+44 (0)1342 330 470

UL

Underwriters Laboratories® Inc. (UL) is an independent product safety certification organization Based in Northbrook, Illinois.

UL develops standards and test procedures for products, materials, components, assemblies, tools and equipment, chiefly dealing with product safety.

UL does not “approve” products. Rather it evaluates products, components, materials and systems for compliance to specific requirements, and permits acceptable products to carry a UL certification mark, as long as they remain compliant with the standards.

Weidmüller SU 10.16HP/180G Series

High power PCB connector with male header and closed housing
Rated current for minimum number of poles 78.3A (IEC) and 60A (UL)
Dimensions of L1 10.16mm to 81.28mm (depending on the number of poles required)
Pin length of 3.5mm suitable for wave soldering
Temperature range −50°C to +120°C
CSA and UL 1059 approved, IEC listed

Weidmüller SU 10.16HP

RARA ULF300C

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 3.5kΩ
Power rating of 300W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRF Series

Download Datasheet

RARA ULF300C

Weidmüller SU 10.16HP/90G Series

High power PCB connector with male header and closed housing
Rated current for minimum number of poles 78.3A (IEC) and 60A (UL)
Dimensions of L1 10.16mm to 81.28mm (depending on the number of poles required)
Pin length of 3.5mm suitable for wave soldering
Temperature range −50°C to +120°C
CSA and UL 1059 approved, IEC listed

Weidmüller SU 10.16HP

Weidmüller SV 7.62HP/180G Series

High power PCB connector with male header and closed housing
Rated current for minimum number of poles 57A (IEC) and 40.5A (UL)
Dimensions of L1 7.62mm to 83.82mm (depending on the number of poles required)
Pin length of 3.5mm suitable for wave soldering
Temperature range −50°C to +130°C
CSA and UL 1059 approved, IEC listed

Weidmüller SV 7.62HP

RARA ULF400C

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 3.08kΩ
Power rating of 400W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRF Series

Download Datasheet

RARA ULF400C

Weidmüller SV 7.62HP/90G Series

High power PCB connector with male header and closed housing
Rated current for minimum number of poles 57A (IEC) and 40.5A (UL)
Dimensions of L1 7.62mm to 83.82mm (depending on the number of poles required)
Pin length of 3.5mm suitable for wave soldering
Temperature range −50°C to +130°C
CSA and UL 1059 approved, IEC listed

Weidmüller SV 7.62HP

RARA ULF500C

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 2.46kΩ
Power rating of 500W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRF Series

Download Datasheet

RARA ULF500C

RARA ULH100F

Precision shunt resistor
4-terminal metal-clad design
Resistance value of 1.3333mΩ
Rated current of 75A
Tolerance values of ±0.1, ±0.5% or ±1.0%
Rated voltage 100mV
UL Approved

Download Datasheet

RARA ULH100F

RARA ULH200F

Precision shunt resistor
4-terminal metal-clad design
Resistance values between 0.4mΩ up to 1.3333mΩ
Rated currents from 100A up to 250A
Tolerance values of ±0.1, ±0.5% or ±1.0%
Rated voltage 100mV
UL Approved

Download Datasheet

RARA ULH200f

RARA ULH300F

Precision shunt resistor
4-terminal metal-clad design
Resistance values between 0.1250mΩ up to 0.3333mΩ
Rated currents from 300A up to 500A
Tolerance values of ±0.1, ±0.5% or ±1.0%
Rated voltages of 50mV or 100mV
UL Approved

Download Datasheet

RARA ULH300F

RARA ULH80F

Precision shunt resistor
4-terminal metal-clad design
Resistance values between 1.3333mΩ up to 3.3333mΩ
Rated current of 30A, 40A, 50A or 75A
Tolerance values of ±0.1%, ±0.5% or ±1.0%
Rated voltage 100mV
UL Approved

Download Datasheet

RARA ULH80F

RARA ULM2800

Metal clad wire wound resistor
Resistance options from 0.7Ω up to 135Ω
Power rating of up to 750W (on heatsink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRM

Download Datasheet

RARA ULM2800

RARA ULN100C

Narrow and Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 1.1kΩ
Power rating of 100W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRN Series

Download Datasheet

RARA ULN100C

RARA ULN150C

Narrow and Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 1.75kΩ
Power rating of 150W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRN Series

Download Datasheet

RARA ULN150C

RARA ULN50C

Narrow and Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 420Ω
Power rating of 50W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRN Series

Download Datasheet

RARA ULN50C