1.5kV

SRT Microcéramique SMD High Voltage Class I Capacitors

High Voltage Class I SMD Capacitor
  • High Voltage Class I SMD Capacitor
  • Capacitance from 0.1pF to 1µF
  • TCR of ± 30ppm with 0Vdc applied
  • Voltages from 1KV to 15KV
  • Operating temperatures of -55°C to +125°C
  • Tested in accordance to CECC 32100 and AEC-Q200

SRT Microcéramique SMD High Voltage Class II Capacitors

High Voltage Class II SMD Capacitor
  • High Voltage Class II SMD Capacitor
  • Capacitance from 6.8pF to 10µF
  • TCR of ± 15% with 0Vdc applied
  • Voltages from 1kV to 15kV
  • Operating temperatures of -55°C to +125°C
  • Tested in accordance to CECC 32100 and AEC-Q200

SRT Microcéramique SMD High Voltage N2T Capacitors

High Voltage N2T SMD Capacitor
  • High Voltage N2T SMD Capacitor
  • No piezoelectric efect, high current pulse discharge
  • Capacitance from 1pF to 3.3µF
  • Voltages from 1kV to 15kV
  • Operating temperatures of -55°C to +125°C
  • Available in stack or radial

Talk to an Engineer

Get help specifying or customising the right product for your application.

SRT Microcéramique High Power Low Frequency Capacitor Series

SRT Microcéramique High Power Low Frequency Capacitor
  • MLCC high power, low capacitance variation with voltage capacitors
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
  • Insulation resistance under 20000 MOhm or 500 Ohm-Farad at 25°C under 500V
  • Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique RF Power High Frequency Capacitor Series

SRT Microcéramique RF Power High Frequency Capacitor
  • MLCC RF power, high frequency capacitors for RF instruments, lasers and similar applications
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor under 5.10-4 at 1Vrms and 1MHz for values ≤ 1000pF and under 5.10-4 at 1Vrms and 1KHz for values > 1000pF
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E

Custom Component Solutions

Working alongside your design team from the earliest stage, we help you select the right part for the application and, where a standard part will not do, develop customised components with our manufacturing partners such as lead length, termination and package size.

Related Components

Manufacturers

Looking for 1.5kV?

The below manufacturers are all of our authorised partners that produce 1.5kV or related products.

1.5kV