+44 (0) 1342 330 470

Supporting Manufacturer Information

SRT Microcéramique Product Catalogue

250V series

SRT Microcéramique SMD Extended Range Low Voltage Capacitors

SMD Low Voltage Capacitors (Extended Range)
Capacitance up to 220 µF
Voltages from 6.3V to 2000V
Operating temperature:
- NP0, X7R: -55°C to +125°C
- X5R: -55°C to +85°C
Tested in accordance with CECC 32100 and AEC-Q200

SRT Microcéramique SMD Low Voltage Class I Capacitors

Low Voltage Class I SMD Capacitor
Capacitance from 0.1 pF to 820 nF
TCR of ± 30ppm with 0Vdc applied
Voltages from 10V to 1000V
Operating temperatures of -55°C to +125°C
Tested in accordance to CECC 32100 and AEC-Q200

SRT Microcéramique SMD Low Voltage Class II Capacitors

Low Voltage Class II SMD Capacitor
Capacitance from 2.2 pF to 47 µF
TCR of ± 15% with 0Vdc applied (X7R) / +15% -25% at rated voltage (BX)
Voltages from 10V to 1000V
Operating temperatures of -55°C to +125°C
Tested in accordance to CECC 32100 and AEC-Q200

SRT Microcéramique SMD Low Voltage N2T Capacitors

Low Voltage N2T SMD Capacitor
Capacitance from 0.3 pF to 1.2 µF
TCR of -2200 ± 350 ppm/°C with 0Vdc applied
Voltages from 10V to 1000V
Operating temperatures of -55°C to +125°C
All PME SMD available in non magnetic termination

SRT Microcéramique High Voltage X7R Capacitor Series (200V-1kV)

Stable ceramic capacitor
High quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique Radial Moulded Capacitors (63V – 250V)

Radial moulded capacitor series for military applications
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1Vrms and 1kHz
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Climatic category: 55/125/56

SRT Microcéramique RF Power High Frequency Capacitor Series

MLCC RF power, high frequency capacitors for RF instruments, lasers and similar applications
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 5.10^-4 at 1V_rms and 1MHz for values ≤ 1000pF and under 5.10^-4 at 1V_rms and 1KHz for values > 1000pF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

VPG CLA Series

Thermosensitive through-hole resistor
Resistance range from 5Ω to 100Ω
Tolerance from ±0.5% available
TCR of linear +4250 ±1% ppm/°C
Power rating of 0.125W (at +70°C)
Temperature range from -65°C to +125°C

VPG NLA Series

Thermosensitive through-hole resistor
Resistance range from 5Ω and 500Ω
Tolerance from ±0.5%
TCR linear +6660 ±1% ppm/°C
Power rating of 0.125W (at +70°C)
Temperature range from -65°C to +125°C

SRT Microcéramique SMD Extended Range Low Voltage Capacitors

SMD Low Voltage Capacitors (Extended Range)
Capacitance up to 220 µF
Voltages from 6.3V to 2000V
Operating temperature:
- NP0, X7R: -55°C to +125°C
- X5R: -55°C to +85°C
Tested in accordance with CECC 32100 and AEC-Q200

SRT Microcéramique SMD Low Voltage Class I Capacitors

Low Voltage Class I SMD Capacitor
Capacitance from 0.1 pF to 820 nF
TCR of ± 30ppm with 0Vdc applied
Voltages from 10V to 1000V
Operating temperatures of -55°C to +125°C
Tested in accordance to CECC 32100 and AEC-Q200

SRT Microcéramique SMD Low Voltage Class II Capacitors

Low Voltage Class II SMD Capacitor
Capacitance from 2.2 pF to 47 µF
TCR of ± 15% with 0Vdc applied (X7R) / +15% -25% at rated voltage (BX)
Voltages from 10V to 1000V
Operating temperatures of -55°C to +125°C
Tested in accordance to CECC 32100 and AEC-Q200

SRT Microcéramique SMD Low Voltage N2T Capacitors

Low Voltage N2T SMD Capacitor
Capacitance from 0.3 pF to 1.2 µF
TCR of -2200 ± 350 ppm/°C with 0Vdc applied
Voltages from 10V to 1000V
Operating temperatures of -55°C to +125°C
All PME SMD available in non magnetic termination

SRT Microcéramique High Voltage X7R Capacitor Series (200V-1kV)

Stable ceramic capacitor
High quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique Radial Moulded Capacitors (63V – 250V)

Radial moulded capacitor series for military applications
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1Vrms and 1kHz
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Climatic category: 55/125/56

SRT Microcéramique RF Power High Frequency Capacitor Series

MLCC RF power, high frequency capacitors for RF instruments, lasers and similar applications
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 5.10^-4 at 1V_rms and 1MHz for values ≤ 1000pF and under 5.10^-4 at 1V_rms and 1KHz for values > 1000pF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

VPG CLA Series

Thermosensitive through-hole resistor
Resistance range from 5Ω to 100Ω
Tolerance from ±0.5% available
TCR of linear +4250 ±1% ppm/°C
Power rating of 0.125W (at +70°C)
Temperature range from -65°C to +125°C

VPG NLA Series

Thermosensitive through-hole resistor
Resistance range from 5Ω and 500Ω
Tolerance from ±0.5%
TCR linear +6660 ±1% ppm/°C
Power rating of 0.125W (at +70°C)
Temperature range from -65°C to +125°C

Select at least 2 products
to compare