±260 ppm/°C series

Supporting Manufacturer Information


  • RARA
  • Metal clad wire wound economy resistor
  • Inductive resistance between 0.1Ω and 270Ω
  • Non-inductive resistance between 0.1Ω and 56Ω
  • Power rating of 60W
  • Insulation resistance of 20MΩ minimum
  • Short time overload of 5 x power rating is 5 seconds
  • RARA
  • Metal clad wire wound economy resistor
  • Inductive resistance between 0.1Ω and 910Ω
  • Non-inductive resistance between 0.1Ω and 110Ω
  • Power rating of 80W
  • Insulation resistance of 20MΩ minimum
  • Short time overload of 10 x power rating is 5 seconds
  • RARA
  • Metal clad wire wound economy resistor
  • Inductive resistance between 0.1Ω and 1.3kΩ
  • Non-inductive resistance between 0.1Ω and 300Ω
  • Power rating of 120W
  • Insulation resistance of 20MΩ minimum
  • Short time overload of 10 x power rating is 5 seconds
  • RARA
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 1.1kΩ
  • Power rating of 100W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series
  • RARA
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 1.75kΩ
  • Power rating of 150W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series
  • RARA
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 2.2kΩ
  • Power rating of 200W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series
  • RARA
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 2.79kΩ
  • Power rating of 250W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series
  • RARA
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 3.5kΩ
  • Power rating of 300W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series
  • RARA
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 4.45kΩ
  • Power rating of 400W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series
  • RARA
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 5.78kΩ
  • Power rating of 500W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series
  • RARA
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 5 x power rating is 5 seconds
  • RARA
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds
  • RARA
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds
  • RARA
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds
  • RARA
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds
  • RARA
  • Metal clad wire wound resistor
  • Option of flying leads (tab terminals are standard)
  • Inductive or non-inductive design
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C
  • Extruded aluminium horizontal housing
  • Short time overload of 10 x power rating is 5 seconds
Please be advised that due to the ongoing supply issues with raw materials affecting the global electronics industry, as well as an increase in orders received by our manufacturing partners, a large number of products are facing increased lead times in recent months. For the latest lead time and stock availability, please contact one of our engineers who will be happy to discuss lead times further and the potential for alternative parts.