Military & Defense

Selection of ‘EEE’ approved surface-mount current sensing resistors by Isabellenhütte and ultra-precision resistors from Vishay Foil Resistors
Selection of Military grade surface mount, high voltage chip resistors from Ohmcraft.

Cissoid’s range of semiconductors designed especially for high temperature applications and harsh environments.

‘EEE’ approved pressure sensors from Emerson Paine™.

Robust and accurate general purpose load cells from Lord Sensing Stellar Technology.

Thermocouple foil temperature sensors by RdF.

Military & Defense

Exxelia Ohmcraft MCH 5020

Military Grade High Voltage SMD Resistors
Resistance range from 10kΩ to 50GΩ
Tolerances from ±0.1% to ±20%
TCR from ±25 ppm/°C to ±200 ppm/°C
Power rating of 2W
Voltage rating of 5kV
Temperature range from -55°C to +150°C

Datasheet

ISOCOM CH101

Single-channel, radiation-hardened optocoupler for space applications
Surface mount 4-pin package
High current transfer ratio
Withstands up to 1,000V DC isolation
Ionizing dose tested to 150 Krad(Si)

Datasheet

ISOCOM CS201

Single-channel optocoupler for space applications
Hermetically sealed 6-pin DIP package
High current transfer ratio
Withstands 1,500V DC isolation
Ionising dose tested to 150 Krad(Si) and
Tested displacement damage to 1 MEV x 10¹³

Datasheet

ISOCOM CS600

Single-channel, high-speed optocoupler for space and isolation applications
Hermetically sealed 8-pin DIP package
High common mode rejection (1,000V/μs)
Withstands 1,500V DC and 2,500V DC isolation
Radiation tested to 1 Mrad(Si) and 1 MEV x 10¹³

Datasheet

ISOCOM CSM100

Single-channel high-gain optocoupler for space applications
Hermetically sealed 4-pin surface mount package
Current transfer ratio up to 1,500%
Low input current requirement of 0.5mA
Withstands up to 1,000V DC isolation

Datasheet

ISOCOM CSM1200

Single-channel optocoupler for space applications
Hermetically sealed LCC-6 package
High current transfer ratio
Low input requirements
Withstands up to 1,000V DC isolation

Datasheet

ISOCOM CSM1224

Single channel optocoupler for high-reliability applications
Hermetically sealed 6-pin package
High current transfer ratio
Withstands up to 1,000V DC isolation
Radiation tested to 150 Krad(Si)

Datasheet

ISOCOM CSM160

Dual-channel or Quad-channel, high-gain optocoupler
Hermetically sealed 16-pin flatpack package
Current transfer ratio typically 1,000%
Low input requirement of 0.5mA
Withstands 1,500V DC
Radiation-tolerant

Datasheet

ISOCOM CSM166

Dual-channel or Quad-channel, high-reliability optocoupler for space
Hermetically sealed 16-pin flatpack package
High current transfer ratio
Radiation tolerance of 150 Krad(Si)
Withstands up to 1,500V DC isolation

Datasheet

ISOCOM IS49

Single-channel, hermetically sealed optocoupler
LCC-6 package design
Maximum continuous forward current: 50mA
Input-to-Output isolation voltage: 1,000V DC
Suitable for isolating high-speed digital or analog signals

Datasheet

Metis Engineering H Guard

H Guard is a CAN based sensor that can measure absolute pressure, air temperature, H2 (Hydrogen), absolute air water content, relative humidity, dew point temperature and 3 axis acceleration.

Absolute Pressure: 0.3 to 1.2 Bar
Air Temperature: -40°C to +125°C
Relative Humidity: 0% to 100%
Dew Point Temperature: 0 to 100°C
Accelerometer Range: -24 to +24g

Datasheet

RdF 20100 Series

Butt bonded foil thermocouple
Micro-foil® thickness of 0.0128mm (0.0005″)
Insulation resistance of 50MΩ at 50VDC in Ungrounded junction TCs
2 wire configuration
Removable Kapton® frame for bare foil applications
Standard lead length of 6″, additional lengths available on request

RdF 20101 Series

Butt bonded foil thermocouple
Micro-foil® thickness of 0.0128mm (0.0005″)
Insulation resistance of 50MΩ at 50VDC in Ungrounded junction TCs
2 wire configuration
Removable Kapton® frame for bare foil applications
Standard lead length of 6″, additional lengths available on request

RdF 20102 Series

Butt bonded foil thermocouple
Micro-foil® thickness of 0.0128mm (0.0005″)
Insulation resistance of 50MΩ at 50VDC in Ungrounded junction TCs
2 wire configuration
Removable Kapton® frame for bare foil applications
Standard lead length of 6″, additional lengths available on request

RdF 22810 Series

Polyimide insulated flexible RTD Stikon® temperature sensor
Standard sensing element is platinum with a resistance of 100Ω at 0°C
3 or 4 conductor ribbon cable
Customisible cable lengths

RdF 26721 Series

Stikon® type E thermocouple
Insulation resistance of 50MΩ minimum at 50VDC in Ungrounded junction TCs
2 wire configuration
Kapton® case material
Embeded in a paper thin laminate

Exxelia Ohmcraft MCH 5020

Military Grade High Voltage SMD Resistors
Resistance range from 10kΩ to 50GΩ
Tolerances from ±0.1% to ±20%
TCR from ±25 ppm/°C to ±200 ppm/°C
Power rating of 2W
Voltage rating of 5kV
Temperature range from -55°C to +150°C

ISOCOM CH101

Single-channel, radiation-hardened optocoupler for space applications
Surface mount 4-pin package
High current transfer ratio
Withstands up to 1,000V DC isolation
Ionizing dose tested to 150 Krad(Si)

ISOCOM CS201

Single-channel optocoupler for space applications
Hermetically sealed 6-pin DIP package
High current transfer ratio
Withstands 1,500V DC isolation
Ionising dose tested to 150 Krad(Si) and
Tested displacement damage to 1 MEV x 10¹³

ISOCOM CS600

Single-channel, high-speed optocoupler for space and isolation applications
Hermetically sealed 8-pin DIP package
High common mode rejection (1,000V/μs)
Withstands 1,500V DC and 2,500V DC isolation
Radiation tested to 1 Mrad(Si) and 1 MEV x 10¹³

ISOCOM CSM100

Single-channel high-gain optocoupler for space applications
Hermetically sealed 4-pin surface mount package
Current transfer ratio up to 1,500%
Low input current requirement of 0.5mA
Withstands up to 1,000V DC isolation

ISOCOM CSM1200

Single-channel optocoupler for space applications
Hermetically sealed LCC-6 package
High current transfer ratio
Low input requirements
Withstands up to 1,000V DC isolation

ISOCOM CSM1224

Single channel optocoupler for high-reliability applications
Hermetically sealed 6-pin package
High current transfer ratio
Withstands up to 1,000V DC isolation
Radiation tested to 150 Krad(Si)

ISOCOM CSM160

Dual-channel or Quad-channel, high-gain optocoupler
Hermetically sealed 16-pin flatpack package
Current transfer ratio typically 1,000%
Low input requirement of 0.5mA
Withstands 1,500V DC
Radiation-tolerant

ISOCOM CSM166

Dual-channel or Quad-channel, high-reliability optocoupler for space
Hermetically sealed 16-pin flatpack package
High current transfer ratio
Radiation tolerance of 150 Krad(Si)
Withstands up to 1,500V DC isolation

ISOCOM IS49

Single-channel, hermetically sealed optocoupler
LCC-6 package design
Maximum continuous forward current: 50mA
Input-to-Output isolation voltage: 1,000V DC
Suitable for isolating high-speed digital or analog signals

Metis Engineering H Guard

H Guard is a CAN based sensor that can measure absolute pressure, air temperature, H2 (Hydrogen), absolute air water content, relative humidity, dew point temperature and 3 axis acceleration.

Absolute Pressure: 0.3 to 1.2 Bar
Air Temperature: -40°C to +125°C
Relative Humidity: 0% to 100%
Dew Point Temperature: 0 to 100°C
Accelerometer Range: -24 to +24g