We’re Exhibiting at Space Tech Europe 2025

Space Tech Expo Europe, 18-20th November 2025, Bremen, Germany, Stand G56

Motion Control

Isabellenhütte’s innovative solution for battery management system applications – the IsaSCALE IVT-S is a plug-and-play module for precise current and voltage measurement in package fitting into palm of your hand.

Magnetic sensors, digital isolators and low power switch sensors based on spintronic GMR (Giant Magnetoresistance) technology from NVE Corporation, including high temperature models.

Metal clad thick film and wirewould resistors from RARA, including inductive and non-inductive designs, braking resistors.

Range of short- and long sided thin film terminals from Susumu, including models with high power handling capacity, models suppressing the surface temperature and others.

Motion Control

  • RARA

RARA IRF500

RARA IRN/ULN/IRF/ULF Flat Type Metal Clad Wire Wound Resistors
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 5.78kΩ
  • Power rating of 500W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series
  • Compliant
  • RARA

RARA IRH100

RARA Aluminum Housed, Chassis Mount Resistor Model: IRH, IRV, ULH, ULV, ARH, ARV
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds
  • Compliant
  • RARA

RARA IRH120

RARA Aluminum Housed, Chassis Mount Resistor Model: IRH, IRV, ULH, ULV, ARH, ARV
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds
  • Compliant
  • RARA

RARA IRH150

RARA Aluminum Housed, Chassis Mount Resistor Model: IRH, IRV, ULH, ULV, ARH, ARV
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds
  • Compliant
  • RARA

RARA IRH200

RARA Aluminum Housed, Chassis Mount Resistor Model: IRH, IRV, ULH, ULV, ARH, ARV
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds
  • Compliant
  • RARA

RARA IRH300

RARA Aluminum Housed, Chassis Mount Resistor Model: IRH, IRV, ULH, ULV, ARH, ARV
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds
  • Compliant
  • RARA

RARA IRH400

RARA Aluminum Housed, Chassis Mount Resistor Model: IRH, IRV, ULH, ULV, ARH, ARV
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds
  • Compliant
  • RARA

RARA IRH500

RARA Aluminum Housed, Chassis Mount Resistor Model: IRH, IRV, ULH, ULV, ARH, ARV
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds
  • Compliant
  • RARA

RARA IRH60

RARA Aluminum Housed, Chassis Mount Resistor Model: IRH, IRV, ULH, ULV, ARH, ARV
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 5 x power rating is 5 seconds
  • Compliant
  • RARA

RARA IRH80

RARA Aluminum Housed, Chassis Mount Resistor Model: IRH, IRV, ULH, ULV, ARH, ARV
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds
  • Compliant
  • RARA

RARA IRM1000

  • Metal clad wire wound resistor
  • Resistance options from 0.1Ω up to 150Ω
  • Power rating of up to 1000W (on a heat sink)
  • Tolerance options between ±1% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULM
  • Compliant
  • RARA

RARA IRM1200

  • Metal clad wire wound resistor
  • Resistance options from 0.1Ω up to 160Ω
  • Power rating of up to 1200W (on a heat sink)
  • Tolerance options between ±1% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULM
  • Compliant
  • RARA

RARA IRM1600

  • Metal clad wire wound resistor
  • Resistance options from 0.3Ω up to 88Ω
  • Power rating of up to 570W (free air)
  • Tolerance options between ±1% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULM
  • Compliant
  • RARA

RARA IRM2000

  • Metal clad wire wound resistor
  • Resistance options from 0.45Ω up to 133Ω
  • Power rating of up to 650W (free air)
  • Tolerance options between ±1% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULM
  • Compliant
  • RARA

RARA IRM2400

  • Metal clad wire wound resistor
  • Resistance options from 0.6Ω up to 144Ω
  • Power rating of up to 720W (free air)
  • Tolerance options between ±1% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULM
  • Compliant
  • RARA

RARA IRM2800

  • Metal clad wire wound resistor
  • Resistance options from 0.7Ω up to 135Ω
  • Power rating of up to 750W (free air)
  • Tolerance options between ±1% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULM
  • Compliant

RARA IRF500

  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 5.78kΩ
  • Power rating of 500W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series

RARA IRH100

  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds

RARA IRH120

  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds

RARA IRH150

  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds

RARA IRH200

  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds

RARA IRH300

  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds

RARA IRH400

  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds

RARA IRH500

  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds

RARA IRH60

  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 5 x power rating is 5 seconds

RARA IRH80

  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds

RARA IRM1000

  • Metal clad wire wound resistor
  • Resistance options from 0.1Ω up to 150Ω
  • Power rating of up to 1000W (on a heat sink)
  • Tolerance options between ±1% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULM

RARA IRM1200

  • Metal clad wire wound resistor
  • Resistance options from 0.1Ω up to 160Ω
  • Power rating of up to 1200W (on a heat sink)
  • Tolerance options between ±1% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULM

RARA IRM1600

  • Metal clad wire wound resistor
  • Resistance options from 0.3Ω up to 88Ω
  • Power rating of up to 570W (free air)
  • Tolerance options between ±1% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULM

RARA IRM2000

  • Metal clad wire wound resistor
  • Resistance options from 0.45Ω up to 133Ω
  • Power rating of up to 650W (free air)
  • Tolerance options between ±1% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULM

RARA IRM2400

  • Metal clad wire wound resistor
  • Resistance options from 0.6Ω up to 144Ω
  • Power rating of up to 720W (free air)
  • Tolerance options between ±1% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULM

RARA IRM2800

  • Metal clad wire wound resistor
  • Resistance options from 0.7Ω up to 135Ω
  • Power rating of up to 750W (free air)
  • Tolerance options between ±1% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULM

Resources

Related Articles