+44 (0) 1342 330 470

We’re Exhibiting at Space Tech Europe 2025

Space Tech Expo Europe, 18-20th November 2025, Bremen, Germany, Stand G56

Motion Control

Isabellenhütte’s innovative solution for battery management system applications – the IsaSCALE IVT-S is a plug-and-play module for precise current and voltage measurement in package fitting into palm of your hand.

Magnetic sensors, digital isolators and low power switch sensors based on spintronic GMR (Giant Magnetoresistance) technology from NVE Corporation, including high temperature models.

Metal clad thick film and wirewould resistors from RARA, including inductive and non-inductive designs, braking resistors.

Range of short- and long sided thin film terminals from Susumu, including models with high power handling capacity, models suppressing the surface temperature and others.

Motion Control

RARA IRM600

Metal clad wire wound resistor
Resistance options from 0.1Ω up to 94Ω
Power rating of up to 600W (on a heat sink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULM Series

RARA IRM800

Metal clad wire wound resistor
Resistance options from 0.1Ω up to 112Ω
Power rating of up to 800W (on a heat sink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULM

RARA IRN100

Flat and narrow type metal clad wire wound resistor
Cement or silicone filling material with an extruded aluminium housing
300mm flying leads
Excellent heat dissipation
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C (cement) / +150°C (silicone)
Short time overload of 5 x power rating is 5 seconds

RARA IRN150

Flat and narrow type metal clad wire wound resistor
Cement or silicone filling material with an extruded aluminium housing
300mm flying leads
Excellent heat dissipation
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C (cement) / +150°C (silicone)
Short time overload of 5 x power rating is 5 seconds

RARA IRN50

Flat and narrow type metal clad wire wound resistor
Cement or silicone filling material with an extruded aluminium housing
300mm flying leads
Excellent heat dissipation
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C (cement) / +150°C (silicone)
Short time overload of 5 x power rating is 5 seconds

RARA IRV100

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
Short time overload of 10 x power rating is 5 seconds

RARA IRV1000

Metal clad wire wound resistor
Option of flying leads, parallel or series connections
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Cement moulding with an extruded aluminium housing
Short time overload of 10 x power rating is 5 seconds

RARA IRV120

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
Short time overload of 10 x power rating is 5 seconds

RARA IRV1200

Metal clad wire wound resistor
Option of flying leads, parallel or series connections
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Cement moulding with an extruded aluminium housing
Short time overload of 10 x power rating is 5 seconds

RARA IRV150

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
Short time overload of 10 x power rating is 5 seconds

RARA IRV200

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
Short time overload of 10 x power rating is 5 seconds

RARA IRV300

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
Short time overload of 10 x power rating is 5 seconds

RARA IRV400

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
Short time overload of 10 x power rating is 5 seconds

RARA IRV500

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
Short time overload of 10 x power rating is 5 seconds

RARA IRV60

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
Short time overload of 5 x power rating is 5 seconds

RARA IRV600

Metal clad wire wound resistor
Option of flying leads, parallel or series connections
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Cement moulding with an extruded aluminium housing
Short time overload of 10 x power rating is 5 seconds

RARA IRM600

Metal clad wire wound resistor
Resistance options from 0.1Ω up to 94Ω
Power rating of up to 600W (on a heat sink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULM Series

RARA IRM800

Metal clad wire wound resistor
Resistance options from 0.1Ω up to 112Ω
Power rating of up to 800W (on a heat sink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULM

RARA IRN100

Flat and narrow type metal clad wire wound resistor
Cement or silicone filling material with an extruded aluminium housing
300mm flying leads
Excellent heat dissipation
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C (cement) / +150°C (silicone)
Short time overload of 5 x power rating is 5 seconds

RARA IRN150

Flat and narrow type metal clad wire wound resistor
Cement or silicone filling material with an extruded aluminium housing
300mm flying leads
Excellent heat dissipation
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C (cement) / +150°C (silicone)
Short time overload of 5 x power rating is 5 seconds

RARA IRN50

Flat and narrow type metal clad wire wound resistor
Cement or silicone filling material with an extruded aluminium housing
300mm flying leads
Excellent heat dissipation
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C (cement) / +150°C (silicone)
Short time overload of 5 x power rating is 5 seconds

RARA IRV100

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
Short time overload of 10 x power rating is 5 seconds

RARA IRV1000

Metal clad wire wound resistor
Option of flying leads, parallel or series connections
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Cement moulding with an extruded aluminium housing
Short time overload of 10 x power rating is 5 seconds

RARA IRV120

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
Short time overload of 10 x power rating is 5 seconds

RARA IRV1200

Metal clad wire wound resistor
Option of flying leads, parallel or series connections
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Cement moulding with an extruded aluminium housing
Short time overload of 10 x power rating is 5 seconds

RARA IRV150

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
Short time overload of 10 x power rating is 5 seconds

RARA IRV200

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
Short time overload of 10 x power rating is 5 seconds

RARA IRV300

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
Short time overload of 10 x power rating is 5 seconds

RARA IRV400

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
Short time overload of 10 x power rating is 5 seconds

RARA IRV500

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
Short time overload of 10 x power rating is 5 seconds

RARA IRV60

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
Short time overload of 5 x power rating is 5 seconds

RARA IRV600

Metal clad wire wound resistor
Option of flying leads, parallel or series connections
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Cement moulding with an extruded aluminium housing
Short time overload of 10 x power rating is 5 seconds

Resources

Related Articles