27Ω and 25kΩ
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +250°C
  • Cement moulding within aluminium housing
  • Short time overload of 5 x power rating is 5 seconds
  • Mounts on chassis to utilise heat sink effect

Talk to an Engineer

Get help specifying or customising the right product for your application.

RARA RH25 (Non-Inductive)

High Power Metal Clad Resistors
  • Non-Inductive Metal clad wire wound resistor
  • Resistance range between 0.1Ω and 10kΩ
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +250°C
  • Cement moulding within aluminium housing
  • Short time overload of 5 x power rating is 5 seconds
  • Mounts on chassis to utilise heat sink effect

RARA RH50 (Inductive)

High Power Metal Clad Resistors
  • Metal clad wire wound resistor
  • Resistance range between 0.68Ω and 50kΩ
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +250°C
  • Cement moulding within aluminium housing
  • Short time overload of 5 x power rating is 5 seconds
  • Mounts on chassis to utilise heat sink effect

RARA RH50 (Non-Inductive)

High Power Metal Clad Resistors
  • Metal clad wire wound resistor
  • Resistance range between 0.2Ω and 20kΩ
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +250°C
  • Cement moulding within aluminium housing
  • Short time overload of 5 x power rating is 5 seconds
  • Mounts on chassis to utilise heat sink effect

Custom Component Solutions

Working alongside your design team from the earliest stage, we help you select the right part for the application and, where a standard part will not do, develop customised components with our manufacturing partners such as lead length, termination and package size.

Related Components

Manufacturers

Looking for ±40 ppm/°C?

The below manufacturers are all of our authorised partners that produce ±40 ppm/°C or related products.

±40 ppm/°C