Supporting Manufacturer Information

SMD (surface mount) series

  • Isabellenhütte

Isabellenhütte VMI Series

  • Current sensing precision resistor
  • Long sided terminal surface-mount 0805 chip size
  • Resistance range from 0.01Ω to 0.05Ω
  • Tolerance of ±5%
  • TCR from <±30 ppm/°C
  • Power rating up to 0.5W (at +100°C)
  • Temperature range from -65°C to +170°C
  • Compliant
Isabellenhütte VMI Series
  • Isabellenhütte

Isabellenhütte VMI-R000 Series

  • Zero ohm jumper / Power bridge
  • Surface-mount design in a 0805 chip size
  • Resistance value of <200µΩ
  • TCR of 3200 ±500 ppm/°C
  • Constant current of up to 35A DC
  • Power rating of 0.25W (at +170°C)
  • Temperature range from -65°C to +170°C
  • Compliant
Isabellenhütte VMI-R000
  • Isabellenhütte

Isabellenhütte VMK Series

  • Current sensing precision resistor
  • 2-terminal surface-mount design in a 1206 chip size
  • Resistance range from 0.01Ω to 0.47Ω
  • Tolerance range from ±1% to ±5%
  • TCR of <±20 ppm/°C
  • Power rating up to 1.5W
  • Temperature range from -65°C to +170°C
  • Compliant
Isabellenhütte VMK Series
  • Merit Sensor

Merit Sensor 7000 Series

Merit Sensor - 7000 Series
  • High-volume, medium-pressure sensing elements
  • Pressure ranges available 15psi, 50psi, 100psi, 300psi & 500psi
  • Absolute or Gauge options available
  • Temperature range −40°C to +150°C
  • Full scale outputs from 60mV to 210mV (at 5V excitation)
  • Impedance of 5kΩ (typical) or 3.5kΩ±0.5kΩ (optional)
  • Suitable for clean, dry air and non-corrosive gases media
  • Compliant
Merit Sensor 7000
  • Merit Sensor

Merit Sensor AP Series

  • Room temperature calibrated pressure sensor
  • Available for air, gas and liquid media
  • Custom options available
  • Utilises a piezoresistive Wheatstone bridge with a chemically etched silicon diaphragm
  • Suitable for high volume and low to medium-pressure applications
  • Exempt
Merit Sensor AP
  • Merit Sensor

Merit Sensor BP Series

  • Blood pressure sensor
  • Pressure range of -30 to 300 mmHg
  • Compliant with AAMI BP22 specifications
  • Excellent burst pressure with a dielectric gel barrier
  • Solid state piezoresistive sensor
  • Air, liquid and gas compatibility
  • Compliant
BP0001 / BP0002
  • Merit Sensor

Merit Sensor BP Series (Extended)

  • Pressure range has been validated from -500 to 1000mmHg
  • Compliant with AAMI BP22 specifications from -30 to 300 mmHg
  • Excellent burst pressure with a dielectric gel barrier
  • Solid state piezoresistive sensor
  • Air, liquid and gas compatibility
  • Compliant
BP0006 / BP0007
  • Merit Sensor

Merit Sensor J Series

  • Low pressure MEMS sensing element
  • Suitable for clean, dry air and non corrosive gases
  • Bridge options of half open and closed available
  • Parts supplied as sawn wafer on tape in metal frame
  • Exempt
Merit Sensor J
  • Merit Sensor

Merit Sensor L Series

Merit Sensor L Series
  • Ultra-low pressure MEMS piezoresistive pressure sensor
  • Pressure ranges of 0.15psi, 0.3psi & 1psi
  • Constraint of Gauge
  • Temperature range −40°C to +150°C
  • Full scale outputs from 30mV to 60mV (at 5V excitation)
  • Suitable for clean, dry air and non-corrosive gases media
  • Compliant
Merit Sensor L
  • Merit Sensor

Merit Sensor LP1400 Series

  • Uncompensated surface mountable pressure sensor with J-leads
  • Suitable for ultra low pressure sensing applications
  • Designed for clean, dry air and non corrosive gases
  • Sentium® technology developed to provide a best-in-class operating temperature range and superior stability
  • Compliant
Merit Sensor LP1400
  • Merit Sensor

Merit Sensor HTS Series

  • Surface mountable analog and digital pressure sensor
  • Pressure ranges from 1 to 100 psi
  • Absolute or Gauge options available
  • Temperature range −40°C to +125°C
  • Compatible with wet, corrosive media
  • Compliant
Merit Sensor HTS
  • Merit Sensor

Merit Sensor LP1410 Series

  • Analog compensated output surface mountable pressure sensor with J-leads
  • Suitable for ultra low pressure sensing applications
  • Designed for clean, dry air and non corrosive gases
  • Sentium® technology developed to provide a best-in-class operating temperature range and superior stability
  • Compliant
Merit Sensor LP1410
  • Merit Sensor

Merit Sensor LP1420 Series

  • Digital compensated output surface mountable pressure sensor with J-leads
  • Suitable for ultra low pressure sensing applications
  • Designed for clean, dry air and non corrosive gases
  • Clock speed of 1MHz
  • Supply voltage of 5V
  • Sentium® technology developed to provide a best-in-class operating temperature range and superior stability
  • Exempt
Merit Sensor LP1420
  • Merit Sensor

Merit Sensor RS Series

  • Uncompensated packaged pressure sensor
  • Suitable for liquid, air and gases (to be determined on an application by application basis)
  • Merit Sensor is a leader in piezoresistive pressure sensing and partners with clients to create high performing solutions for a variety of applications and industries
  • Excellent performance in both constant current and constant voltage applications
  • Simple pressure source attachment and electrical connections
  • Designed for a soldered connection to wires, ribbon cable, flex strip or surface-mount pcb
  • Exempt
Merit Sensor RS
  • Merit Sensor

Merit Sensor S Series

  • Precision MEMS silicon pressure sensor die
  • Pressure ranges of 5 to 300psi / 0.34 to 21 bar
  • Pressure type of absolute or gauge
  • Temperature range −40°C to +150°C
  • Full scale outputs from 60mV to 180mV (at 5V excitation)
  • Suitable for clean, dry air and non-corrosive gases media
  • Compliant
Merit Sensor S
  • Merit Sensor

Merit Sensor TVC Series

  • Fully compensated harsh media pressure sensor
  • Designed to handle today’s toughest pressure sensing environments
  • The only requirement to operate the TVC series is a single 5VDC supply
  • No external components required for operation
  • The unique pressure port isolates on board electronics
  • Three wetted materials of silicon, glass, and ceramic
  • Able to withstand a variety of harsh media, such as fuel
  • Able to measure fuel vapour at low pressures or refrigerant gas at high pressure
  • Exempt
Merit Sensor TVC

Isabellenhütte VMI Series

Current Sensing Precision Resistor
  • Current sensing precision resistor
  • Long sided terminal surface-mount 0805 chip size
  • Resistance range from 0.01Ω to 0.05Ω
  • Tolerance of… Read More

Isabellenhütte VMI-R000 Series

Zero Ohm Jumper
  • Zero ohm jumper / Power bridge
  • Surface-mount design in a 0805 chip size
  • Resistance value of <200µΩ
  • TCR of… Read More

Isabellenhütte VMK Series

Current Sensing Precision Resistor
  • Current sensing precision resistor
  • 2-terminal surface-mount design in a 1206 chip size
  • Resistance range from 0.01Ω to 0.47Ω
  • Tolerance… Read More

Merit Sensor 7000 Series

Broad Pressure MEMS Silicon Piezoresistive Pressure Sensor
  • High-volume, medium-pressure sensing elements
  • Pressure ranges available 15psi, 50psi, 100psi, 300psi & 500psi
  • Absolute or Gauge options available
  • Temperature… Read More

Merit Sensor AP Series

Passively Compensated Pressure Sensor
  • Room temperature calibrated pressure sensor
  • Available for air, gas and liquid media
  • Custom options available
  • Utilises a piezoresistive Wheatstone bridge with a… Read More

Merit Sensor BP Series

Passively Compensated Blood Pressure Sensor
  • Blood pressure sensor
  • Pressure range of -30 to 300 mmHg
  • Compliant with AAMI BP22 specifications
  • Excellent burst pressure… Read More

Merit Sensor BP Series (Extended)

Passively Compensated Extended Blood Pressure Sensor
  • Pressure range has been validated from -500 to 1000mmHg
  • Compliant with AAMI BP22 specifications from -30 to 300… Read More

Merit Sensor J Series

Low Pressure MEMS Silicon Piezoresistive Pressure Sensor
  • Low pressure MEMS sensing element
  • Suitable for clean, dry air and non corrosive gases
  • Bridge options of half… Read More

Merit Sensor L Series

Ultra-Low Pressure MEMS Silicon Piezoresistive Pressure Sensor
  • Ultra-low pressure MEMS piezoresistive pressure sensor
  • Pressure ranges of 0.15psi, 0.3psi & 1psi
  • Constraint of Gauge
  • Temperature range −40°C… Read More

Merit Sensor LP1400 Series

Uncompensated Output Surface Mount Pressure Sensor
  • Uncompensated surface mountable pressure sensor with J-leads
  • Suitable for ultra low pressure sensing applications
  • Designed for clean, dry… Read More

Merit Sensor HTS Series

Surface Mount Digital / Analog Pressure Sensor
  • Surface mountable analog and digital pressure sensor
  • Pressure ranges from 1 to 100 psi
  • Absolute or Gauge options… Read More

Merit Sensor LP1410 Series

Analog Compensated Output Surface Mount Pressure Sensor
  • Analog compensated output surface mountable pressure sensor with J-leads
  • Suitable for ultra low pressure sensing applications
  • Designed for… Read More

Merit Sensor LP1420 Series

Digital Compensated Output Surface Mount Pressure Sensor
  • Digital compensated output surface mountable pressure sensor with J-leads
  • Suitable for ultra low pressure sensing applications
  • Designed for… Read More

Merit Sensor RS Series

Uncompensated Surface Mount Pressure Sensor
  • Uncompensated packaged pressure sensor
  • Suitable for liquid, air and gases (to be determined on an application by application basis)
  • Merit Sensor… Read More

Merit Sensor S Series

Accurate & Stable Pressure MEMS Silicon Piezoresistive Pressure Sensor
  • Precision MEMS silicon pressure sensor die
  • Pressure ranges of 5 to 300psi / 0.34 to 21 bar
  • Pressure type… Read More

Merit Sensor TVC Series

Fully Compensated Harsh Media Pressure Sensor
  • Fully compensated harsh media pressure sensor
  • Designed to handle today’s toughest pressure sensing environments
  • The only requirement to… Read More