RJ45 Data Jack

  • Weidmüller
  • Through-hole RJ45 jack
  • Category 5
  • Pitch of 1.27mm
  • Solder pin length of 3.2mm
  • Gold over nickel contact surface
  • Black in colour
  • Temperature range of −40°C to +85°C
  • EAC approved and UL listed
  • Weidmüller
  • Through-hole RJ45 jack
  • Category 5
  • Pitch of 1.27mm
  • Solder pin length of 3.2mm
  • Gold over nickel contact surface
  • Black in colour
  • Temperature range of −40°C to +85°C
  • UL listed
  • Weidmüller
  • Through-hole RJ45 jack
  • Category 5
  • Pitch of 1.27mm
  • Solder pin length of 3.2mm
  • Gold over nickel contact surface
  • Black in colour
  • Temperature range of −40°C to +85°C
  • EAC approved and UL listed
  • Weidmüller
  • Through-hole RJ45 jack
  • Category 5
  • Pitch of 1.27mm
  • Solder pin length of 3.3mm
  • Gold over nickel contact surface
  • Black in colour
  • Temperature range of −40°C to +85°C
  • UL listed
  • Weidmüller
  • Through-hole RJ45 jack
  • Category 5
  • Pitch of 1.27mm
  • Solder pin length of 2.75mm
  • Gold over nickel contact surface
  • Black in colour
  • Temperature range of −40°C to +85°C
  • UL listed
  • Weidmüller
  • Through-hole RJ45 jack
  • Category 5
  • Pitch of 1.27mm
  • Solder pin length of 2.75mm
  • Gold over nickel contact surface
  • Black in colour
  • Temperature range of −40°C to +85°C
  • UL listed
  • Weidmüller
  • Through-hole RJ45 jack
  • Category 5
  • Pitch of 1.27mm
  • Solder pin length of 3.2mm
  • Gold over nickel contact surface
  • Black in colour
  • Temperature range of −40°C to +85°C
  • EAC approved and UL listed
  • Weidmüller
  • Through-hole RJ45 jack
  • Category 5
  • Pitch of 1.27mm
  • Solder pin length of 3.2mm
  • Gold over nickel contact surface
  • Black in colour
  • Temperature range of −40°C to +85°C
  • UL listed
  • Weidmüller
  • Through-hole RJ45 jack
  • Category 5
  • Pitch of 1.27mm
  • Solder pin length of 3.2mm
  • Gold over nickel contact surface
  • Black in colour
  • Temperature range of −40°C to +85°C
  • EAC approved and UL listed
  • Weidmüller
  • Through-hole RJ45 jack
  • Category 5
  • Pitch of 1.27mm
  • Solder pin length of 4mm
  • Gold over nickel contact surface
  • Black in colour
  • Temperature range of −40°C to +85°C
  • EAC approved and UL listed
  • Weidmüller
  • Through-hole RJ45 jack
  • Category 6
  • Pitch of 1.27mm
  • Solder pin length of 3.2mm
  • Gold over nickel contact surface
  • Black in colour
  • Temperature range of −40°C to +85°C
  • EAC approved and UL listed
  • Weidmüller
  • Through-hole RJ45 jack
  • Category 6
  • Pitch of 1.27mm
  • Solder pin length of 3.2mm
  • Gold over nickel contact surface
  • Black in colour
  • Temperature range of −40°C to +85°C
  • EAC approved and UL listed

Manufacturers

Looking for RJ45 Data Jack?

Looking for RJ45 Data Jack?

The below manufacturers are all of our authorised partners that produce RJ45 Data Jack or related products.

RJ45 Data Jack

The Weidmüller OMNIMATE Data range of RJ45 jacks offers numerous benefits to meet a variety of needs regardless of the intended application. Their modular design also allows for customisable options should the standard specification not meet your needs. The following is just some of the key benefits the RJ45 Data Jack range offers:

• 90°, lying (horizontal) and 180°, standing (vertical)
• latch up / latch down
• THT, THR or SMD soldering processes
• Wide range of different design types, also with integrated LEDs and shield contact tabs
• Performance category Cat. 3 to Cat. 6
• Packed either in a tray (TY) or on a roll (tape-on-reel, RL)
• Compatible with modular RJ45 connector according to ANSI / TIA-1096-A and IEC 60603
• Dielectric strength ≥1500 V AC RMS (2250 V AC peak value) according to IEEE 802.3
• Dielectric strength ≥1500 V AC (peak value) or ≥1500 V DC according to IEC 60603

Properties and advantages:
• Extended temperature range of –40°C to +85°C for maximum performance
• Reinforced gold layer (30µ“) for improved corrosion protection
• At least 0.3mm stand-off ensures a perfect soldering result

Please be advised that due to the ongoing supply issues with raw materials affecting the global electronics industry, as well as an increase in orders received by our manufacturing partners, a large number of products are facing increased lead times in recent months. For the latest lead time and stock availability, please contact one of our engineers who will be happy to discuss lead times further and the potential for alternative parts.