Military & Defense

Selection of ‘EEE’ approved surface-mount current sensing resistors by Isabellenhütte and ultra-precision resistors from Vishay Foil Resistors
Selection of Military grade surface mount, high voltage chip resistors from Ohmcraft.

Cissoid’s range of semiconductors designed especially for high temperature applications and harsh environments.

‘EEE’ approved pressure sensors from Emerson Paine™.

Robust and accurate general purpose load cells from Lord Sensing Stellar Technology.

Thermocouple foil temperature sensors by RdF.

Military & Defense

SRT Microcéramique Radial Moulded Capacitors (500V – 2kV)

Radial moulded capacitor series for military applications
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1Vrms and 1kHz
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Climatic Category 55/125/56

Add to Compare

SRT Microcéramique Radial Moulded Capacitors (63V – 250V)

Radial moulded capacitor series for military applications
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1Vrms and 1kHz
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Climatic category: 55/125/56

Add to Compare

SRT Microcéramique RF Power High Frequency Capacitor Series

MLCC RF power, high frequency capacitors for RF instruments, lasers and similar applications
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 5.10^-4 at 1V_rms and 1MHz for values ≤ 1000pF and under 5.10^-4 at 1V_rms and 1KHz for values > 1000pF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

Add to Compare

SRT Microcéramique NP0 Capacitor Stack Series

NP0 high capacitance value capacitor stacks, ideal for SMPS applications
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor 10.10^-4 maximum
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less
Dielectric withstanding voltage of 2.5Un for 5s with 50mA maximum charging current

Add to Compare

SRT Microcéramique X7R Capacitor Stack Series

X7R capacitor stacks, ideal for input/output filtering in SMPS applications
Highest quality and reliability, suitable for safety-critical industries
Maximum dissipation factor of 2.5% at 1V_rms, 1kHz, 25°C
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less
Dielectric withstanding voltage of 2.5Un for 5s with 50mA maximum charging current

Add to Compare

Stellar Technology PNC700 Series

General purpose, high accuracy pancake tension and compression load cell
Barometric compensation
Shock and vibration resistant
Low profile design
All welded stainless steel construction
5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
Temperature effect on zero ±0.002% FSO/°F
Temperature effect on span ±0.002% Reading/°F
Zero balance ±1% FSO

Add to Compare

Stellar Technology PNC710 Series

General purpose, high accuracy pancake tension and compression load cell
Barometric compensation
Shock and vibration resistant
Low profile design
All welded stainless steel construction
5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
Temperature effect on zero ±0.002% FSO/°F
Temperature effect on span ±0.002% Reading/°F
Zero balance ±1% FSO

Add to Compare

Stellar Technology PNC720 Series

General purpose, high accuracy pancake tension and compression load cell
Hysteresis of 0.08% FSO
Barometric compensation
Shock and vibration resistant
Low profile design
All welded stainless steel construction
5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
Temperature effect on zero ±0.002% FSO/°F
Temperature effect on span ±0.002% Reading/°F
Zero balance ±1% FSO

Add to Compare

Stellar Technology PNC770 Series

Low profile, lightweight and precise pancake load cell
Low off-axis sensitivity
Barometric compensation
Shock and vibration resistant
Compact size with integral base with integral cable
Life cycle of 10 million
5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
Temperature effect on zero ±0.002% FSO/°F
Temperature effect on span ±0.002% Reading/°F
Zero balance ±1% FSO

Add to Compare

Stellar Technology PNC772 Series

Low profile, lightweight and precise pancake load cell
Low off-axis sensitivity
Barometric compensation
Shock and vibration resistant
Compact size with integral base and bolt-on flange electrical connector
Life cycle of 10 million
5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
Temperature effect on zero ±0.002% FSO/°F
Temperature effect on span ±0.002% Reading/°F
Zero balance ±1% FSO

Add to Compare

Stellar Technology RDE900 Series

Shackle ready, rod end load cell
In line tension
Variety of thread combinations
Shock and vibration resistant
All welded stainless steel construction
5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
Temperature effect on zero ±0.005% FSO/°F
Temperature effect on span ±0.005% Reading/°F
Zero balance ±1% FSO

Add to Compare

Stellar Technology RDE905 Series

General purpose rod end compression and tension load cell
High off-axis capability of up to 20% of full scale loads
Variety of thread combinations available
Shock and vibration resistant
All welded stainless steel construction
5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
Temperature effect on zero of ±0.005% FSO/°F
Temperature effect on span ±0.005% Reading/°F
Zero balance ±1% FSO

Add to Compare

Stellar Technology RDE915 Series

Compact, high capacity rod end compression and tension load cell
Environmentally sealed
Low defection
Shock and vibration resistant
High strength tool steel
5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
Temperature effect on zero ±0.005% FSO/°F
Temperature effect on span ±0.005% Reading/°F
Zero balance ±1% FSO

Add to Compare

Stellar Technology VLC856 Series

General purpose subminiature compression load cell
Small size
Shock and vibration resistant
All welded stainless steel
5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
Temperature effect on zero ±0.01% FSO/°F
Temperature effect on span ±0.01% Reading/°F
Zero balance ±3% FSO

Add to Compare

Stellar Technology VLU850 Series

General purpose subminiature tension or compression load cell
Small size
Shock and vibration resistant
All welded stainless steel
5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
Temperature effect on zero ±0.01% FSO/°F
Temperature effect on span ±0.01% Reading/°F
Zero balance ±3% FSO

Add to Compare

SRT Microcéramique Radial Moulded Capacitors (500V – 2kV)

Radial moulded capacitor series for military applications
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1Vrms and 1kHz
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Climatic Category 55/125/56

SRT Microcéramique Radial Moulded Capacitors (63V – 250V)

Radial moulded capacitor series for military applications
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1Vrms and 1kHz
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Climatic category: 55/125/56

SRT Microcéramique RF Power High Frequency Capacitor Series

MLCC RF power, high frequency capacitors for RF instruments, lasers and similar applications
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 5.10^-4 at 1V_rms and 1MHz for values ≤ 1000pF and under 5.10^-4 at 1V_rms and 1KHz for values > 1000pF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique NP0 Capacitor Stack Series

NP0 high capacitance value capacitor stacks, ideal for SMPS applications
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor 10.10^-4 maximum
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less
Dielectric withstanding voltage of 2.5Un for 5s with 50mA maximum charging current

SRT Microcéramique X7R Capacitor Stack Series

X7R capacitor stacks, ideal for input/output filtering in SMPS applications
Highest quality and reliability, suitable for safety-critical industries
Maximum dissipation factor of 2.5% at 1V_rms, 1kHz, 25°C
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less
Dielectric withstanding voltage of 2.5Un for 5s with 50mA maximum charging current