Energy & Power Systems

RARA IRF500

Flat Type Metal Clad Wire Wound Resistors
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 5.78kΩ
  • Power rating of 500W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series

RARA IRH100

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds

RARA IRH120

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds

RARA IRH150

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds

RARA IRH200

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds

RARA IRH300

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds

RARA IRH400

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds

RARA IRH500

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds

RARA IRH60

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 5 x power rating is 5 seconds

RARA IRH80

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds

RARA IRM1000

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Resistance options from 0.1Ω up to 150Ω
  • Power rating of up to 1000W (on a heat sink)
  • Tolerance options between ±1% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULM

RARA IRM1200

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Resistance options from 0.1Ω up to 160Ω
  • Power rating of up to 1200W (on a heat sink)
  • Tolerance options between ±1% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULM

RARA IRM1600

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Resistance options from 0.3Ω up to 88Ω
  • Power rating of up to 570W (free air)
  • Tolerance options between ±1% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULM

RARA IRM2000

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Resistance options from 0.45Ω up to 133Ω
  • Power rating of up to 650W (free air)
  • Tolerance options between ±1% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULM

RARA IRM2400

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Resistance options from 0.6Ω up to 144Ω
  • Power rating of up to 720W (free air)
  • Tolerance options between ±1% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULM

RARA IRM2800

Metal Clad Wire Wound Resistors
  • Metal clad wire wound resistor
  • Resistance options from 0.7Ω up to 135Ω
  • Power rating of up to 750W (free air)
  • Tolerance options between ±1% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULM

Resources

Related Articles