Description
The RGA2012 of high temperature thin film chip resistors series from Susumu offer the designer an enhanced level of precision, reliability and expands on the original RG series by offering a maximum operating temperature of up to 230°C in a 0805 chip size. The RGA2012 series has a double layer of passivation to eliminate water ingress to the thin film element and has resistance values that range from 10Ω to 1MΩ. Tolerances options available are ±0.1% (B) and ±0.5% (D) and TCR values of ±10 ppm/°C (N) and ±25 ppm/°C (P). This resistor is AEC-Q200 compliant and is considered suitable for automotive and downhole applications.
- Surface-mount high temperature thin film chip resistor
- Resistance range between 10Ω and 1MΩ available
- Resistance value series E-24 and E-96
- Power rating of 0.1W
- Tolerance values available ±0.1% (B) and ±0.5% (D)
- TCR values available ±10 ppm/°C (N) and ±25 ppm/°C (P)
- Maximum voltage of 150V
- Temperature range of −55°C to +230°C
- Thin film structure enabling low noise and anti-sulfur
- Conductive epoxy compatible
- Chip size of 0805
- AEC-Q200 Compliant
Susumu RGA2012 series high temperature thin film chip resistors are ideal for the following applications:
- Automotive electronics
- Equipment used in high temperature enviroments
- Downhole drilling
The below table gives the full specifications of the Susumu RGA series including the RGA2012:
Please see the Susumu selection guide in the Technical Library tab for the E-24 and E-96 values